Gefen EXT-2DVIKVM-ELR Bedienungsanleitung

www.gefen.com

2x DVIKVM

Extender

EXT-2DVIKVM-ELR

User Manual

ASKING FOR ASSISTANCE

Rev A2

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday.

Write To:

Gefen LLC

c/o Customer Service

20600 Nordhoff St

Chatsworth, CA 91311

www.gefen.com

[email protected]

Notice

Gefen LLC reserves the right to make changes in the hardware, packaging, and

any accompanying documentation without prior written notice.

2x DVIKVM Extender is a trademark of Gefen LLC

All trademarks are the property of their respective owners.

CONTENTS

1 Introduction

2 Operation Notes

3 Features

4 Sender Unit Layout

5 Sender Unit Descriptions

6 Receiver Unit Layout

7 Receiver Unit Descriptions

8 Connecting the 2x DVIKVM Extender

8 Wiring Diagram

9 DIPSwitchConguration

11 Network Cable Wiring Diagram

12 Rack Tray Installation

13 Troubleshooting

14 Specications

15 Warranty

Congratulations on your purchase of the Gefen 2x DVIKVM Extender.

Your complete satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions

that harness integration, extension, distribution and conversion technologies.

Gefen’s reliable, plug-and-play products supplement cross-platform computer

systems, professional audio/video environments and HDTV systems of all sizes

with hard-working solutions that are easy to install and simple to operate.

The Gefen 2x DVIKVM Extender

The 2x DVIKVM Extra Long Range Extender Over Two CAT5 extends any two

DVI sources and USB to two monitors, touch screen displays, or digital signage

applications up to 330 feet (100 meters), using two CAT-5e cables. USB 2.0 data

rates up to 100 Mbps are supported in addition to backward-compatibility with

USB 1.1. The Receiver unit allows the connections of up to three USB devices,

providing access to printers, scanners, cameras, external storage media, digital

signage, and automated control systems. This product uses Gefen ELR

technology, allowing DVI and USB signals to travel along the same CAT-5e

cables, reducing cabling costs and providing easier installation.

How It Works

Place the 2x DVIKVM Extender Sender unit next to the DVI sources. Use the

included DVI cables to connect the DVI sources to the Sender unit. Use the

supplied USB cable to connect the USB host (source) device to the USB port on

the Sender unit. Connect the Receiver unit to the displays with DVI cables.

Connect the USB devices to the Receiver unit. Use two CAT-5e cables, each up

to 330 feet (100 meters), to connect the Sender to the Receiver unit. Connect the

included locking power supplies to the Sender and Receiver units and plug both

power cords into available electrical outlets.

INTRODUCTION

OPERATION NOTES

PLEASE READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE 2X DVIKVM EXTENDER

• Cat-5 or Cat-6 cables should not exceed 330 feet (100 meters).

• Shielded (STP) Cat-5 or Cat-6 is recommended. However, un-shielded

(UTP) Cat-5 or Cat-6 is acceptable.

NOTE: The shielded cable has an advantage by providing immunity to

Electromagnetic Interference (EMI), cell phones and A/C motors.

• The Gefen 2x DVIKVM Extender features the ability to generate compatible

EDID and Hot Plug signals when working with different brands of source

devices and monitors.

• This product supports HDCP with HDMI sources.

• Dual-link resolutions are not supported.

FEATURES

Features

• Extends two DVI sources and USB up to 330 feet (100 meters)

• Supports resolutions up to 1920 x 1200

• Supports 100 Mbps using USB 2.0

• Backward-compatible with USB 1.1 devices

• Field-upgradeable via mini-USB service port

• Supports DDWG standard for DVI-compliant monitors

• Supports any Operating System (OS)

• EDID management for rapid integration of source and display devices

• ELR and HDBaseT® technologies allow extension up to

330 feet (100 meters)

• Rack-mountable

Applications

• Ideal for digital signage applications

• Extension of KVM workstations

Package Includes

(1) 2x DVIKVM Extender - Sender unit

(1) 2x DVIKVM Extender - Receiver unit

(2) 6 ft. DVI cables

(1) 6 ft. USB cable

(2) 5V DC Locking Power Supplies

(2) AC Power Cords

(1) Set of Rack Ears

(1) Quick-Start Guide

SENDER UNIT LAYOUT

Front

Back

1 3 6

814

9 10 12 13

1 Link 2

This LED glows bright blue when the Sender Unit and Receiver Unit are

connected using Cat-5 / Cat-6 cable.

2 DVI 2

ThisLEDasheson(brightblue)andoffwhenaDVIvideosourceisconnected

to the Sender Unit. The Sender Unit and Receiver Unit must also be connected

using a Cat-5 / Cat-6 cable.

3 Power Indicator

This LED will turn bright blue once the included 5V DC locking power supply has

been connected and plugged into an available electrical outlet.

4 Link 1

This LED glows bright blue when the Sender Unit and Receiver Unit are

connected using Cat-5 / Cat-6 cable.

5 USB

This LED glows bright blue when a USB source is connected to the Sender Unt.

6 DVI 1

ThisLEDasheson(brightblue)andoffwhenaDVIvideosourceisconnected

to the Sender Unit. The Sender Unit and Receiver Unit must also be connected

using a Cat-5 / Cat-6 cable.

7 Service

Mini-USBserviceportusedforupgradingthermware(primaryboard).

8 Link 1

Connects the Sender Unit to the Receiver Unit using Cat-5 / Cat-6 cable.

9 DVI In 1

Connect a DVI cable from the computer to this DVI-I connector.

10 USB In

Connects a USB cable from this port to the computer.

11 Service

Mini-USBserviceportusedforupgradingthermware(secondaryboard).

12 Link 2

Connects the Sender Unit to the Receiver Unit using Cat-5 / Cat-6 cable.

13 DVI In 2

Connect a DVI cable from the computer to this DVI-I connector.

14 5V DC Locking Power Connector

Connect the included 5V DC locking power supply to this connector.

SENDER UNIT DESCRIPTIONS

RECEIVER UNIT LAYOUT

Front

Back

1 3 6

8 9 10 12 13

Inhaltsverzeichnis

Andere Gefen Extender Handbücher

Gefen

Gefen CAT5-4000 Bedienungsanleitung

Gefen

Gefen HDMI CAT-5 Bedienungsanleitung

Gefen

Gefen EXT-CAT5-1600A Bedienungsanleitung

Gefen

Gefen DVI-CAT5-4X Bedienungsanleitung

Gefen

Gefen EXT-DVIRS232-1FO Bedienungsanleitung

Gefen

Gefen GEF-DVI-FM2000 Bedienungsanleitung

Gefen

Gefen EXT-COMPOS ITE -141N Bedienungsanleitung

Gefen

Gefen DVI-3000HDS Bedienungsanleitung

Gefen

Gefen USB-MINI2 Bedienungsanleitung

Gefen

Gefen EXT-VGA-141SRN Bedienungsanleitung

Gefen

Gefen DVI 1500 Bedienungsanleitung

Gefen

Gefen FW-1394 Bedienungsanleitung

Gefen

Gefen DVI-141DLB Bedienungsanleitung

Gefen

Gefen GTB-DVIKVM-ELR Bedienungsanleitung

Gefen

Gefen EXT-DVIKVM-ELR Bedienungsanleitung

Gefen

Gefen EXTENDIT CAT5 8000S Bedienungsanleitung

Gefen

Gefen GBT-HDBT-POL Bedienungsanleitung

Gefen

Gefen EXT-DVI-3500HD Bedienungsanleitung

Gefen

Gefen USB-MINI Bedienungsanleitung

Gefen

Gefen DVI-141B Bedienungsanleitung

Gefen

Gefen CAT5-5000 Bedienungsanleitung

Gefen

Gefen ex-tend-it DVI-CAT5 Bedienungsanleitung

Gefen

Gefen VGA-141LR Bedienungsanleitung

Gefen

Gefen CAT5-2000 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung