Geemarc CL Bluehook Bedienungsanleitung

CL Bluehook

User Guide p.1

CL BLUEHOOK

CONTENTS 1

INTRODUCTION 3

Unpacking 4

DESCRIPTION 5

General Description 5

LED Description 6

INSTALLATION 7

Setting Up 7

USING THE CL BLUEHOOK 11

Wearing the CL Bluehook 11

Turn the CL Bluehook On 11

Turn the CL Bluehook Off 12

Volume Adjustment 12

Receiving a Call 12

Ending a Call 13

Reject an Incoming Call 13

Making a Call 14

Last Number Redial 14

Voice Transfer 15

SPECIFICATIONS 16

TROUBLESHOUTING 17

SAFETY INFORMATION 19

GUARANTEE 20

RECYCLING DIRECTIVES 23

CONTENTS CONTENTS

1 2

Congratulations on purchasing your Geemarc CL Bluehook.

The CL Bluehook uses Bluetooth technology. Bluetooth is an

industrial specification for wireless personal area networks

(PANs). Bluetooth uses short-range radio links (up to 10

metres) in the 2.4gHz Instrumentation Scientific and Medical

(ISM) "free band". Hence, this short-range radio technology

allows the wireless networking of devices such as a mobile

phone and the CL Bluehook.

The CL Bluehook is a standard headset in accordance with

Bluetooth 2.0+EDR.

It is important that you read the instructions below in order to

use your Geemarc CL BLuehook its full potential. Keep this

user guide in a safe place for future reference.

Unpacking

When unpacking the CL Bluehook, you should find the following

in the box:

•1 CL Bluehook

•1 set of Charging Units

For product support and help visit our website at

www.geemarc.com

Telephone 01707 384438

Or fax 01707 372529

INTRODUCTION INTRODUCTION

3 4

Note: users of digital hearing aids must make sure their

aids have been programmed for use with the ‘T’ setting.

This product is ONLY suitable for use when using a

hearing aid with a T-coil.

General Description

LED Description

LED CL Bluehook Mode

LED flashes blue once every

3 seconds CL Bluehook is on but ready

for use

LED flashes blue and red

alternately CL Bluehook in waiting mode.

Ready to be paired with

another Bluetooth device

(mobile phone)

After LED flashes blue and

red alternately, it flashes blue

8 times

Connection between CL

Bluehook and mobile phone is

being established

LED flashes blue once every

2 seconds CL Bluehook is paired and

ready to be used

LED flashes red CL Bluehook battery is low

DESCRIPTION DESCRIPTION

5 6

Setting Up

Before you use the CL Bluehook, please take the following two

steps: 1.Charge the battery

2. Pair the CL Bluehook with your mobile phone

(Bluetooth connectivity feature turned on)

Battery Charging

Plug the battery charger into the mains supply and switch the

supply on. Connect the other end of the battery charger into the

charging port on the right hand side of the clip.

During charging a RED LED will be displayed. When charging

is complete, the LED will be turned off.

When using the CL Bluehook for the first time,

charging could take up to three hours. Please wait

until the RED LED is turned off.

If the RED LED flashes whilst in standby, the CL Bluehook

needs recharging.

Note :

Do not overcharge the CL Bluehook. Once the RED LED is no

longer displayed, remove the charging unit.

Do not use the CL Bluehook whilst it is being charged.

CL Bluehook Pairing

In order to use the CL Bluehook, it must be paired with a mobile

phone.

Pairing is the process of associating Bluetooth devices with

each other. When two devices are paired, they establish a

permanent, secure link with each other. Paired devices remain

paired even when one of the devices is off or the service

connection is stopped/interrupted. Therefore, pairing only

needs to take place once.

INSTALLATION INSTALLATION

7 8

Set the CL Bluehook to power-on mode (press

Multifunction Speaking Button for 5 seconds until the

BLUE LED flashes every 3 seconds)

Ensure there are no other Bluetooth devices in pairing

mode within a 10 metre range of the CL Bluehook

Press and hold VOL+ and VOL-simultaneously for about

3 seconds until the BLUE and RED LED flash alternately.

You are now in waiting mode.

Select Bluetooth for the connectivity type on your mobile

phone

Set the mobile phone to search and add a new paired

device (see mobile phone user guide).

N.B. When the mobile phone finds the CL Bluehook, it

may appear as BT019 in the list of paired devices – this

is ok.

On finding the the CL Bluehook, the mobile phone will

ask for an input ID code. Enter the PIN code of “0000”

The BLUE LED should now flash slowly to indicate

successful pairing.

The CL Bluehook is now in standby and can be used as

required.

INSTALLATION INSTALLATION

9 10

Wearing the CL Bluehook

You can clip the CL Bluehook onto your clothes and place the

hook over your left or right ear.

Turn the CL Bluehook On

Press Multifunction Speaking Button for 5 seconds until the

BLUE LED flashes. If there is a successful connection, the

BLUE LED will start to flash once every 3 seconds.

If you have already paired the CL Bluehook with a mobile

phone, the CL Bluehook and the mobile phone will connect

automatically when the CL Bluehook is turned on.

Turn the CL Bluehook Off

Press Multifunction Speaking Button for 3 seconds until the

RED LED flashes. A voice or a beep will be heard from the CL

Bluehook. Release the Multifunction Speaking Button and the

CL Bluehhok will now turn off.

Volume Adjustment

To increase the volume during a call, press VOL+ gently. To

decrease the volume during a call, press VOL- gently.

Receiving a Call

Press Multifunction Speaking Button to receive the call. The

microphone on the clip will pick up your voice and you will hear

everything via the ear hook.

USING THE CL BLUEHOOK USING THE CL BLUEHOOK

11 12

Note: users of digital hearing aids must make sure their

aids have been programmed for use with the ‘T’ setting.

Ending a Call

When your conversation has ended, press Multifunction

Speaking Button to end the call.

Reject an Incoming Call

Press VOL-for 3 seconds until you hear a beep, then release

the button. This will reject an incoming call.

Making a Call

Dial the telephone number on the mobile phone as normal.

Once the call is placed, the CL Bluehook will carry the

conversation.

You can make a call via voice command if your mobile phone

supports this function. The mobile phone must be set to hands

free mode. Press and hold VOL+ until you hear a prompt. Say

the required name or telephone number loudly and clearly

towards the microphone on the CL Bluehook. The required

telephone number will be dialed automatically.

Last Number Redial

Press VOL-for 3 seconds until you hear a beep, then release

the button to perform last telephone number redial.

Note: This can only take place when in standby mode.

This function only works correctly if the mobile phone has been

set to hands free mode.

USING THE CL BLUEHOOK USING THE CL BLUEHOOK

13 14

Voice Transfer

If you need to make a call using the mobile phone without the

CL Bluehook, press VOL+ for 3 seconds.

Working Frequency 2.4-2.4835 gHz ISM Band

Bluetooth Criterion V2.0+EDR

RF Output Power -6 - +4dBm (class2)

RF Sensitivity Superior -75dBm

Effective Distance maximum without obstacle 10m

Working Indication 2 LED (blue and red)

Battery Rechargeable Lithium Polymer

Battery

Speaking Time Approx 12 hours

Standby time Approx 250 hours

Charging Time Approx 2-3 hours

Audio Output Power (RL=32ohm) 2.5mw

Working temperature -10C - +45C

Storage Temperature -20C - +65C

Size 54 x 25.5 x 24 mm

Weight 22.5g

USING THE CL BLUEHOOK SPECIFICATION

15 16

The RED LED is flashing

•Charge the battery

The CL Bluehook keeps on switching off

•Make sure that the batteries are fully charged

•Make sure you are within a 10 meter range of the

mobile phone

Experiencing interference when using the CL

Bluehook

•Wireless telephones and wireless networks may

cause interference. Keep as far away as possible

from these devices whilst using the CL Bluehook.

Mobile phone has shown connection with the

CL Bluehook, however, the CL Bluehook

appears not to work

•Ensure the mobile phone is switched to Bluetooth

setting

•Switch the CL Bluehook off and then on again

•Delete the existing Bluetooth connection, then pair

the devices together again

•Make sure you are within 10 meter range of the

mobile phone

•Make sure that the batteries are fully charged

TROUBLESHOOTING TROUBLESHOOTING

17 18

Andere Handbücher für CL Bluehook

Inhaltsverzeichnis

Andere Geemarc Hörgerät Handbücher

Geemarc

Geemarc CLA 7 Bedienungsanleitung

Geemarc

Geemarc CL7060 Gebrauchsanweisung

Geemarc

Geemarc loopHEAR LH100 Bedienungsanleitung

Geemarc

Geemarc ClearSound CL7100 Bedienungsanleitung

Geemarc

Geemarc CL7300 Clearsound Bedienungsanleitung

Geemarc

Geemarc t-LOOP Bedienungsanleitung

Geemarc

Geemarc CL7300 Clearsound Bedienungsanleitung

Geemarc

Geemarc NeckLoop CLA 7 Bedienungsanleitung

Geemarc

Geemarc CLA3 A-USB Bedienungsanleitung

Geemarc

Geemarc CL7300 Clearsound Bedienungsanleitung

Geemarc

Geemarc ClearSound LoopHEAR 101 Bedienungsanleitung

Geemarc

Geemarc LoopHEAR 102 Bedienungsanleitung

Geemarc

Geemarc CL7200 Bedienungsanleitung

Geemarc

Geemarc ClearSound CL7100 Bedienungsanleitung

Geemarc

Geemarc CLA9 Bedienungsanleitung

Geemarc

Geemarc iLoop Bedienungsanleitung

Geemarc

Geemarc CLA9 Bedienungsanleitung

Geemarc

Geemarc CL7310AD Bedienungsanleitung

Geemarc

Geemarc CL Bluehook Bedienungsanleitung

Geemarc

Geemarc LOOPHEAR 10 Bedienungsanleitung

Geemarc

Geemarc iLoop Plus Bedienungsanleitung

Geemarc

Geemarc CLA9 Bedienungsanleitung

Beliebte Hörgerät Handbücher anderer Marken

Sonic

Sonic Bliss miniBTE Bedienungsanleitung

Lexie

Lexie B1 Stücklistenhandbuch

Widex

Widex FM+DEX Bedienungsanleitung

Camplicomms

Camplicomms HC-200 Bedienungsanleitung

Phonak

Phonak Q90 Bedienungsanleitung

Williams Sound

Williams Sound SoundPlus WIR 237 Leitfaden

Oticon Medical

Oticon Medical Ponto SoundConnector Bedienungsanleitung

Siemens

Siemens Life micon Bedienungsanleitung

Starkey

Starkey Destiny Bedienungsanleitung

Audicus

Audicus The Icon Bedienungsanleitung

Advanced Bionics

Advanced Bionics Slim HP Standard Bedienungsanleitung

Widex

Widex DREAM440 THE DREAM SERIES Bedienungsanleitung

Phonak

Phonak myPilot Bedienungsanleitung

NIKEN

NIKEN NK-401 Bedienungsanleitung

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung

Sonetik

Sonetik GOHEAR Bedienungsanleitung

Widex

Widex FL-9 Bedienungsanleitung

Siemens

Siemens MUSIC Pro Pro IT Bedienungsanleitung