The people who are in charge of assembly should have the required qualifications for this type of work.
Before starting the installation, make sure that the disconnect the line from the lamps. RGB lights must
be connected to a single source of suitable capacity. The lamp should be operated only under water
and fixed to the vertical wall of the pool. The lamp must not be operated if it is not under water.
3. INSTALLATION - USE
3.1. Safety Warnings
• The people who are in charge of assembly should have the required qualifications for this type of work.
• Avoid making contact with the electric voltage.
• Comply with the current standards regarding accident prevention.
In this regard, the IEC 364-7-702 standards must be observed:
WIRING IN BUILDINGS. SPECIAL WIRING. SWIMMING POOLS.
• Any operation related to the maintenance or replacement of parts should be performed with the light’s electricity
disconnected from the main power.
• Any electrical material should not be touched with wet hands and feet.
3.2. Mounting
3
3.2.1. Installation to the Concrete Pool
As shown in the adjacent picture (method-1), it can be directly attached to the pool wall with only 2 fixing plugs and 2
screws using the mounting holes on the rim.
If the cross is used (method-2):
• As seen in the adjacent picture, the cross
is fixed to the pool with 6 screws.
• The cable outlet must be centered in the
space in the middle of the cross.
• Light is fixed to the cross with two screws
3.2.1a. Inox Framed Light Installation to Concrete Pool
• As seen in the adjacent picture,
the cross is fixed to the pool wall with 2 fixing plugs
and 2 screws.
• The frame is attached to the channel inside
the rim, matching the pin on the cross.
• The frame is fixed to the cross with
the screw on the upper part.
3.2.1b. Inox Click Framed Light Installation to Concrete Pool
Inox click model SlimLED Lights have a very easy installation.
• As seen in the adjacent picture, the cross
is fixed to the pool wall with 3 fixing plugs and 3 screws.
• The assembly is completed by placing the frame on
the cross and pressing firmly.
Method-2Method-1
