Generac Power Systems 5464 Bedienungsanleitung

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature.......................................................................................................................................................................... -25 º C to 60 º C

Humidity............................................................................................................................................................................... 0 to 95% Non-Condensing

Power Supply..........................................................................................................................................................................................+12 or +24 VDC

Power Usage ............................................................................................................................................................................................ 6 Watts typical

Communication Line.......................................................................................................................... RS485 fully isolated twisted pair cable with shield

Maximum Cable Length.................................................................................................................................................................................... 4000 feet

Relay Output.............................................................................One NO contact (Engergized when annunciator is powered and no faults are present)

Relay Contact Rating.............................................................................................................................................................................. 30 VDC, 1 amp

STANDBY GENERATOR ACCESSORIES

21 Light Remote Annunciator

Liquid-Cooled Generator Sets

Model 5465

Model 5466

Model 5464

The Remote Annunciator Panel provides remote monitoring and

annunciation of up to 18 generator parameters using LED’s located on

the annunciator keypad. It also provides two system level warnings which

are System Ready and Communications OK.

The Relay panel has up to 8 selectable functions on form A relays,

and multiple relay panels can be connected for all 18 generator

parameters.

The speciﬁc faults can be selected using either the DIP switches located

on the annunciator circuit board or through a computer via the RS232

connection on the circuit board. All relays are energized on power up and

open during a fault condition.

Communication is via a RS485 serial data link and power is supplied by

the generator battery (+12 VDC or +24 VDC)

Note: These units are only compatible with the H-series generator

controller (70-150 kW)

DESCRIPTION

Speciﬁcations

Surface Mount Annunciator

21 Light Remote Annunciator

Flush Mount Annunciator

Function Color Alarm Latched

Pre-Low Oil Pressure Yellow nYes Yes

Pre-High Water Temp Yellow nYes Yes

Pre Low Water Temp Yellow nYes Yes

Pre-Low Fuel Yellow nYes Yes

Battery Charge AC Fail Yellow nYes No

Low Battery Voltage Yellow nYes No

High Battery Voltage Yellow nNo No

Not in Auto Red nYes No

RPM Sensor Loss Red nYes Yes

Overcrank Red nYes Yes

Overspeed Red nYes Yes

Low Oil Pressure Red nYes Yes

Hi Water Temp Red nYes Yes

Low Water Level Red nYes Yes

Emergency Stop Red nYes No

Gen Running Yellow nNo No

Gen Power (ATS) Yellow nNo No

Line Power (ATS) Green nNo No

Systems Ready Green nYes No

Communications OK Green nYes No

Spare Green nNo No

Spare Keypad Switch - Can be used to implement a remote start function. (Model 5464 only)

5.8

4.530.812 Dia.

0.812 Dia.

Both sides

0.86

9.06 1.64

2.32

6.49

11.42

8.27

9.64

Outside

Cut

Rough Opening

6.75 " x 9.88 "

Four mounting holes for

21 Light Annunciator

4-mm -0.7 Female Thread

1.57

Thru

R0.59

Both Sides

1.93

10.24

7.09

1.21

1.42

0.87

The 21-Light Annunciator can mount to

a ﬂat surface with connections through

the 0.812 Dia. knockout on the back

surface or through 0.812 knockouts on

sides as shown.

This Flush Mount Box is recessed

into the wall opening and the sur-

face mount annunciator mounts to

the (4) 4 mm screw holes on the

back surface. After wire connec-

tions are made the front annuncia-

tor cover is attached.

Generac Power Systems, Inc. • P.O. Box 297, Whitewater, WI 53190 • guardiangenerators.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Generac Power Systems Schalten Handbücher

Generac Power Systems

Generac Power Systems GenTran 6379 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GenReady Series 005448-2 Installationsanleitung

Generac Power Systems

Generac Power Systems 006852 Bedienungsanleitung

Generac Power Systems

Generac Power Systems Automatic Transfer Switch Bedienungsanleitung

Generac Power Systems

Generac Power Systems ILC Bedienungsanleitung

Generac Power Systems

Generac Power Systems GenTran 6295 Merkblatt

Generac Power Systems

Generac Power Systems SnapRS Bedienungsanleitung

Generac Power Systems

Generac Power Systems 004635-3 Bedienungsanleitung

Generac Power Systems

Generac Power Systems RTSG300A3 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GenTran 6295 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GenTran 6294 Bedienungsanleitung

Generac Power Systems

Generac Power Systems 09227-0 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GenTran 6379 Merkblatt

Generac Power Systems

Generac Power Systems rtg16eza1 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GenTran 6294 Bedienungsanleitung

Generac Power Systems

Generac Power Systems rtsy100a3 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GenTran 6294 Bedienungsanleitung

Generac Power Systems

Generac Power Systems TTS Series Bedienungsanleitung

Generac Power Systems

Generac Power Systems RTSX100A3 Bedienungsanleitung

Generac Power Systems

Generac Power Systems TMS200 Bedienungsanleitung

Generac Power Systems

Generac Power Systems GenTran 6294 Bedienungsanleitung

Generac Power Systems

Generac Power Systems rtg16eza1 Bedienungsanleitung

Generac Power Systems

Generac Power Systems RTSJ200A3 Bedienungsanleitung

Generac Power Systems

Generac Power Systems RTS Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung