Geko Aegis 100 Bedienungsanleitung
Aegis 100 Body Cam
User Manual
DISCLAIMER
Notes on Installation
1. Do not touch the lens with your fingers. Finger grease
may be left on the lens and will result in unclear videos or
pictures. Clean the lens on a regular basis.
2. Use the products of the attached power charger only,
please do not use a different brand of power chargers, in
order to avoid burning the equipment or the battery to
explode.
Introduction
Thank you all for purchasing the Aegis 100 body cam.
Before using this product, please read this manual
carefully and save it for future reference.
This manual is used as a guide. The photos, graphics, etc.
provided in the manual are for explanation and
description purposes only, there may be differences with
the specific products. Please refer to the actual product.
Subject to change without notice.
We have tried our best to ensure that this manual is
correct and complete. However, we are not responsible
for any errors or omissions. The manufacturer reserves
the right to directly change technical specifications or
spare parts without prior notice.
Precautions for Safe Usage
• Keep away from fire.
• The battery must not be exposed to harsh environments
such as sunlight, fire or similar heating.
• Do not replace the battery by yourself. Improper
replacement will cause explosion hazard. Please hand it
over to the dealer.
• When the battery has reached the end of its useful life,
please do not throw the battery into general household
garbage. Please dispose of the used battery in accordance
with local regulations.
• Do not disassemble, squeeze, or puncture the battery;
do not short-circuit the external contacts of the battery,
and do not put the battery in water or fire.
• Electromagnetic waves of certain frequencies may affect
the image quality.
• Please keep the front mirror of the lens clean to avoid
affecting the performance of taking pictures or videos.
• Avoid placing the LCD screen and the recorder lens
directly in direct sunlight.
• Do not use the device in excessive humidity or an
extremely hot environment. Avoid using the device near
strong interference sources and shielding devices.
• If the recorder emits smoke, smells, or makes noise,
please turn off the power immediately and unplug the
power cord, and contact the dealer in time. (Please do not
disassemble or modify the recorder in any way without
authorization. We do not assume any responsibility for
problems caused by unauthorized modification or
maintenance)
• If the product is not used for a long time, please fully
charge it in advance before using it again.
• Before you start using this product, please make a trial
video to master the use.
• When using this product, it should be fully charged and
then cut off. Do not charge it during work to prevent
damage to the internal parts of the device due to
improper use. (When charging, use the matched charging
device to charge this product to prevent component
damage caused by device mismatch)
• Please keep your username and password in a safe
place.
• To avoid the loss of device content, please back up the
data in time, and we will not be responsible for any data
or content loss during the operation.
Before you start using this product, it is assumed that you
agree to the above statement.
CONTENTS
Page 1 - Camera Diagram
Page 2/3/4 - Camera Diagram explanation
Page 5- Screen functions
Page 6/7/8/9/10-Menu functions
Page 11/12/13-Important information
Page 14-Product box contents
Camera Diagram
1
CAMERA DIAGRAM EXPLANATION
1 - Right LED Light -
A. Flat GREEN when idle.
B. Flashing RED when recording a video.
C. Temporary flat RED when a picture is taken in idle
mode.
D. Flashing AMBER light when recording an audio
recording.
E. Flat GREEN when the USB lead is connected to a
computer.
2 - Left LED Light -
A. Flat WHITE when device is fully charged.
B. Flat BLUE when charging and when the USB lead is
connected to a computer.
3 –Sensor -
Detects low and high light levels, this is what triggers the
automatic IR night vision.
4 - Infrared Night Vision Lights -
Illuminates images in the dark, helping in low light areas
or during nighttime.
5 - White LED light -
Helps illuminate in low light areas, to capture footage in
the dark.
2
6 - Lens -
Capture Video and images. The lens is also what triggers
the motion detection.
7 - USB Port -
Connect the USB cable to your computer, from there you
can transfer your recorded video, audio files and pictures
to the computer. Reset Hole - is located next to the USB
port. This is used to reset the device.
8 - Picture Button -
A. In idle mode, press to take a picture.
B. While recording a video, press to take a picture.
9 - Audio Record Button -
A. In idle mode, press to start an audio recording.
B. When recording a video, press to mute/unmute the
microphone.
C. In idle mode, hold for 2 seconds to switch between
720p and 1080p video resolutions.
10 - 2 Inch LCD Screen -
11 - Left Button -
A. In idle mode, press to play the last recorded video,
audio or photo.
B. In playback mode, press to rewind the video.
C. In menu mode, press to scroll up.
D. In playback mode, hold to zoom out the picture.
3
Inhaltsverzeichnis
Sprachen:
Andere Geko Digitalkamera Handbücher
