Gemini GMK600P Bedienungsanleitung
在使用本產品前，請仔細閱讀本說明書並保存好。
Before using your product for first tim e, please read this instruction m anual carefully.
Mini Mul-funcon
Healthy Kele
四季智能迷你養生壺
Model NO. /型號：GMK600P
600W
1
Safety Precautions
1. The kettle complies with electric appliances’ technical certification rules and
the related safety laws and regulations.
2. Before use, inspect and make sure the local voltage( AC 220-240V~,50/60Hz)
match with the rated voltage on the nameplate.
3. For personal safety, please use a correctly grounded socket.
4. When in use, put the kettle on a stable and secure platform and keep it out of
reach of children.
5. Inspect the plug and the power cable comprehensively and carefully and, if
damaged, have them repaired or replaced by professionals.
6. Do not use the kettle on (or close to) carpet, plastics or any other material not
resistant to heat. Do not put any object likely to be affected by steam on the
kettle.
7. Beware of burn by the plentiful steam coming out of the spout.
8. Keep the base surface clean. After use for some time, remove the dirt or water
on the base surface.
9. For safety, do not immerse the kettle body into water or allow any liquid to
flow into its interior or base.
10. If the power cable is damaged, have it replaced by a professional of the
repair department of the manufacturer.
11. Do not use the kettle when there is no water in it, otherwise its life will be
shortened.
12. When the kettle is boiling water, make sure it is watched and keep children
away from it, particularly, make sure no child plays with the power cable.
13. To avoid electric shocks due to damage of the kettle, do not immerse the
kettle or its power cable, plug or base into water or any other liquid.
14. If the kettle body, the base or any other part is damaged, stop using the
kettle immediately and contact our after-sales service department.
15.When add water into the kettle, make sure the water in it is not higher than
the maximum water level sign, i.e. the 600ml mark, otherwise boiling water will
overflow.
2
16. When in use, do not touch the kettle with hands, otherwise you might be
scalded.
17. The kettle body and the base should be products produced by us only.
18. When in use, make sure the power socket has good contact and do not use
any extension cable.
19. To avoid dangers such as short circuit or electric shocks, do not pull the
power cable forcedly but hold the plug when the power cable is unplugged.
20. To avoid dangers such as short circuit or electric shocks, do not plug or
unplug the power cable with wet hands.
21. To avoid dangers such as electric leakage or fires, do not dismantle, repair or
modified the kettle by yourself but have the work done by professionals.
22. Do not remove the top cover when the water in the kettle is boiling.
23. Use the kettle on the base delivered with the kettle only.
24. Use the kettle at home only. Do not use it outdoors.
25. Do not use the kettle for other non-household purposes.
26. The kettle can be used by children of 8 or above. When people with disability,
impaired sensory intelligence or inadequate experience or knowledge use the
product, they should be watched or guided in terms of safe use of the kettle and
know the related dangers.
27. Adults should tell children not to play with the kettle.
28.Inspect the power cable at regular intervals. If it is damaged, it must be
replaced by our after-sales service department or qualified electrician.
3
Product Description
Remarks: The picture is for reference only.
Note: The default operation time of each function program is to start calculation
after the water is boiled.
Program parameters for each functions
Function Default
Operation
Time
Heating
temperature
Default Auto-
keep warm
temperature
Adjustable
operation
Time
Temperature range
for “Keep Warm”
function
Flower Tea 20 min. 100℃60℃15-60 min. 30 - 90℃
Ginseng Tea 10 min. 100℃60℃5-30 min. 30 - 90℃
Healthy Soup 30 min. 100℃60℃15-60 min. 30 - 90℃
Brew Tea 7 min. 100℃60℃5-60 min. 30 - 90℃
Boil Water / 100℃60℃/30 - 90℃
Keep Warm 24 hours 60℃60℃/30 - 90℃
4
Notes:
1.When making a foamy tea, please lift the top cover.
2.Different teas may have different weights, so it is difficult to set a single
standard for the water level in tea making. In principle, total volume of the tea
and the water should not be higher than the maximum mark, i.e. 600 ml.
Particularly, there is white foam when making ginseng tea, so do not add water
to 600ml mark but to 400ml only.
3. The kettle is designed with dry boil protection. This function will not apply
if the water less than 200 ml. When kettle is without water, the kettle will stop
operation and start the dry boil protect function.
4. If the soup base or tea is pasty or sugar contained, there might be an
overcooking sign at bottom of the kettle after heating. Therefore, do not leave
the kettle when making tea or cooking soup. If overcooking is found, stop the
kettle and clean the overcooked soup base or tea immediately after the kettle
has cooled down.
5. If any seasoning (such as sugar or salt) needs to be added into any soup, add it
into the container bowl with the soup poured into it after the program is finished.
Do not add it into the kettle directly for heating to extend the life of this product.
6. Due to the difference water quality, the scale at the bottom of the kettle is a
normal phenomenon.
7. There is 24 hours auto-Keep Warm function at default keep warm temperature
60℃after each program completed. The display temperature fluctuates with the
change of water temperature and environment at (±3℃).
8. After brew tea, there will be tea stains at the bottom of the kettle. It should be
cleaned in time. Otherwise, it will be hard to clean after the stains accumulate
for a long time and shorten the product service life.
5
Instructions for use
I. Boil Water
Add water into the kettle and make sure the water in it is between the lowest
mark(200ml) and the highest mark(600ml) (for purpose of no overflow via the
spout during water boiling). Fit the top cover and connect the kettle body and
the base. (During water boiling, the tea strainer and the tea strainer holder are
not expected to be in the kettle.)
6
After the plug is inserted into the power socket, “OFF” will appear on the display
screen and there will be a “BEEP”, which suggests that the product is standby.
Press “Function/Cancel” gently with a hand and choose the “Boil water”program.
The program indicator will then flicker. Five seconds later, the kettle will begin to
work automatically and the “Boil water”program indicator will remain lit. After
the water has boiled, the kettle will sound a “Beep” then keep the water in
warm.
7
The “Keep Warm” program indicator will remain lit. The default duration of
keeping the water warm is 24 hours following end of the previous program and
the default warm water temperature is 60 ℃.Or you can press
“Timer/Temperature” gently to adjust the temperature between 30℃and 90℃:
Short press the button to increase by 1℃each press, or long press it to increase
by 5℃each press. The adjustment can be cyclic.
II. Brew Tea
Add water into the kettle and
make sure the clear water in it is
between the lowest mark(200ml)
and the highest mark(600ml).
Put both the tea strainer
and the tea strainer holder
into the kettle body.
Use the tea leave about 5-10g and
distribute on the tea strainer
evenly. (The data above are for
reference only.)
8
Press “Function/Cancel” gently and choose the “Brew Tea” program. The
program indicator will flicker. The default time is 7 minutes and the default
operation temperature is 100 ℃and cannot be adjusted. Press
“Timer/Temperature” gently to adjust the operation time of heating (5-60
minutes): short press the button to increase by 5 minutes each press, or long
press it to increase by 10 minutes each press. The adjustment can be cyclic.
Insert the plug into the
power socket and choose
“Brew Tea” to start the
kettle.
Fit the top cover firmly
and put the kettle body
onto the power base.
9
Five seconds later, the kettle will begin to work automatically and the “Brew Tea”
program indicator will remain lit. Upon end of the program, the kettle will sound
a “Beep” and keep the tea in warm for 24 hours automatically at default auto
keep warm temperature 60 ℃and it can be adjusted between 30 ℃-90 ℃
according your needs .
Ⅲ、Flower Tea
After the power is turned on, the display shows the OFF and enters standby
mode. Press “Function/Cancel” gently and choose the “Flower Tea” program. The
program indicator will flicker. Five seconds later, the kettle will begin to work
automatically and the default operation time of the program will appear on the
display screen. Press “Timer/Temperature” gently to adjust the duration (15-60
minutes): short press the button to increase by 5 minutes each press, or long
press it to increase by 10 minutes each press. The adjustment can be cyclic. Upon
end of the program, the kettle will sound a “Beep” and keep the tea in warm of
24 hours at default auto keep warm temperature 60℃and it can be adjusted
between 30℃-90℃according your needs .
Reminder: The minimum water level is 200ml and the maximum water level is
600ml. (The data above are for reference only.)
Inhaltsverzeichnis
Andere Gemini Wasserkocher Handbücher
