Gemini UHF-6200 Bedienungsanleitung

USER'S MANUAL

UHF PLL MULTI CHANNELS

WIRELESS MICROPHONE SYSTEM

PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION

UHF-6200

FCC ID:2AE6GUHF-6200

1. Microcomputer controlled PLL synthesized oscillation circuit.

2. UHF high band with multi selectable frequencies.

3. Automatic transmitter setup.

4. Adopt high sensitivity and wide frequency response dynamic capsule

to reproduce original sound.

5. Advanced compression circuit to avoid noise.

6. LCD display for easy operation.

7. Operating range is about 60M.

-1-

Thank you for choosing our UHF PLL multi channels wireless

microphone system. Your new system is rugged, reliable, easy to set up

and operate, and produces outstanding audio clarity. Whether you're a

vocalist, guitarist or instrumentalist, this wireless system will show you

how easy wireless can be, and how good wireless can sound. This user

guide included with your system will tell you all you need to know to get

your system working right away.

INTRODUCTION

FEATURES

-2-

RECEIVER PARTS DESCRIPTION

Dual Channels

788 7

Front

Rear

9 10 11 12 9

123456345

2. Infrared (IR) port: Broadcasts IR signal to transmitter to synchronize

frequencies.

3. Menu switch: Press to scroll through menu options.

4. Select switch: Press to select the currently displayed menu option.

5. Sync Button: Press to initiate IR connection between receiver and

transmitter.

6. LCD display: display group, channel no, RF and AF level.

7. Volume control: Turn to adjust volume.

8. Antenna connector: To install supplied antenna here.

9. Individual Balanced XLR output

10. Mixed 1 / 4 " output jack

11. MIC/LINE switch

12. DC input jack

On/Off switch: Turn on/off the receiver.

-3-

1. Interchangeable microphone head

2. Power / Infrared(IR) /Mute indicator: Green-ready; Orange-mute on;

Flashing orange-IR transmission in process

3. LCD screen: display group, channel number and battery power.

4. On-off / mute switch: Press and hold 1~2 seconds to turn microphone

on or off. Press shortly to mute or unmute.

5. Select switch: To set up transmitter channel manually.

6. Battery cover/compartment

7. IR port: Receives infrared beam from receiver to synchronize

frequencies.

HANDHELD MICROPHONE PARTS DESCRIPTION

1. Antenna

2. Power switch

3. MIC Input Jack

4. LCD screen: display channel number and

battery power.

5. Low Battery/IR indicator

Red: low battery;

Flashing red-IR transmission in process

6. Power indicator: light green

7. Select switch: to set up transmitter channel

manually.

8. IR port: Receives infrared beam from

receiver to synchronize frequencies.

9. Battery compartment

BODY PACK TRANSMITTER PARTS DESCRIPTION

RECEIVER PROGRAMMING

-4-

SYSTEM SETUP

Note: Transmitting devices such as cellular phones and two-way radios

may interfere with wireless audio transmissions. Keep your transmitters

and receivers away from these and other potential sources of

interference.

Automatic Transmitter Setup

1. Turn on the first transmitter.

2. Open transmitter battery cover to display the infrared (IR) port.

3. Point transmitter IR port to receiver IR sensor.

4. Press “SYNC” button on receiver. CH-A

antenna signal will display in receiver screen.

Now channel A is ready.

5. Close the transmitter battery cover.

Be sure that only one transmitter IR port is exposed when

synchronizing a system.

1. Turn on receiver. LCD will light.

2. Channel A set up

3. Channel B set up

Follow the same steps as described in step 2, press CH-B buttons

to set up Channel B.

Channel Selection

1. Press CH-A “MENU” button to move cursor to

“GROUP SELECT”.

2. Press CH-A “SELECT” button to increase the

group number by one.

3. When the correct group is displayed, either wait

five seconds for the screen to time out, or press

CH-A “SYNC” button.

1. Press CH-A “MENU” button again to move cursor

to “CHANNEL SELECT” .

2. Then press CH-A “SELECT” button to increases

the channel number by one.

3.When the correct channel is displayed, either wait

five seconds for the screen to time out, or press

CH-A “SYNC” button.

Group Selection

MANUAL SETUP OF TRANSMITTER FREQUENCY

You can set up transmitter frequency manually also.

1. Press and hold the “SELECT” button until

GROUP and CHANNEL displays begin to

alternate.

2. To change the group setting, release the

“SELECT” button while GROUP is displayed.

While GROUP is flashing, press “SELECT”

button to increase the group number by one.

3. To change the channel setting, release the

“SELECT” button while CHANNEL is displayed.

While CHANNEL is flashing, press “SELECT”

button to increase the channel number by one.

RECEIVER

Frequency Range: USA : 682~694.75MHz

Frequency Stability：10ppm

Sensitivity: 13dBuV

Adjacent channel rejection：75dB

Image rejection: 95dB

Audio Output：200MV

Output Impedance: XLR connector: 200 ; 1 / 4 inch connector: 1k

S/N ratio: 100dB

0.1%

Frequency response: 50Hz-15KHz

:100m( in line and sight area)

Power supply: DC12V/500mA

TRANSMITTER

Frequency Range: USA : 682~694.75MHz

Frequency Stability: 10ppm

Transmitting power: 10mW

Spurious emission: >65dB

Modulation: FM

Max modulation: 75K

Power supply: 3V (2 AA batteries)

Current consumption: 120mA

Total Harmonic Distortion: <

Operating Range

SPECIFICATIONS

-5-

NOTE:This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.



Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwo

conditions:

(1)thisdevicemaynotcauseharmfulinterference,and

(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause

undesiredoperation.



Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsiblefor

compliancecouldvoidtheuser'sauthoritytooperatetheequipment.

Inhaltsverzeichnis

Andere Gemini Mikrofonsystem Handbücher

Gemini

Gemini Professional UHF Wireless System UX-16 H Betriebsanleitung

Gemini

Gemini GEMINI VHF-1001HL Bedienungsanleitung

Gemini

Gemini UF-1064, UF-1264, UF-2064, UF-8264 Bedienungsanleitung

Gemini

Gemini VHF-1000M Bedienungsanleitung

Gemini

Gemini UHF-116HL Bedienungsanleitung

Gemini

Gemini UF-1264 Bedienungsanleitung

Gemini

Gemini GMU Series Bedienungsanleitung

Gemini

Gemini UHF UX-1600 Bedienungsanleitung

Gemini

Gemini UF-1064, UF-1264, UF-2064, UF-8264 Bedienungsanleitung

Gemini

Gemini VHF-01 series Bedienungsanleitung

Gemini

Gemini UHF-5000 Series Bedienungsanleitung

Gemini

Gemini VHF-02 series Bedienungsanleitung

Gemini

Gemini UHF-116HL Bedienungsanleitung

Gemini

Gemini UHF Sixteen UX-160 Bedienungsanleitung

Gemini

Gemini VH Series Bedienungsanleitung

Gemini

Gemini UHF-4000 series Bedienungsanleitung

Gemini

Gemini UX-16 M Bedienungsanleitung

Gemini

Gemini UHF-04 Bedienungsanleitung

Gemini

Gemini UZ-1128 Bedienungsanleitung

Beliebte Mikrofonsystem Handbücher anderer Marken

Paso

Paso R824 Bedienungsanleitung

Naxa

Naxa NAM-982 Bedienungsanleitung

Motorola

Motorola PMNN4461 Bedienungsanleitung

Xvive

Xvive U3 Bedienungsanleitung

Tekon

Tekon DUOS Bedienungsanleitung

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Bedienungsanleitung

Devine

Devine WMD-IE Bedienungsanleitung

LG LF-D7150 Bedienungsanleitung

GE S768DAV Bedienungsanleitung

LD U305 HBH 2 Bedienungsanleitung

Chainway

Chainway URA8 Bedienungsanleitung

ORATOR

ORATOR D860TD Bedienungsanleitung

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Bedienungsanleitung

Alpha Technologies

Alpha Technologies RBMS Bedienungsanleitung

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Bedienungsanleitung

Shure

Shure UA844 Bedienungsanleitung

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Bedienungsanleitung

Pyle

Pyle PDWM5000 Bedienungsanleitung