Generac Power Systems PWRcell XVT076A03 Bedienungsanleitung

SAVE THIS MANUAL FOR FUTURE REFERENCE

WWW.GENERAC.COM

1-888-GENERAC

(1-888-436-3722)

Owner’s Manual

Generac PWRcell™ Inverters

XVT076A03

XVT114G03

009954

(000209b)

WARNING

Loss of life. This product is not intended to

be used in a critical life support application.

Failure to adhere to this warning could result

in death or serious injury.

https://pwrfleet.generac.com

1-888-GENERAC

(888-436-3722)

Para español, visita: http://www.generac.com/service-support/product-support-lookup

Pour le français, visiter: http://www.generac.com/service-support/product-support-lookup

ii Owner’s Manual for Generac PWRcell Inverter

Use this page to record important information about your Generac Product

Record the information found on your unit data label on this page. See Serial Number Locations.

When contacting an Independent Authorized Service Dealer (IASD) or Generac Customer Service, always supply the

complete model number and serial number of the unit.

Table 1: Generac PWRcell Inverter Important Information

Unit Model Number

Unit Serial Number

Date Purchased

Commissioning Date

(000393a)

WARNING

CANCER AND REPRODUCTIVE HARM

www.P65Warnings.ca.gov.

Owner’s Manual for Generac PWRcell Inverter iii

Section 1:Introduction and Safety ................1

Introduction ..........................................................1

Read This Manual Thoroughly ....................................1

Safety Rules .........................................................1

How to Obtain Service .................................................1

General Hazards ..................................................2

Section 2:General Information .....................5

Specifications ......................................................5

Serial Number Location ......................................6

Unit Dimensions .................................................6

Component Locations .........................................6

About PWRcell Inverters .....................................6

Inverter Control Panel .........................................7

REbus Status LED ......................................................7

Inverter LED ................................................................7

Internet LED ................................................................8

Shutdown Mode ..........................................................8

System Modes Overview .....................................8

Grid Tie ........................................................................8

Clean Backup ..............................................................9

Priority Backup ............................................................9

Self Supply ..................................................................9

Self Supply Setpoints ................................................10

Section 3:Operation ....................................13

Operation and User Interface ....................................13

Home Screen ......................................................13

Selecting System Modes ...................................13

Device Pages ......................................................14

Enabling and Disabling Devices ................................14

Mod. Settings Menu ...........................................15

Ethernet Configuration ......................................17

Ethernet Setup ..........................................................17

Serial Number and Registration .......................17

Other External Communications

Generac Beacon ................................................17

Section 4:Maintenance ................................19

Service ................................................................ 19

Annual Maintenance ......................................... 19

Inspecting Vents ........................................................19

Cleaning Intake Filter ................................................19

Recovery From an Error State ......................... 19

iv Owner’s Manual for Generac PWRcell Inverter

This page intentionally left blank.

Introduction and Safety

Owner’s Manual for Generac PWRCell Inverter 1

Section 1: Introduction and Safety

Introduction

Thank you for purchasing a Generac PWRcell™ product.

The PWRcell inverter is a storage-ready inverter that

connects to PV Link™ optimizers and PWRcell batteries

to form the PWRcell system.

This owner’s manual provides instructions for

programming, configuring, registering and

commissioning the PWRcell Inverter. See the Generac

PWRcell Inverter Installation Manual for installation

instructions.

The information in this manual is accurate based on

products produced at the time of publication. The manu-

facturer reserves the right to make technical updates,

corrections, and product revisions at any time without

notice.

Read This Manual Thoroughly

If any section of this manual is not understood, contact

the nearest Independent Authorized Service Dealer

(IASD) or Generac Customer Service at 1-888-436-3722

(1-888-GENERAC), or visit www.generac.com for assis-

tance. The owner is responsible for correct maintenance

and safe use of the unit.

This manual must be used in conjunction with all other

supporting product documentation supplied with the

product.

SAVE THESE INSTRUCTIONS for future reference. This

manual contains important instructions that must be fol-

lowed during placement, operation, and maintenance of

the unit and its components. Always supply this manual

to any individual that will use this unit, and instruct them

on how to correctly start, operate, and stop the unit in

case of emergency.

Safety Rules

The manufacturer cannot anticipate every possible cir-

cumstance that might involve a hazard. The alerts in this

manual, and on tags and decals affixed to the unit, are

not all inclusive. If using a procedure, work method, or

operating technique that the manufacturer does not spe-

cifically recommend, verify that it is safe for others and

does not render the equipment unsafe.

Throughout this publication, and on tags and decals

affixed to the unit, DANGER, WARNING, CAUTION, and

NOTE blocks are used to alert personnel to special

instructions about a particular operation that may be

hazardous if performed incorrectly or carelessly. Observe

them carefully. Alert definitions are as follows:

NOTE: Notes contain additional information important to

a procedure and will be found within the regular text of

this manual.

These safety alerts cannot eliminate the hazards that

they indicate. Common sense and strict compliance with

the special instructions while performing the action or

service are essential to preventing accidents.

How to Obtain Service

For assistance, contact the nearest Independent Autho-

rized Service Dealer (IASD) or Generac Customer Ser-

vice at 1-888-436-3722 (1-888-GENERAC), or visit

www.generac.com.

When contacting an IASD or Generac Customer Service,

always supply the complete model and serial number of

the unit as given on its data decal located on the unit.

Record the model and serial numbers in the spaces pro-

vided on the front cover of this manual.

(000100a)

Consult Manual. Read and understand manual

completely before using product. Failure to

completely understand manual and product

could result in death or serious injury.

WARNING

(000001)

DANGER

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

(000002)

WARNING

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

(000003)

CAUTION

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Introduction and Safety

2 Owner’s Manual for Generac PWRCell Inverter

General Hazards •Connecting the PWRcell system to the electric util-

ity grid must only be done after receiving prior

approval from the utility company.

•Only competent, qualified personnel should install,

operate, and service this equipment. Strictly com-

ply to local, state, and national electrical and build-

ing codes. When using this equipment, comply with

regulations established by the National Electrical

Code (NEC), CSA Standard; the Occupational

Safety and Health Administration (OSHA), or the

local agency for workplace health and safety.

•Protection against lightning surges in accordance with

local electric codes is the responsibility of the installer.

NOTE: Lightning damage is not covered by warranty.

•Never work on this equipment while physically or

mentally fatigued.

•Any voltage measurements should be performed

with a meter that meets UL3111 safety standards,

and meets or exceeds overvoltage class CAT III.

(000191)

DANGER

Automatic start-up. Disconnect utility power and

render unit inoperable before working on unit.

Failure to do so will result in death or serious injury.

WARNING

Risk of injury. Do not operate or service this machine

if not fully alert. Fatigue can impair the ability to

service this equipment and could result in death or

serious injury. (000215)

(000209b)

WARNING

Loss of life. This product is not intended to

be used in a critical life support application.

Failure to adhere to this warning could result

in death or serious injury.

(000182a)

WARNING

Equipment damage. Only qualified service personnel may

install, operate, and maintain this equipment. Failure to

follow proper installation requirements could result in death,

serious injury, and equipment or property damage.

(000155a)

WARNING

Electric shock. Only a trained and licensed electrician

should perform wiring and connections to unit. Failure to

follow proper installation requirements could result in death,

serious injury, and equipment or property damage.

Equipment damage. Connect only to REbus-compatible

devices to the DC bus. Never connect to any other DC

power source. Connecting to other DC power sources

could result in equipment damage. (000598a)

CAUTION

Introduction and Safety

Owner’s Manual for Generac PWRCell Inverter 3

Electrical Hazards

(000104)

DANGER

Electrocution. Water contact with a power

source, if not avoided, will result in death

or serious injury.

(000604)

Electrocution. PWRcell Battery front cover should

be removed by a qualified technician only.

Removing the front cover could result in death,

serious injury, equipment or property damage.

DANGER

(000145)

DANGER

Electrocution. In the event of electrical accident,

immediately shut power OFF. Use non-conductive

implements to free victim from live conductor. Apply

first aid and get medical help. Failure to do so will

result in death or serious injury.

(000599)

Electrocution. Turn battery disconnect OFF and

de-energize REbus before touching terminals.

Failure to do so will result in death, serious injury,

equipment and property damage.

DANGER

(000152)

DANGER

Electrocution. Verify electrical system is

properly grounded before applying power.

Failure to do so will result in death or serious

injury.

(000188)

DANGER

Electrocution. Do not wear jewelry while

working on this equipment. Doing so will

result in death or serious injury.

(000187)

WARNING

Electrocution. Potentially lethal voltages are generated

by this equipment. Render the equipment safe before

attempting repairs or maintenance. Failure to do so

could result in death or serious injury.

Introduction and Safety

4 Owner’s Manual for Generac PWRCell Inverter

This page intentionally left blank.

Owner’s Manual for Generac PWRcell Inverter 5

General Information

Section 2: General Information

Specifications

Description Units XVT076A03 XVT114G03

Max. cont. grid-tied AC power @ 122°F (50°C) kW 7.6 11.4

Max. cont. islanded AC power @ 104°F (40°C)

with single 6 module battery cabinet1kW 9.0 9.0

Max. cont. islanded AC power @ 104°F (40°C)

with 2 battery cabinets (8 modules minimum) kW 11.0 Range 9.6 to 11.0*

Max. cont. Islanded AC power @ 122°F (50°C) kW 8.8 Range 7.5 to 8.8*

Peak motor starting current (2 sec) A rms 50

Normal output frequency AC Hz 60

Grid Voltage Line to Neutral (L-N) VAC 120

Grid Voltage Line to Line (L-L) VAC 240 208

Peak efficiency % 96 97

CEC weighted efficiency % 96.5 96.5

AC terminals wire size AWG 14 to 6

DC terminals wire size AWG 18 to 6

STOP terminals wire size AWG 28 to 16

Weight lb (kg) 62.7 (28.4)

Thermal management - forced convection

Weatherization rating - NEMA Type 3R

Enclosure Material - powder-coated steel

Description Units Min Nominal Max

REbus voltage V dc 360 380 420

REbus current A dc 302

REbus Input short circuit current3A dc 30

REbus Input source backfeed current to input source A dc 30

Output power factor rating AC - 1

Operating voltage range AC, XVT076A03 (L-N) V rms 108 120 130

Operating voltage range AC, XVT076A03 (L-L) V rms 216 240 260

Operating voltage range AC, XVT114G03 (L-N) V rms 108 120 130

Operating output voltage range AC, XVT114G03 (L-L) V rms 184 208 228

Continuous output current AC grid-tied A rms 32

PCS controlled current grid-tied Arms 32

Continuous output current AC islanded A rms 42

Output fault current duration A / ms 50 / 200

Full Power operating ambient temperature range4 °F (°C) -4 (-20) +122 (+50)

Utility interconnection voltage and frequency trip limits and

trip times See Voltage and Frequency Trip Thresholds in PWRcell Inverter

Installation Manual for more information.

Trip voltage and frequency limits

Trip voltage accuracy

Trip time accuracy % 2% +/- 2 cycles

1 Peak Performance

2 Inverter limits its REbus current to adhere to its AC power rating. Total REbus current capability from multiple REbus sources

may safely exceed this value as the inverter safely limits the amount utilized.

3 Rating for one DC input. Four total.

4 Includes ambient temperature rising from inverter operation.

* In Island mode XVT114G03 Protected loads only supply 2 phases 120 VAC L-N, 208 L-L which results in lower power than in grid

tied 3 phase mode.The low value of the range is for full L-L loading while high value of the range is full L-N loading.

6 Owner’s Manual for Generac PWRcell Inverter

General Information

Serial Number Location

Refer to Figure 2-2 to locate unit serial number (A).

Record the information from this tag in Table 1: PWRcell

Inverter Important Information on the inside front cover

of this manual.

Unit Dimensions

Figure 2-1. Unit Dimension

Component Locations

Figure 2-2. Component Locations

About PWRcell Inverters

The PWRcell inverter connects to PV Link™ optimizers

and PWRcell batteries to form the PWRcell system for

grid-interactive solar-plus-storage.

Upon the loss of grid power, PWRcell inverters

disconnect from the grid and provide AC power to

support protected loads when configured to do so.

All PWRcell products use the REbus™ 380 VDC

nanogrid to connect to each other. The REbus nanogrid

automates the flow of power to enable plug-and-play

setup and operation of PWRcell equipment. For more

information about REbus, visit www.generac.com.

In Figure 2-3 PWRcell inverter (E) is directly connected

to PV Link optimizers (B) and PWRcell battery (C) on DC

(REbus) lines (D). To the right of the inverter are AC

lines: 120/240 VAC for grid and home loads (G), and

protected loads (H) support.

A24-3/4 in (628 mm)

B19-3/8 in (491 mm)

C8-3/8 in (214 mm)

009651

009655

AControl panel

BIntake filter

CExhaust vent

DSerial number tag

009656

Andere Handbücher für PWRcell XVT076A03

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Generac Power Systems Wechselrichter Handbücher

Generac Power Systems

Generac Power Systems SD600 Bedienungsanleitung

Generac Power Systems

Generac Power Systems PWRcell XVT076A03 Montageanleitung

Generac Power Systems

Generac Power Systems Guardian 005261-1 Bedienungsanleitung

Generac Power Systems

Generac Power Systems Guardian 04389-2 Montageanleitung

Generac Power Systems

Generac Power Systems 004700-0 Montageanleitung

Generac Power Systems

Generac Power Systems SG30 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 04673-1 Montageanleitung

Generac Power Systems

Generac Power Systems 004090-2, 004091-2, 004092-2, 004093-2, 004094-2, 004095-2, 004096-2, 004097-2, 004474-0, 004124-1, 004125-1, 004126-1... Bedienungsanleitung

Generac Power Systems

Generac Power Systems 005261-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems Guardian Elite QT02516 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 4000XL 9777-2 Bedienungsanleitung

Generac Power Systems

Generac Power Systems ECOGEN SERIES Bedienungsanleitung

Generac Power Systems

Generac Power Systems 0K2502SPFR Bedienungsanleitung

Generac Power Systems

Generac Power Systems 005030-0 (15kW) Bedienungsanleitung

Generac Power Systems

Generac Power Systems ECOGEN 005818-0 Installations- und Betriebshandbuch

Generac Power Systems

Generac Power Systems 9600-3 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 00941-3 Service-Handbuch

Generac Power Systems

Generac Power Systems QuietSource 005028-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems MMG480DI4 Bedienungsanleitung

Generac Power Systems

Generac Power Systems QuietSource 005031-2 Bedienungsanleitung

Generac Power Systems

Generac Power Systems MLG8K Bedienungsanleitung

Generac Power Systems

Generac Power Systems Guardian Elite Whisper Test 5261 Bedienungsanleitung

Generac Power Systems

Generac Power Systems Guardian 005336-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 004270-1 Quietpact 75D Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung