Generac Power Systems Generator Bedienungsanleitung

Andere Handbücher für Generator

2

Inhaltsverzeichnis

Andere Generac Power Systems Wechselrichter Handbücher

Generac Power Systems

Generac Power Systems Guardian 04758-0 Montageanleitung

Generac Power Systems

Generac Power Systems Guardian 004721-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 004701-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems Guardian 5410 Betriebsanleitung

Generac Power Systems

Generac Power Systems 004812-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 004090-2, 004091-2, 004092-2, 004093-2, 004094-2, 004095-2, 004096-2, 004097-2, 004474-0, 004124-1, 004125-1, 004126-1... Bedienungsanleitung

Generac Power Systems

Generac Power Systems 006180-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 941-2 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GUARDIAN 04136-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems Guardian 04389-1 Montageanleitung

Generac Power Systems

Generac Power Systems Guardian 004188-1 Bedienungsanleitung

Generac Power Systems

Generac Power Systems Guardian 004188-1 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 005261-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems MGG155 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GP1200I Bedienungsanleitung

Generac Power Systems

Generac Power Systems 00941-3 Service-Handbuch

Generac Power Systems

Generac Power Systems Guardian 04758-2 Montageanleitung

Generac Power Systems

Generac Power Systems PWRcell X7600 Series Bedienungsanleitung

Generac Power Systems

Generac Power Systems Guardian 004373-1 Bedienungsanleitung

Generac Power Systems

Generac Power Systems QUIET TEST 5418 Bedienungsanleitung

Generac Power Systems

Generac Power Systems PWRcell XVT076A03 Montageanleitung

Generac Power Systems

Generac Power Systems QT025A Bedienungsanleitung

Generac Power Systems

Generac Power Systems 04673-2 Montageanleitung

Generac Power Systems

Generac Power Systems 004702-0, 004703-0, 004704-0, Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE

GE GEP Bedienungsanleitung

Astrel Group

Astrel Group Power Reducer Kurzanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung

Protect Your

Investment

500 James St Unit 4 Lakewood, NJ 08701 732·367·8324

www.fortechgenerators.com

AUTHORIZED SALES AND SERVICE DEALER

AUTOMATIC STANDBY & PORTABLE GENERATORS

● 24/7 Emergency Service

● Priority service guaranteed

● Quick response assured

● Contact us anytime, even outside

● normal business hours

● 20% discount on labor for any

● generator repairs, outside warranty

● Experienced, factory trained

● technicians on staff

Congratulations

on your purchase of a Generac automatic standby generator – the

most dependable and advanced unit in the industry today. Sched-

uled maintenance is necessary to ensure your generator will run

properly at the time of need. Generac requires that service and

repairs are performed by a factory trained and authorized service

technician.

For-Tech Electric LLC of Lakewood, NJ, was established in 2009 to

service the surrounding area and provide residents with standby

power solutions. Our staff of knowledgeable, dedicated profes-

sionals take pride in providing outstanding, personalized service to

our customers and our community. The company is committed to

honesty, quality and professionalism. From its inception, For-Tech

Electric has been a Generac Authorized Dealer. Our courteous team

of technicians are factory trained by Generac Power Systems and

are certiﬁed in service and installations. We are also authorized to

perform warranty repairs.

For-Tech Electric is up-to-date on the latest product advances re-

garding the maintenance and repair of Generac’s standby genera-

tors. Only Generac original factory parts are used in our ﬁrst rate

service.

For-Tech Electric offers priority service and quick response time

guaranteed. We can be contacted anytime, even outside normal

business hours.

● 24/7 Emergency Service

● Priority service guaranteed

● Quick response assured

● Contact us anytime, even outside

● normal business hours

● 20% discount on labor for any

● generator repairs, outside warranty

● Experienced, factory trained

● technicians on staff

Congratulations

on your purchase of a Generac automatic standby generator – the

most dependable and advanced unit in the industry today. Sched-

uled maintenance is necessary to ensure your generator will run

properly at the time of need. Generac requires that service and

repairs are performed by a factory trained and authorized service

technician.

For-Tech Electric LLC of Lakewood, NJ, was established in 2009 to

service the surrounding area and provide residents with standby

power solutions. Our staff of knowledgeable, dedicated profes-

sionals take pride in providing outstanding, personalized service to

our customers and our community. The company is committed to

honesty, quality and professionalism. From its inception, For-Tech

Electric has been a Generac Authorized Dealer. Our courteous team

of technicians are factory trained by Generac Power Systems and

are certiﬁed in service and installations. We are also authorized to

perform warranty repairs.

For-Tech Electric is up-to-date on the latest product advances re-

garding the maintenance and repair of Generac’s standby genera-

tors. Only Generac original factory parts are used in our ﬁrst rate

service.

For-Tech Electric offers priority service and quick response time

guaranteed. We can be contacted anytime, even outside normal

business hours.

3 Part Operation Test

MANUAL TEST Generator is started manually and output is tested

and recorded.

SIMULATED POWER OUTAGE WITH AUTO TRANSFER UNDER LOAD Power

input to generator is interrupted. The generator will start, run, and transfer load.

Generator output voltage, frequency, and amps are tested and recorded. Power

input is then restored to the generator. Auto transfer back to utility and genera-

tor shut down are monitored.

EXERCISE TEST Generator exercise is set to current time. Generator will start

and run exercise. Proper engine speed will be noted and recorded. Exercise

time will then be reset to original schedule (digital displays only).

Tune Up

Air Cooled Generators up to 20 kW

OIL CHANGE – Generac 5w-30 synthetic oil (or comparable)

OIL FILTER CHANGE – Generac original part

AIR FILTER CHANGE – Generac original part

SPARK PLUGS – Inspect, clean, or replace

ENCLOSURE - Clean

Liquid Cooled Generators up to 48 kW

COOLANT - Top off

Air Cooled Generators up to 20 kW

AIR INTAKE - Check for particle buildup/blockage.

OIL - Verify proper level and purity.

FUEL LINES - Check for any corrosion and possible kinks.

ENCLOSURE - Inspect for rust and corrosion.

BATTERY - Check voltage and charge rate. Inspect terminals.

BASE - Level and stable.

ENGINE - Inspect for leaks, cracks, and loose ﬁttings.

INTERNAL PARTS - Check for rust and corrosion.

CONTROL PANEL - Check history for alarm and error codes.

TRANSFER SWITCH - Check for loose connections, blown fuses,

or any damage to the enclosure.

Liquid Cooled Generators up to 48 kW - 12 Point Inspection

COOLANT - Check for leaks and ensure proper level.

BELTS - Check for wear and cracks.

10 Point Inspection

3 Part Operation Test

MANUAL TEST Generator is started manually and output is tested

and recorded.

SIMULATED POWER OUTAGE WITH AUTO TRANSFER UNDER LOAD Power

input to generator is interrupted. The generator will start, run, and transfer load.

Generator output voltage, frequency, and amps are tested and recorded. Power

input is then restored to the generator. Auto transfer back to utility and genera-

tor shut down are monitored.

EXERCISE TEST Generator exercise is set to current time. Generator will start

and run exercise. Proper engine speed will be noted and recorded. Exercise

time will then be reset to original schedule (digital displays only).

Tune Up

Air Cooled Generators up to 20 kW

OIL CHANGE – Generac 5w-30 synthetic oil (or comparable)

OIL FILTER CHANGE – Generac original part

AIR FILTER CHANGE – Generac original part

SPARK PLUGS – Inspect, clean, or replace

ENCLOSURE - Clean

Liquid Cooled Generators up to 48 kW

COOLANT - Top off

Air Cooled Generators up to 20 kW

AIR INTAKE - Check for particle buildup/blockage.

OIL - Verify proper level and purity.

FUEL LINES - Check for any corrosion and possible kinks.

ENCLOSURE - Inspect for rust and corrosion.

BATTERY - Check voltage and charge rate. Inspect terminals.

BASE - Level and stable.

ENGINE - Inspect for leaks, cracks, and loose ﬁttings.

INTERNAL PARTS - Check for rust and corrosion.

CONTROL PANEL - Check history for alarm and error codes.

TRANSFER SWITCH - Check for loose connections, blown fuses,

or any damage to the enclosure.

Liquid Cooled Generators up to 48 kW - 12 Point Inspection

COOLANT - Check for leaks and ensure proper level.

BELTS - Check for wear and cracks.

10 Point Inspection

Service Options

1 Year Agreement

Air cooled generators up to 20 kW

Includes one annual visit in which we perform a 10 point inspection, 3 part

operational test, and annual tune up.

1 Year Agreement

Liquid cooled generators up to 48 kW

Includes one annual visit in which we perform a 12 point inspection, 3 part

operational test, and annual tune up.

3 Year Agreement

Air cooled generators up to 20 kW

Includes one annual visit in which we perform a 10 point inspection, 3 part

operational test, and annual tune up.

In addition, receive:

Annual tune up

Additional check up visit

Break-in oil change

3rd year battery replacement

3 Year Agreement

Liquid cooled generators up to 48 kW

Includes one annual visit in which we perform a 12 point inspection, 3 part

operational test, and annual tune up.

In addition, receive:

Annual tune up

Additional check up visit

Break-in oil change

3rd year battery replacement

3rd year coolant change

BUNDLE & SAVE!

Additional Services

1. Additional Check Up

10 Point Inspection

(12 Point Inspection for Liquid Cooled)

2. Break-In Oil Change

Units are shipped with a special lightweight

break-in oil. It is recommended that this oil is

changed after 10 hours of operation.

3. 3rd Year Battery Replacement

Done at time of annual tune up.

4. 3rd Year Coolant Change

Liquid cooled generators up to 48 kW

Done at time of annual tune up.

Service Options

1 Year Agreement

Air cooled generators up to 20 kW

Includes one annual visit in which we perform a 10 point inspection, 3 part

operational test, and annual tune up.

1 Year Agreement

Liquid cooled generators up to 48 kW

Includes one annual visit in which we perform a 12 point inspection, 3 part

operational test, and annual tune up.

3 Year Agreement

Air cooled generators up to 20 kW

Includes one annual visit in which we perform a 10 point inspection, 3 part

operational test, and annual tune up.

In addition, receive:

Annual tune up

Additional check up visit

Break-in oil change

3rd year battery replacement

3 Year Agreement

Liquid cooled generators up to 48 kW

Includes one annual visit in which we perform a 12 point inspection, 3 part

operational test, and annual tune up.

In addition, receive:

Annual tune up

Additional check up visit

Break-in oil change

3rd year battery replacement

3rd year coolant change

BUNDLE & SAVE!

Additional Services

1. Additional Check Up

10 Point Inspection

(12 Point Inspection for Liquid Cooled)

2. Break-In Oil Change

Units are shipped with a special lightweight

break-in oil. It is recommended that this oil is

changed after 10 hours of operation.

3. 3rd Year Battery Replacement

Done at time of annual tune up.

4. 3rd Year Coolant Change

Liquid cooled generators up to 48 kW

Done at time of annual tune up.

Protect Your

Investment

500 James St Unit 4 Lakewood, NJ 08701 732·367·8324

www.fortechgenerators.com

AUTHORIZED SALES AND SERVICE DEALER

AUTOMATIC STANDBY & PORTABLE GENERATORS