GENERAL MOBILE GM Buddy Bedienungsanleitung

1.0 BEFORE USE

The VIDEO SMART WATCH and App have been carefully designed

to assist you in keeping safe and staying connected.

2.0 IMPORTANT SAFETY INSTRUCTIONS

The Video Smart Watch is designed to be IP67 Water Resistant.

The Video Smart Watch can be worn while washing hands and

daily activities that may incur minimal contact with water.

Your Video Smart Watch cannot be worn during showers or in

saunas as water vapour can enter and damage the watch.

Please don't wear it while swimming as prolonged exposure to

the water can potentially damage the watch.

CAUTION: To avoid short-circuiting your watch, keep the 5

charging pins (located on the back of the watch) away from

conducting material – such as metals, semiconductors and

nonmetallic conductors. STRAP TIPS AND PRECAUTIONS

If your child feels discomfort wearing the watch for prolonged

periods, encourage them to either adjust the watch strap or take

it off.

WARNING: Do not expose the straps to very wet conditions. Wet

straps can potentially cause skin irritations.

Before wearing, dry the straps first. If you experience any skin

irritation, please stop wearing the Smart Watch.

READ ALL INSTRUCTIONS BEFORE USE - PLEASE SAVE THESE

INSTRUCTIONS.

3.0 PACKAGE CONTENTS

1. 4G Video Smart Watch x1

2. USB Magnetic Charging Cable x1

3. User Manual x 1

4. Quick Start Guide x 1

The Video Smart Watch is compatible with devices running with

compatible devices using Android 6.0 or IOS 11.0 and later.

To operate the Video Smart Watch, it is advisable you purchase

your own compatible 3G/4G Nano-SIM before commencing

setup.

4.0 TECHNICAL SPECIFICATIONS

Memory: Display:

4GB (ROM) + 512MB (RAM) 1.4” IPS Touch Screen

Connectivity: Cellular +

Wi-Fi

Network:

FDD-LTE, WCDMA, GSM

Camera:

2.0MP

GPS:

Yes

Battery:

650mAh

Dimensions: 54.4 x

42.8 x 14.7mm

SIM Card Spec:

Nano SIM Type

(SIM Not Included)

COMPATIBLE BANDS

2G Bands

B2/3/5/8

3G Bands

B1/2/5/8

LTE Bands

B1/2/3/4/5/7/8/20/28AB/38/40/41

5.0 WATCH OVERVIEW

1. Power ON/ SOS

2. SIM Card

3. Touch Screen

4. Camera

5. Speaker

6. Microphone

7. Charging Points

6.0 OPERATING THE WATCH

6.1 COMPATIBLE SIM CARD

The Video Smart Watch operates best on specific networks and

its vital to select a reliable SIM card provider.

Your Watch is best supported by a Vodafone, Telstra or Optus

nano-SIM (either pre-paid or post-paid) with a minimum 2GB

capacity, so it can facilitate the Smart Watch's functions such as

voice and video calls, SMS and image sharing.

This will also ensure optimal coverage and best battery

performance.

If you are unsure of nano-SIM compatibility, speak to your chosen

network provider.

6.2 INSERTING THE SIM CARD

Use the pick provided to release the SIM card cover and insert

the SIM card into SIM plate.

6.3 CHARGING THE WATCH

Your Smart Watch is powered by a rechargeable Li-Ion battery.

WARNING: Do not disassemble, modify, or repair your Smart

Watch. Placing objects, such as magnetic stripe cards, including

credit cards, phone cards, passbooks, and boarding passes, next

to the Video Smart Watch can cause damage to the device’s

magnetic field.

NOTE: The Video Smart Watch cannot be used while charging.

1. Plug the supplied USB charging cable into a standard USB

power source (like a phone charger or computer).

2. Connect the USB charging cable's magnetic head to the Smart

Watch's charging point, as shown in picture above.

3. It takes approximately 3 hours to charge the Video Smart

Watch. Once fully charged, you will see fully charged battery

icon on the screen. If the watch is only partially charged it will

show a partially full battery or a percentage indicator.

CAUTION: Use only charging devices that are approved by

General Mobile to maximize your Smart Watch's battery life.

Using other accessories can cause damage and void your

warranty.

While charging, the Smart Watch and charger may become hot.

This won’t affect the Smart Watch's lifespan or performance and

is quite normal.

On occasion, the charger may stop charging if the battery

becomes too hot.

What to do if the Video Smart Watch becomes too hot while

charging?

1. Disconnect the charger from the Smart Watch and close any

running functions like camera and Wi-Fi.

2. Wait for the Watch to cool down. Once it has cooled down you

can then begin charging the Smart Watch again.

NOTE: Keep the USB charger and port from contact with

conductive materials, such as liquids, dust, metal powders,

and pencil leads.

6.4 POWERING YOUR WATCH VIDEO SMART WATCH POWER ON:

Press and hold the power button until the Smart Watch turns

ON. This button is on the right hand side of the watch face.

POWER OFF: On the Video Smart Watch, go to: Settings >

Shutdown > Shutdown (again).

7.0 UPDATING THE FIRMWARE ON THE SMART WATCH

It is strongly suggested to update watch firmware before first

time use and keep on checking for any update during regular

intervals.

To update the firmware on the Video Smart Watch, follow the

below steps:

1. Swipe from right to left on the Video Smart Watch's screen 7

times. This will take you to the 'More' screen.

2. Swipe up until you see 'Update' come up in the options. (This

is the last option).

3. Press 'Update' to check if there are any system updates. Press

the arrow in the middle of the screen to initiate the

system update.

4. Please note: To get the full potential of your Video Smart

Watch, the first smartphone it should be paired with, should

be belong to either that child’s parent or guardian. This

smartphone will function as the admin device with central

control.

8.0 GM BUDDY APP

To connect your watch to your smartphone, install the 'GM

BUDDY App' on your smartphone. You can download the app

from Google Play™ store or Apple IOS App Store.

It is compatible with select devices using Android 6.0 or IOS 11.0

and later.

8.1 PAIRING THE VIDEO SMART WATCH TO YOUR SMARTPHONE

1. You will need to have both your VIDEO SMART WATCH and

your smartphone handy. Once you have downloaded the GM

buddy App, open it on your smartphone.

2. If you do not have the latest version of the App, please update

this. This can be checked and updated through either the

Google Play or Apple App Store.

3. Open the GM buddy App and create an account. To do this

you will need to register your details and nominate an email

address. General Mobile will email you a verification code, so

please check your inbox and the junk folder.

4. Once registered, open your GM buddy App to start the pairing

process. Your smartphone will automatically open a screen

looking to connect to the VIDEO SMART WATCH's QR code.

This QR code can be found on the General Mobile watch by

swiping across to the green 'pair' icon screen. Tap to open the

QR code.

PAIRING THE GENERAL MOBILE WATCH TO A SECOND

SMARTPHONE Follow the above steps to pair to another

smartphone.

The primary parent/guardian smartphone will be asked to

approve a second smartphone via a notification.

The second smartphone will need to scan the pairing

QR code on the General Mobile watch that they are pairing with.

If your General Mobile watch is not close, you can ask the

General Mobile watch wearer to take a photo of the pairing QR

code and send it to you, then you can scan the sent QR code with

the App to pair your second smartphone.

8.2 UNPAIRING THE VIDEO SMART WATCH FROM YOUR

SMARTPHONE

1. Open the GM buddy App by tapping on the icon in your

smartphone.

2. Tap the Home button in the app on the bottom left.

3. When you are in the apps Home screen, tap on the upper left

hand profile image (unpair).

4. Tap the unpair below the QR code that is shown on the screen

and confirm.

9.0 GM BUDDY APP FEATURES & SETTINGS

Tap Home on the App to go to the main page.

To change the profile, click on the top left. The alerts section will

show you latest watch alerts.

If you have connected multiple watch's, you can select a watch to

view by following the below steps:

1. Go to the Home page on the app and tap on the top center

name with the down arrow.

2. A drop down menu will appear, showing each paired watch

linked to your account. Here you can view linked watch.

9.1 LOCATION

To view your child‘s location:

1. To access the Map, open the GM buddy App and tap the

'Location' icon on the bottom menu. The map will show a

marker with the current watch location and its 'last online'

time and date.

Each paired watch will show its location on the smartphone.

NOTE: Location time will only change if the location of the VIDEO

SMART WATCH changes.

9.2 GEOFENCE SETTING

The VIDEO SMART WATCH allows you to customize geographical

fencing boundaries. Every time the VIDEO SMART WATCH enters

or exits this geofence, you'll get an alert on your smartphone. To

create a geofence, follow the below steps:

1. Tap the icon on the right side of the Location Maps screen

to open the Geofence settings.

2. Tap the '+' on top right corner to add a new Geofence.

3. Zoom into the map to find the address you require for your

geofence. Hold down the screen for 3 seconds to change the

marker on the map for the new address.

4. Enter the name of the geofence you want to setup in the

'Enter Zone Name' section, e.g.: Evie's School, Nan's House,

Basketball Training etc.

5. Use the slider to set the meter distance you want the

Geofence to be (300m - 2000m)

6. Select whether you want to be alerted when the watch (and

its wearer) enters or exits the Geofence zone: For iOS users:

Tap the circle button next to 'Alert when enter Safe zone' and

'Alert when leave Safe zone'. They will have a green tick in the

box if they are selected.

For Android Users:

Tap the arrow next to 'Alert when enter Safe zone' and 'Alert

when leaves safe zone'.

7. Tap 'Finish' in the top right corner.

8. Tap 'Confirm' to finalize your geofence.

Easily create multiple geofence zones by using the above method.

9.3 CHAT

There are many ways to chat via your Wi-Fi, you can use voice or

video, or chat between your smart device and the VIDEO SMART

WATCH. To access the chat function:

1. Tap the 'Chat' icon on the bottom navigation bar in the App.

VOICE CALL: To initiate a voice call, on the GM buddy APP tap

'Voice Call.'

VIDEO CALL: To start a over the internet video call with VIDEO

SMART WATCH tap 'Video Call'.

DIRECT MESSAGE FEATURE: When making a call isn't practical,

you can send a direct message to the VIDEO SMART WATCH

wearer, by selecting their name in the Chat screen (this name

would have been added during initial pairing). In this chat, you

have the ability to type text, send emojis, share pictures, and

start video and audio calls by pressing the '+' button on the

bottom right of the chat window where you'll also see the

location. While your child can't send a text message back, they

can reply with an emoji or send a voice message back.

GROUP CHAT: For known adults who have the GM buddy App on

their smartphone and have paired it to your associated VIDEO

SMART WATCH, they can participate in a group chat.

Simply tap 'Group Chat' to start. It will have all the members

added by default who have successfully paired with the GM

buddy Smart Watch.

The administrator who initially paired the VIDEO SMART WATCH

can remove members from group chat.

1. Tap the '•••' in top right of the Group chat screen.

2. Tap the members' name which has to be removed.

3. Click 'Confirm' to proceed with this removal.

NOTE: Only one default group chat can be accessed.

9.4 ADD CONTACTS

The administrator can add contacts to the Smart Watch. They will

be saved on the VIDEO SMART WATCH approved call list.

To add new contacts to the VIDEO SMART WATCH follow the

below steps:

Tap the 'Settings' button on the bottom navigation bar on the GM

buddy App.

4. Tap 'Add Contacts'

5. Tap the '+' button on the top right screen to add a new

contact. Add contact's name and number.

6. You can add a new contact to the emergency list by selecting

ON 'Emergency call permission'.

7. Tap 'Finish' to finalize adding the new contact.

9.5 BLOCK UNKNOWN CALLS

You can restrict unknown callers from contacting your VIDEO

SMART WATCH wearer, by choosing to disable calls from numbers

that are not saved in the contact list.

1. Tap the 'Settings' button on the bottom navigation bar in the

GM buddy App.

2. Tap 'Add Contacts.'

3. Turn ON 'Block Unknown Calls' on the top of the screen by

selecting this option.

9.6 REMOTE MONITORING

The remote monitoring feature discreetly enables parents or

guardians to dial into their child's VIDEO SMART WATCH without

anyone knowing, via the GM buddy App.

After initiating this function, a window will pop up to enter the

phone number for the Smart Watch to remotely call.

Remote monitoring calls facilitate the user to listen in only. All

audio communication back to the VIDEO SMART WATCH will be

disabled during this call.

To enable the remote monitoring feature follow the below steps:

1. Tap the Settings button on the bottom navigation bar on the

GM buddy App.

2. Tap 'Remote Monitoring' and follow the prompt to add in the

phone number which can remote monitor.

3. Tap 'Confirm'

4. The VIDEO SMART WATCH will then remotely call the entered

number for you to listen in to your child's surroundings.

9.7 CLASSROOM MODE

The classroom mode function enables the parent/ guardian to

disable certain features of the watch to help minimize your child's

distractions when they are in class. In this mode, the VIDEO

SMART WATCH can only be used to check the time. All calls and

messages will be automatically blocked when this function is

active. To turn on the classroom function, follow the below steps:

1. Tap the 'Settings' button on the bottom navigation bar on the

GM buddy App.

2. Tap 'Classroom Mode.'

3. Tap the '+' icon on the top right of the screen. This will prompt

you to fill out the required information. Class Name, Start

time, End time and Days.

4. Once all information is entered tap 'Finish' on the top right

corner of the screen.

If you want to turn-off this feature, go into the Classroom mode

page, tap the green toggle button. Tap 'Confirm' to deactivate

this feature.

9.8 ALARM

Through the GM buddy App you can set unlimited alarms that are

only applicable to the VIDEO SMART WATCH.

To set alarms on the VIDEO SMART WATCH follow the below

steps:

1. Tap the Settings button on the bottom navigation bar on the

GM buddy App.

2. Tap 'Alarm' to access the Alarms you have set.

3. Tap the '+' icon on the top right corner of the screen. You will

then be prompted to fill in the required information. Alarm

Name, Time and Days.

4. Once all information is entered tap 'Finish' on the top right

corner of the screen.

NOTE: Alarms can only be enabled or disabled via the

GM buddy App, not from the VIDEO SMART WATCH.

To turn off the alarm, go to the Alarm page, and tap the green

toggle button. Tap 'Confirm' to disable the alarm.

9.9 REMOTE CAPTURE

The remote capture feature has been designed for parents and

guardians to check in on the wellbeing of their child. The remote

capture feature allows the parents to take a discreet picture from

the VIDEO SMART WATCH's built in camera. All photos taken

using this function will be saved in the GM buddy App.

To use the remote capture function, follow the below steps:

1. Tap the Settings button on the bottom navigation bar on the

GM buddy App.

2. Tap 'Remote Capture' to use this function. This will open up

the gallery of remotely captured images.

3. Tap the 'Capture' button on the bottom of this screen to take a

remote photo.

4. The photo will then appear in the gallery for you to view.

NOTE: Please note: taking multiple pictures via remote

capture drains the VIDEO SMART WATCH's battery. If

the mobile network connection is weak, photos will

take longer to come through to the App.

9.10 LOST MODE

Lost mode can be activated to help find the VIDEO SMART WATCH

if it has been lost or misplaced. When this is activated, the watch

will switch ON, its speaker volume turned up to maximum and

will automatically report its location to the GM buddy App. For

your security, the VIDEO SMART WATCH will also be remotely

locked and can only be unlocked by entering the Remote Lost

Password. No one will be able to use this VIDEO SMART WATCH

while in Lost Mode, protecting your data. The speaker volume is

automatically turned up for incoming calls and messages to help

you follow the sound to locate the VIDEO SMART WATCH.

1. Tap 'Activate Lost Mode.'

2. You'll be asked to enter a 6 digit Remote Lost Number of your

choice. Enter in number.

3. Tap 'Confirm' to activate this feature.

When you have found the watch, you will need to enter this 6

digit, lost password that was created in Step 2.

4. Tap 'Close' to deactivate 'Lost Mode' in the GM buddy App

9.11 POWER OFF

Parents and guardians are able to remotely Power OFF the VIDEO

SMART WATCH through the App.

Inhaltsverzeichnis

Andere GENERAL MOBILE Betrachten Handbücher

GENERAL MOBILE

GENERAL MOBILE GM Watch Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung