Generac Power Systems PWRcell X7600 Series Bedienungsanleitung

SAVE THIS MANUAL FOR FUTURE REFERENCE

WWW.GENERAC.COM

1-888-GENERAC

(1-888-436-3722)

Owner’s Manual

Generac PWRcell™ Inverter

009954

(000209b)

WARNING

Loss of life. This product is not intended to

be used in a critical life support application.

Failure to adhere to this warning could result

in death or serious injury.

https://register.generac.com/

1-888-GENERAC

(888-436-3722)

Para español, visita: http://www.generac.com/service-support/product-support-lookup

Pour le français, visiter: http://www.generac.com/service-support/product-support-lookup

ii Owner’s Manual for Generac PWRcell Inverter

Use this page to record important information about your Generac Product

Record the information found on your unit data label on this page. See Serial Number Locations.

When contacting an Independent Authorized Service Dealer (IASD) or Generac Customer Service, always supply the

complete model number and serial number of the unit.

Table 1: Generac PWRcell Inverter Important Information

Unit Model Number

Unit Serial Number

Date Purchased

Commissioning Date

(000393a)

WARNING

CANCER AND REPRODUCTIVE HARM

www.P65Warnings.ca.gov.

Owner’s Manual for Generac PWRcell Inverter iii

Section 1: Introduction and Safety

Introduction ..........................................................1

Read This Manual Thoroughly ....................................1

Safety Rules .........................................................1

How to Obtain Service .................................................1

General Hazards ..................................................2

Electrical Hazards ................................................3

Safety Shutdown ..................................................3

Section 2: General Information

Specifications ......................................................5

Ratings ..................................................................5

Serial Number Location ......................................6

Unit Dimensions .................................................6

About Generac PWRcell Inverters .....................6

Component Locations .........................................7

Inverter Control Panel .........................................7

LED Indicators .....................................................7

REbus Status LED ......................................................7

Inverter LED ................................................................7

Safety Shutdown LED .................................................7

Internet LED ................................................................7

Operational Modes Overview .............................8

Grid Tie .......................................................................8

Clean Backup ..............................................................8

Priority Backup ............................................................9

Self Supply ..................................................................9

Self Supply Setpoints ................................................10

Section 3: Operation

Operation and User Interface ....................................11

Home Screen ......................................................11

Selecting Operational Modes ........................... 11

Device Pages .....................................................12

Enabling and Disabling Devices ................................12

Mod. Settings Menu ........................................... 13

Ethernet Configuration .....................................14

Ethernet Setup ..........................................................14

Serial Number and Registration .......................14

Other External Communications

Generac Beacon ................................................14

Section 4: Maintenance

Service ................................................................15

Maintenance .......................................................15

Recovery From an Error State .......................... 15

iv Owner’s Manual for Generac PWRcell Inverter

This page intentionally left blank.

Introduction and Safety

Owner’s Manual for Generac PWRCell Inverter 1

Section 1: Introduction and Safety

Introduction

Thank you for purchasing a Generac PWRcell™ Inverter.

The Generac PWRcell Inverter is a storage-ready

inverter that connects to the Generac PV Link™ and

Generac PWRcell Batteries to form the Generac

PWRcell system.

This owner’s manual provides instructions for

programming, configuring, registering and

commissioning the Generac PWRcell Inverter. See the

Generac PWRcell Inverter Installation Manual for

installation instructions.

The information in this manual is accurate based on

products produced at the time of publication. The manu-

facturer reserves the right to make technical updates,

corrections, and product revisions at any time without

notice.

Read This Manual Thoroughly

If any section of this manual is not understood, contact

the nearest Independent Authorized Service Dealer

(IASD) or Generac Customer Service at 1-888-436-3722

(1-888-GENERAC), or visit www.generac.com for assis-

tance. The owner is responsible for correct maintenance

and safe use of the unit.

This manual must be used in conjunction with all other

supporting product documentation supplied with the

product.

SAVE THESE INSTRUCTIONS for future reference. This

manual contains important instructions that must be fol-

lowed during placement, operation, and maintenance of

the unit and its components. Always supply this manual

to any individual that will use this unit, and instruct them

on how to correctly start, operate, and stop the unit in

case of emergency.

Safety Rules

The manufacturer cannot anticipate every possible cir-

cumstance that might involve a hazard. The alerts in this

manual, and on tags and decals affixed to the unit, are

not all inclusive. If using a procedure, work method, or

operating technique that the manufacturer does not spe-

cifically recommend, verify that it is safe for others and

does not render the equipment unsafe.

Throughout this publication, and on tags and decals

affixed to the unit, DANGER, WARNING, CAUTION, and

NOTE blocks are used to alert personnel to special

instructions about a particular operation that may be

hazardous if performed incorrectly or carelessly. Observe

them carefully. Alert definitions are as follows:

(000001)

DANGER

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

(000002)

WARNING

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

(000003)

CAUTION

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

NOTE: Notes contain additional information important to

a procedure and will be found within the regular text of

this manual.

These safety alerts cannot eliminate the hazards that

they indicate. Common sense and strict compliance with

the special instructions while performing the action or

service are essential to preventing accidents.

How to Obtain Service

For assistance, contact the nearest Independent Autho-

rized Service Dealer (IASD) or Generac Customer Ser-

vice at 1-888-436-3722 (1-888-GENERAC), or visit

www.generac.com.

When contacting an IASD or Generac Customer Service,

always supply the complete model and serial number of

the unit as given on its data decal located on the unit.

Record the model and serial numbers in the spaces pro-

vided on the front cover of this manual.

(000100a)

WARNING

Consult Manual. Read and understand manual

completely before using product. Failure to

completely understand manual and product

could result in death or serious injury.

Introduction and Safety

2 Owner’s Manual for Generac PWRCell Inverter

General Hazards

Automatic start-up. Disconnect utility power and

render unit inoperable before working on unit.

Failure to do so will result in death or serious injury.

(000191)

DANGER

WARNING

Risk of injury. Do not operate or service this machine

if not fully alert. Fatigue can impair the ability to

service this equipment and could result in death or

serious injury. (000215)

(000209b)

WARNING

Loss of life. This product is not intended to

be used in a critical life support application.

Failure to adhere to this warning could result

in death or serious injury.

(000598)

WARNING

Equipment damage. Connect only to REbus-compatible

devices to the DC bus. Never connect to any other DC

power source. Connecting to other DC power sources

could result in equipment damage.

(000155a)

WARNING

Electric shock. Only a trained and licensed electrician

should perform wiring and connections to unit. Failure

to follow proper installation requirements could result in

death, serious injury, and equipment or property damage.

(000182a)

WARNING

Equipment damage. Only qualified service personnel may

install, operate, and maintain this equipment. Failure to

follow proper installation requirements could result in death,

serious injury, and equipment or property damage.

•Connecting Generac PWRcell to the electric utility

grid must only be done after receiving prior

approval from the utility company.

•Only competent, qualified personnel should install,

operate, and service this equipment. Strictly com-

ply to local, state, and national electrical and build-

ing codes. When using this equipment, comply with

regulations established by the National Electrical

Code (NEC), CSA Standard; the Occupational

Safety and Health Administration (OSHA), or the

local agency for workplace health and safety.

•Protection against lightning surges in accordance

with local electric codes is the responsibility of the

installer.

•If working on this equipment while standing on

metal or concrete, place insulative mats over a dry

wood platform. Work on this equipment only while

standing on such insulative mats.

•Never work on this equipment while physically or

mentally fatigued.

•Any voltage measurements should be performed

with a meter that meets UL3111 safety standards,

and meets or exceeds overvoltage class CAT III.

Introduction and Safety

Owner’s Manual for Generac PWRCell Inverter 3

Electrical Hazards

(000104)

DANGER

Electrocution. Water contact with a power

source, if not avoided, will result in death

or serious injury.

(000604)

DANGER

Electrocution. PWRcell Battery front cover should be

removed by a qualified technician only. Removing

the front cover could result in death, serious injury,

equipment or property damage.

(000145)

DANGER

Electrocution. In the event of electrical accident,

immediately shut power OFF. Use non-conductive

implements to free victim from live conductor. Apply

first aid and get medical help. Failure to do so will

result in death or serious injury.

(000599)

Electrocution. Turn battery disconnect OFF and

de-energize REbus before touching terminals.

Failure to do so will result in death, serious injury,

equipment and property damage.

DANGER

(000152)

DANGER

Electrocution. Verify electrical system is

properly grounded before applying power.

Failure to do so will result in death or serious

injury.

(000188)

DANGER

Electrocution. Do not wear jewelry while

working on this equipment. Doing so will

result in death or serious injury.

(000187)

WARNING

Electrocution. Potentially lethal voltages are generated

by this equipment. Render the equipment safe before

attempting repairs or maintenance. Failure to do so

could result in death or serious injury.

Safety Shutdown

(000600)

DANGER

Electrocution. Initiate a system-wide safety shutdown

and turn PWRcell Disconnect Switch OFF on all

connected batteries before performing service. Failure

to do so will result in death, serious injury, equipment

and property damage.

NOTE: A loss of grid power will not de-energize REbus

in a system configured to island or provide backup power.

See Figure 1-1. Shutdown button (A) on the Generac

PWRcell Inverter control panel activates Safety

Shutdown. Safety Shutdown signals connected devices

to shutdown and limit output voltage to a safe level. An

external shutdown button may also be installed, given

appropriate labeling. See the Generac PWRcell Inverter

Installation Manual for more information.

To enter Safety Shutdown, press and hold Shutdown (A).

Safety shutdown LED (B) will illuminate and LCD screen

REbus Inverter

Internet

Shutdown

(hold)

009918

Figure 1-1. Safety Shutdown Button (Located on

Inverter Control Panel)

Upon entering Safety Shutdown, a shutdown signal will

be transmitted to all devices connected to REbus. In

Safety Shutdown:

•Generac PWRcell Inverter will disconnect from the

grid.

•Generac PWRcell Inverter will stop sourcing power

to REbus, and immediately disable all sources on

REbus by sending a global shutdown signal.

•All Generac PV Link Optimizers will disconnect

their output.

•Safety Shutdown LED (B) will be illuminated to

show that the inverter has entered safety shut-

down. REbus DC bus voltage will be displayed on

the inverter screen.

Introduction and Safety

4 Owner’s Manual for Generac PWRCell Inverter

This page intentionally left blank.

Owner’s Manual for Generac PWRcell Inverter 5

General Information

Section 2: General Information

Specifications

Description Units X7600 Series X11400 Series

Max. cont. AC power @ 50ºC kW 7.6 11.4

Grid Voltage VAC 120/240 (1-ph) 120/208 (3-ph)

Max cont. REbus current (peak) A 20 30

Max cont. grid output current A 32

AC terminals wire size AWG 14 to 6

DC terminals wire size AWG 18 to 6

STOP terminals wire size AWG 28 to 16

Gen Sense/Gen Start wire size AWG 30 to 12

Weight lb (kg) 64 (29)

Thermal management - forced convection

Temperature range ºF (ºC) -4 to 122 (-20 to +50)

Weatherization rating - NEMA 3R

Enclosure Material - powder-coated steel

Ratings

Description Units Min Nominal Max

Maximum Input Voltage (nanogrid) V 420

Range of Input Operating Voltage (nanogrid) V 360 400

Maximum input current (nanogrid) A 20

Maximum input short circuit current (nanogrid) A 30

Maximum input source backfeed current to input

source (nanogrid) A30

Output power factor rating (ac) - 1

Operating Voltage range (ac) 2ph V, rms 108 130

Operating Voltage range (ac) 3ph V, rms 106 132

Operating frequency range or single frequency Hz 59.6 60.4

Nominal output voltage (ac) V, rms 120/240 & 208, 3 ph

Normal output frequency (ac) Hz 60

Maximum continuous output current (ac) A, rms 32

Maximum output overcurrent protection A 50

Max output fault current and duration A/ms 50 / 17

Utility interconnection voltage and frequency trip

limits and trip times

Trip voltage and frequency limits

Trip Voltage Accuracy

Trip Time Accuracy - 2% +/-2 cycles

Normal operation temperature range ºF (ºC) -4 (-20) +122 (+50)

Output power temperature derating and maxi-

mum full power operating ambient

ºF (ºC) -4 (-20) +122 (+50)

Peak Efficiency % 97.5

CEC Weighted Efficiency % 97

Specifications are subject to change without notice. Refer to the product specification sheet for complete list.

See Generac PWRcell Inverter Installation Manual for more information.

6 Owner’s Manual for Generac PWRcell Inverter

General Information

Serial Number Location

Refer to Figure 2-1 to locate unit serial number (A).

Record the information from this tag in Table 1: Generac

PWRcell Inverter Important Information on the inside

front cover of this manual. When requesting assistance,

you may be asked to provide this information.

009954

Figure 2-1. Serial Number Location

Unit Dimensions

009955

Figure 2-2. Unit Dimensions

About Generac PWRcell Inverters

The Generac PWRcell Inverter connects to the Generac

PV Link™ and Generac PWRcell Battery to form the

Generac PWRcell system for grid-interactive solar-plus-

storage.

Upon the loss of grid power, Generac PWRcell Inverters

disconnect from the grid and provide AC power to

support protected loads when configured to do so.

All Generac PWRcell products use the REbus™ 380

VDC nanogrid to connect energy sources, storage, and

loads. The REbus nanogrid automates the flow of power

to enable plug-and-play setup and operation of Generac

PWRcell equipment. For more information about REbus,

visit www.generac.com.

In Figure 2-3 Generac PWRcell Inverter (E) is directly

connected to Generac PV Link (B) and Generac PWRcell

Battery (C) on DC (REbus) line (D). To the right of the

inverter are AC lines: 120/240 VAC for grid and home

loads (G), and protected loads (H) support up to 50 A.

009893

Figure 2-3. Generac PWRcell System Example

ASolar Panels EGenerac PWRcell Inverter

BGenerac PV Link FGrid

CGenerac PWRcell Battery GLoads

DREbus HProtected Loads

24.5 in (622 mm)

19.25 in (489 mm)

8 in (203 mm)

Andere Handbücher für PWRcell X7600 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Generac Power Systems Wechselrichter Handbücher

Generac Power Systems

Generac Power Systems 005040-0, 005040-1, 005053-0, 005053-1, 005054-0,... Bedienungsanleitung

Generac Power Systems

Generac Power Systems Guardian 004373-3 Bedienungsanleitung

Generac Power Systems

Generac Power Systems iX 2000 Bedienungsanleitung

Generac Power Systems

Generac Power Systems Quietsource 004917-2 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 004709-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 004700-0 Montageanleitung

Generac Power Systems

Generac Power Systems 941-2 Bedienungsanleitung

Generac Power Systems

Generac Power Systems Magnum MGG100M Bedienungsanleitung

Generac Power Systems

Generac Power Systems 02010-2, 04164-2 Service-Handbuch

Generac Power Systems

Generac Power Systems Quietsource 005220-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems Guardian 004188-1 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 5240 Montageanleitung

Generac Power Systems

Generac Power Systems 04389-3, 04456-3, 04390-3 Montageanleitung

Generac Power Systems

Generac Power Systems 2.4L Bedienungsanleitung

Generac Power Systems

Generac Power Systems Automatic Standby Generator Bedienungsanleitung

Generac Power Systems

Generac Power Systems Quietsource 005012-1 Bedienungsanleitung

Generac Power Systems

Generac Power Systems Air-cooled Generators Bedienungsanleitung

Generac Power Systems

Generac Power Systems 004614-1 Montageanleitung

Generac Power Systems

Generac Power Systems MDG25IF4 Bedienungsanleitung

Generac Power Systems

Generac Power Systems PWRcell XVT076A03 Montageanleitung

Generac Power Systems

Generac Power Systems QuietSource 005028-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems Guardian 005324-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 000595-1 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 004912-0, 004912-1, 004913-0, Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung