Gefen EXT-HDMI1.3-1CAT6 Bedienungsanleitung
www.gefen.com
www gefen com
Extender for
1.3 over
one CAT-6
EXT-HDMI1.3-1CAT6
User Manual
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday (PST).
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hard ware, packaging and
any accompanying doc u men ta tion without prior written notice.
Extender for HDMI 1.3 over one CAT6 is a trademark of Gefen Inc.
© 2009 Gefen Inc., All Rights Reserved
All trademarks are the property of their respective companies
ASKING FOR ASSISTANCE
RevB
CONTENTS
1 Introduction
2 Operation Notes
3 Features
4 Sender Panel Layout
5 Sender Panel Descriptions
6 Receiver Panel Layout
7 Receiver Panel Descriptions
8 Connecting And Operating The Extender
9 DIP Switch Configuration
11 Network Cable Wiring Diagram
12 Specifications
13 Warranty
1
Congratulations on your purchase of the Extender for HDMI 1.3 over one CAT6.
Your complete satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen Extender for HDMI 1.3 over one CAT6
The Gefen Extender for HDMI 1.3 over one CAT6 will send a 1080p@60Hz
HDMI 1.3 signal with 12-bit Deep Color support over a single CAT-6a cable at
distances of up to 175 feet (50m).
HDMI 1.2 is still fully supported and can be extended up to 200 feet (60m)
at resolutions of 1080i/p@60Hz.
Extension of high def nition can now be simplif ed with the use of only a single
CAT-6a cable. Previous solutions used two cables to accomplish this.
The Gefen Extender for HDMI 1.3 over one CAT6 supports the HDMI 1.3
specif cation with features such as Deep Color, Full 1080p HD and compressed
lossless audio formats such as Dolby TrueHD and DTS-HD Master Audio.
The CAT6 extender’s pure digital transmission method insures 100% signal
integrity over this single cable extension solution.
How It Works
The Gefen Extender for HDMI 1.3 over one CAT6 system consists of send and
receive units. The HDMI source (set-top box, DVD player, or gaming console)
connects to the sender unit with the supplied 6-foot HDMI cable. The receiver
unit connects to an HDTV display. One CAT-6a cable links the sender and
receiver together at distances of up to 200 feet. Power is applied to both the
sender and receiver with the included 5V DC power supplies. A perfect image is
now displayed on the remote HDTV display.
Note: This product is an HDCP pass-through device.
INTRODUCTION
2
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE EXTENDER FOR HDMI 1.3 OVER ONE CAT6
• The Extender for HDMI 1.3 over one CAT6 was designed for use with high
quality CAT-6a (augmented) cabling. This unit will either not perform to
specif cation or refuse to operate completely if cabling other than CAT-6a is
used.
• When f eld terminating CAT-6a cabling please adhere to the TIA/EIA-568-B
specif cation. Please see page 9 for more information.
• The Extender for HDMI 1.3 over one CAT6 has a maximum distance
rating based on the bandwidth (i.e. resolution and color) of the video being
transmitted. The following specif cations are based on high quality CAT-6a
cabling.
• 200 feet (60 meters) at 1080p/60Hz with up to 10-bit color depth and
with all HDMI 1.2/1.3 audio formats.
• 150 feet (50 meters) at 1080p/60Hz with up to 10-bit color depth and
with all HDMI 1.3 audio formats.
• 66 feet (20 meters) at 1080p/60Hz with up to 12-bit color depth and all
HDMI 1.3 audio formats.
• The Extender for HDMI 1.3 over one CAT6 is HDMI 1.3 and HDMI 1.2
compliant.
• This product features HDCP pass-through.
• By default, Deep Color support is disabled. To enable Deep Color support
please see the DIP switch conf guration guide on page 9. Please note that
once Deep Color is enabled, distance performance will be limited to 150 feet
(50 meters) with premium CAT-6a cabling.
3
Features
• Flexible extension of high-bandwidth HDMI 1.3 thanks to inexpensive and
widely-available CAT6 cable
• Audio and video are transmitted digitally over the CAT6 cable for zero signal
loss
• Single Link Range (maximum resolution): 1080p/60, 12-bit color depth
• Compliant with HDMI 1.3, HDMI 1.2, HDCP 1.1 and DVI 1.1 standards
• Supports digital video formats in Deep Color Mode at up to 12bits/color
• Supports lossless compressed digital audio (Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master Audio)
• Equalizes incoming HDMI signal and retransmits it with optimal quality
regardless of incoming signal quality
• Eliminates equipment noise in the viewing environment
• Improved compensation for cable skew
HDMI 1.3 Features Supported:
• Dolby TrueHD & DTS Master Audio
• Deep Color Supported (XV Color)
• 225 MHz (up to 12 bit YUV 444 @ 1080p)
• CEC Protocol Pass Through
• Lip-Sync Pass Through
Package Includes
(1) Extender for HDMI 1.3 over one CAT6 Sender
(1) Extender for HDMI 1.3 over one CAT6 Receiver
(1) 6 Foot HDMI to HDMI Cable (M-M)
(2) 5V DC Power Supply
(1) User’s Manual
FEATURES
4
Front Panel
Back Panel
1 2 3
4
SENDER PANEL LAYOUT
5
1 5V DC Power Receptacle
Connect the included 5V DC power supply between this input and an open wall
power socket.
2 Power LED Indicator
This LED will become active once the included 5V DC power supply is properly
connected between the unit and an open wall power socket.
3 HDMI Input With Mono•LOK Secure Connector
This input will accept a single HDMI source for extension. This input features a
Mono•LOK connector (Gefen part# CAB-HDMI-LCK-XXMM) for a secure cable
connection. This input will accept a standard or Mono•LOK style HDMI cable.
4 Link RJ45 Port
This port is used to connect the sending and receiving units together using a
CAT-6a cable.
SENDER PANEL DESCRIPTIONS
6
Front Panel
Back Panel
1 2 3
5
4
RECEIVER PANEL LAYOUT
7
1 Equalization Adjustment
This trimpot is used to equalize the signal to compensate for the extension
distance and the quality/skew variances that are found in different CAT-6a
cabling brands.
2 HDMI Input With Mono•LOK Secure Connector
This input will accept a single HDMI source for extension. This input features a
Mono•LOK connector (Gefen part# CAB-HDMI-LCK-XXMM) for a secure cable
connection. This input will accept a standard or Mono•LOK style HDMI cable.
3 Power LED Indicator
This LED will become active once the included 5V DC power supply is properly
connected between the unit and an open wall power socket.
4 5V DC Power Receptacle
Connect the included 5V DC power supply between this input and an open wall
power socket.
5 Link RJ45 Port
This port is used to connect the sending and receiving units together using a
CAT-6a cable.
RECEIVER PANEL DESCRIPTIONS
Inhaltsverzeichnis
Andere Gefen Extender Handbücher
Gefen
Gefen EXT-VGAAUD-CAT5-142 Bedienungsanleitung
Gefen
Gefen DVI-CAT5-4X Bedienungsanleitung
Gefen
Gefen HDMI-1000HD Bedienungsanleitung
Gefen
Gefen DVI-2000HD Bedienungsanleitung
Gefen
Gefen EXT-DVI-FM2500 Bedienungsanleitung
Gefen
Gefen GTV-WHD-60G Bedienungsanleitung
Gefen
Gefen GTV-HDBT-CAT5 Bedienungsanleitung
Gefen
Gefen CAT5-9000 Bedienungsanleitung
Gefen
Gefen EXT-UHD600-1SC Bedienungsanleitung
Gefen
Gefen CAT5-9000I Bedienungsanleitung
Gefen
Gefen EXT-HDMI1.3-CAT5-ELR Bedienungsanleitung
Gefen
Gefen EXT-DP-CAT7 Bedienungsanleitung
Gefen
Gefen VGA Extender SRN Bedienungsanleitung
Gefen
Gefen EXT-CAT5-1500HD Bedienungsanleitung
Gefen
Gefen CAT5-7500HD Bedienungsanleitung
Gefen
Gefen RS-232 Bedienungsanleitung
Gefen
Gefen DVI-1000ST Bedienungsanleitung
Gefen
Gefen MS Bedienungsanleitung
Gefen
Gefen EXT-2DVI-DLKVM-CAT6 Bedienungsanleitung
Gefen
Gefen ex-tend-it CAT5-1500 Bedienungsanleitung
