GEIGER SOLIDline-MOR GU4510 Bedienungsanleitung
1
www.geiger.de EN
EN
DE
EN
FR
IT
Bedienungsanleitung
Operating Instructions
Manuel d’utilisation
Istruzioni per l’uso
Tubular motor:
GEIGER-SOLIDline-MOR
Motor control:
GEIGER-Spindle
for rolling shutters, awnings and screens
2Gerhard Geiger GmbH & Co. KG | 100W1502 0519V000
en
EN
EN
Index
1. General information .........................................................3
2. Guarantee ..........................................................................3
3. Safety information ............................................................3
4. Intended use .....................................................................4
5. Installation instructions ...................................................5
6. Setting of the end stops ...................................................6
7. Declaration of conformity ................................................7
8. Information for the specialist electrician .......................7
9. Notes on waste disposal .................................................7
10. What to do if… ..................................................................8
Technical data
Technical data tubular motor SOLIDline-MOR (GU45..)
GU4510 GU4520 GU4530 GU4540 GU4550
Voltage 230 V~/50 Hz
Current 0,47 A 0,63 A 0,8 A 1,0 A 1,0 A
Cos Phi (cosj)>0,95
Inrush current (factor) x 1,2
Power 105 W 140 W 180 W 220 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
Speed of rotation 16 1/min 16 1/min 16 1/min 16 1/min 12 1/min
Protection type IP 44
Total length 611 mm 641 mm 661 mm 681 mm 681 mm
Operating type S2 4 min S2 5 min S2 4 min S2 4 min S2 4 min
Diameter 45 mm
Limit switch range 22 rotations
Crank reduction 24:1
Weight approx.
3,10 kg
approx.
3,40 kg
approx.
3,60 kg
approx.
3,90 kg
approx.
3,90 kg
Storage temperature/
Humidity
T = -15°C .. +70°C / dry and non-condensing place
Subject to technical modifications. Please find information to the ambient
temperature range of our GEIGER motors under www.geiger.de
3
www.geiger.de EN
EN
1. General information
Dear customer,
By purchasing a GEIGER tubular motor you have decided on a quality product from
GEIGER.
Thank you very much for your decision and the confidence placed in us.
Before you put this drive into operation please observe the following safety
information. It serves for the prevention of danger and for the avoidance of personal
injury and damage to property.
Please retain this information for future reference.
fSuitable for all rolling shutter systems and screens
fSuitable for all folding arm awnings
fInstallation without stops possible
2. Guarantee
In the case of incorrect installation contrary to the operating instructions and/
or constructional modification, the legal and contractual guarantee for property
damage and product liability lapses.
3. Safety information
I ATTENTION: Important safety information. For personal safety, it is
important to follow these instructions. The instructions should be
kept.
fThis appliance is not to be used by persons (including children) whose
physical, sensorial or mental capacities are impaired, or who have no
expe rience or know-how, unless they have been supervised or been given
instructions on the use of the appliance by someone who is responsible for
their safety.
fChildren must be supervised to make sure they do not play with the
appliance.
fThe installation is to be checked regularly for defective balance, wear and
damage.
fDamaged connecting leads must be replaced by the GEIGER connecting
lead of the same wire type.
fDuring operation observe the danger zone.
fIf people or objects are in the danger zone, do not use the installation.
fUrgently shut down damaged installations until repair.
fUnconditionally shut down the unit during maintenance and cleaning
operations.
fPinching and shearing sites are to be avoided and to be safeguarded
against.
fWhen operating the manual actuator with the open sun protection system,
exercise caution as it can fall down quickly if springs expand or are broken.
fDo not operate the device if operations such as, for example, window
cleaning are to be carried out in the vicinity.
fDisconnect the device from the mains power supply if operations such as,
for example, window cleaning are being carried out in the vicinity.
4Gerhard Geiger GmbH & Co. KG | 100W1502 0519V000
en
EN
EN
I ATTENTION: Important safety information. Follow all installation
instructions, as incorrect installation can lead to serious injuries.
fConnection must be carried out by a skilled electrician according to the
regulations in force locally.
fThe mains plug of the tubular motor must be accessible after installation.
fOn the installation of the tubular motor without mechanical protection of
the driven parts, the tubular motor must be installed at a height of at least
2.5 m above the ground or of another level which provides access to the
drive.
fBefore the tubular motor is installed, all leads which are not needed are to
be removed and all equipment which is not needed for actuation is to be
put out of operation.
fIf the tubular motor is controlled by a switch or pushbutton, the switch
or pushbutton must be mounted within eyeshot of the tubular motor. The
switch or pushbutton must not be located in the vicinity of moving parts.
The height of installa tion must be at least 1.5 m above the floor.
If the apparatus is equipped without a pin and a socket connector (STAS3K)
in the connecting lead, or other means for disconnecting from the mains
with at least a 3 mm contact opening on each pole, a disconnecting device
of this type must be incorporated into the permanently installed electrical
installation according to the wiring rules.
fPermanently installed control devices must be attached visibly.
fThe correct dimensioning of the drive is to be observed.
4. Intended use
The tubular motors of the model range SOLIDline-MOR with the Spindle system
are designed exclusively for the operation of rolling shutters, awnings and screens.
If the tubular motors are used for other applications and/or modifications are
performed to the tubular motors, which have not been discussed with GEIGER
Antriebstechnik, then the manufacturer is not liable for personal injury and/or
damage to property and for consequential damage.
I If the motor is already installed in the system, the sun protection may
only be moved by means of the SOLIDline MOR or operated manually by
crank. No other types of drives (for example, a cordless screwdriver) are
permitted because they might cause damage to the limit stop.
5
www.geiger.de EN
EN
5. Installation instructions
Before fixing, the strength of the masonry or of the subsurface is to be checked.
I Prior to installation please check to ensure there is no visible damage to
the motor like cracks or open cables.
I Caution: If the tube is screwed/riveted to the drive, the measure must
be taken from the tube end to the center of the drive and marked on the
tube.
When inserting into the shaft, the tubular motor
must not be struck and must not be allowed to fall
into the shaft.
When drilling the winding shaft never drill into the
area of the tubular motor!
Installation into the rolling shutter:
Fix the engine bearer into the shutter box.
Following options are available:
– Star-shaped engine bearer (M45F889)
– Fixation plate (M45F395)
– Clamp engine bearer (M45F885)
– Square bracket fixation (M45F397)
Insert the motor into the shaft with a suitable
adapter/drive up to the stop of the shaft adapter.
Insert the roller capsule on the opposite side.
Screw the square fixation (M45F396) with the
motor head.
On the opposite side pull out the roller capsule until
the bolt fits into the ball bearing.
Screw together the roller capsule with the shaft.
Screw together the shaft with the tube drive.
Secure the rolling shutter curtain to the shaft.
Alternative: screw the motor directly to the bracket (pitch circle 48 mm).
Installation into awnings and screens:
Insert the motor into the shaft with a suitable
adapter/drive up to the stop of the shaft adapter.
If available insert eyelet with extension into the
motor head and secure with Allen screw.
Fix the engine bearer to the awning.
Following options are available:
– Star-shaped engine bearer (M45F889)
– Fixation plate (M45F395)
Fix the motor together with the shaft on the engine
bearer and secure.
I The GEIGER SOLIDline motor is suitable for shaft diameters
from 50 mm!
6Gerhard Geiger GmbH & Co. KG | 100W1502 0519V000
en
EN
EN
6. Setting of the end stops
I CAUTION: In the factory setting, the motor can make 2 rotations in
both directions.
Setting the upper end position
Press the UP key until the hanging automatically
stops.
Depending on the installation, turn the
corresponding setting screw while pressing the UP
key in PLUS direction until the selected upper end
position is reached.
In case the upper end position is overrun
(the motor switches off too late):
• Press the DOWN key until the hanging is below the selected end position.
• Turn the setting screw a few turns in the direction opposite the PLUS direction
and repeat the above procedure again.
Setting the lower end position
Press the DOWN key until the hanging automati-
cally stops.
Depending on the installation, turn the
corresponding setting screw while pressing the
DOWN key in PLUS direction until the selected
lower end position is reached.
In case the lower end position is overrun (the
motor switches off too late):
• Press the UP key until the hanging is above the selected end position.
• Turn the setting screw a few turns in the direction opposite the PLUS direction
and repeat the above procedure again.
7
www.geiger.de EN
EN
7. Declaration of conformity
We herewith explicitly declare that this product complies with the essential require-
ments and relevant directives. It is authorised for use in all EC member states and
in Switzerland without any need of prior registration. The Declaration of Conformity
concerning this product is available on our website: www.geiger.de.
8. Information for the specialist electrician
H Caution: Wrong installation and
wrong connection can lead to serious
injuries.
Because of back-voltage of the capacitor, the
parallel connection of the SOLIDline-MOR Spindle
is not permissible.
Please do not use any installation switch which
allows simultaneous up and down controls.
When changing the running direction the
switchover must be effected through an off-
position.
When changing the running direction the
switchover time must be at least 0.5 s.
Connecting cables with plug connectors of the
Hirschmann Company, type STAS 3K, may only
be used in connection with the Hirschmann cable
socket STAK 3K.
9. Notes on waste disposal
Recycling of packaging materials
In the interest of environmental protection, please
contact your local government’s recycling or solid
waste management department to learn more
about the services it provides.
Waste disposal of electric and electronic
equipment
Electronic equipment or batteries cannot be
discarded along with the normal household waste.
Keep for more information on the recycling and
disposal methods envisaged by the local regula-
tions in your area.
12 3
PE N
L1
N
PE
Electronic /
mechanical
limit stop
blue
brown
black
green/yellow
Mains: 230V / 50Hz
8Gerhard Geiger GmbH & Co. KG | 100W1502 0519V000
en
EN
EN
For technical questions, please call our service team at: +49 (0) 7142 938 333.
They will be happy to assist you.
Gerhard Geiger GmbH & Co. KG
Schleifmühle 6 | D-74321 Bietigheim-Bissingen
T +49 (0) 7142 9380 | F +49 (0) 7142 938 230
info@geiger.de | www.geiger.de
10. What to do if…
Problem Solution
Motor does not run. • Motor not plugged in.
Please check the plug connection.
• Check connecting cable for possible
damage.
• Check the mains voltage and allow the
cause of the voltage break down to be
tested by a specialist
electrician.
Instead of in the upwards direction, motor
runs downwards.
• The control leads are interchanged.
Exchange black/brown control leads.
Motor only runs in one
direction.
• Motor in the end position.
Run motor in the opposite direction.
After running several times,
the motor breaks down and
no longer responds.
• The motor became too hot and has
switched off.
Try it again after a cooling time of about
15 min.
The adjusted end position
is not correct.
• Reset the end position with the setting
screw
• Actuator does not rotate simultaneously.
Push shaft onto tube actuator, repeat
adjustment process.
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere GEIGER Motor Handbücher
GEIGER
GEIGER SOLIDline SoftPlus-Qi GU45-E09 Series Bedienungsanleitung
GEIGER
GEIGER GEIGER-SoftZero-55 Bedienungsanleitung
GEIGER
GEIGER GJ56 E06 Series Bedienungsanleitung
GEIGER
GEIGER SOLIDline GJ56 Series Bedienungsanleitung
GEIGER
GEIGER SOLIDline GU45 Series Bedienungsanleitung
GEIGER
GEIGER GEIGER-SOLIDline Series Bedienungsanleitung
GEIGER
GEIGER GEIGER-Solid Line Bedienungsanleitung
GEIGER
GEIGER SOLIDline GU4506 Bedienungsanleitung
GEIGER
GEIGER GJ56E11 Series Bedienungsanleitung
GEIGER
GEIGER GEIGER-MODULARline Bedienungsanleitung
GEIGER
GEIGER SOLIDline GU45 Series Bedienungsanleitung
GEIGER
GEIGER GEIGER-SOLIDline Series Bedienungsanleitung
GEIGER
GEIGER SOLIDline Bedienungsanleitung
GEIGER
GEIGER PRO.TECline Spindle GB45 Series Bedienungsanleitung
GEIGER
GEIGER GB45SS Series Bedienungsanleitung
GEIGER
GEIGER INline GSI56 e5 Series Bedienungsanleitung
GEIGER
GEIGER GR4510 Bedienungsanleitung
GEIGER
GEIGER PRO.TECline GB45 M01 Series Bedienungsanleitung
GEIGER
GEIGER SOLIDline GU4510 Bedienungsanleitung
GEIGER
GEIGER SOLIDline GJ56 Series Betriebsanleitung
