GENEVO PRO Leitfaden
USER + INSTALLATION MANUAL
Radar Detector Genevo PRO
Congratulations on your purchase of world's most
intelligent radar and laser detector Genevo PRO.
Main functions of Genevo PRO
Genevo PRO is the most advanced detector from Genevo family and is designed to protect the driver from speeding fines. Genevo
PRO communicates with driver in English language and its main functions are detection of microwave radars (K / Ka bands), red
light cameras and sectional speed cameras (using its own GPS database), MultaRadars CT/CD and radar Gatso RT3 and RT4, or
jamming laser guns. It also provides a quick deactivation of all functionality via removing the magnetic display. Genevo PRO also
displays connectivity status of GPS antenna and all connected radars and accessories. Disconnected GPS is signaled by flashing
GPS icon on the screen, and accessories are signaled in the same way by flashing the HWY, A-C or CTY icon.
Notifications:
Text warning and voice alert appears on Genevo PRO during radar alert. The strength of the signal and beeps expresses the
intensity of the received signal. Signal strength has ten levels. GPS alerts are reported by voice. For example “Speed Camera”.
Accessories alerts are reported by voice: „Laser”.
Control:
1) First button MENU / ON-OFF
Short press: You will enter into the setup menu.
During the signaling radar, you will mute the volume.
The next alarm will be reported again in the standard volume.
Long press: Turn ON / OFF Genevo PRO. During radar signaling, you enter the menu via long press
GENEVO
GRadar Detector Genevo PRO 1
2) Second button BRIGHTNESS / ALERT SUPPRESSION
Short press: You can change the brightness of the display - Bright -> Dim -> Smart Dark -> Full Dark. Long Press: If you hold
it during an alert you will mark the place of false radar reporting so at a given point detector during the next passage will be
suppressed. If you suppress a false alert, the detector will not detect radars. Hold button during the "suppressed" radar alert
and this listing will be canceled. After next passage radar alert will be signaled acoustically.
3) Third button SENSITIVITY / ADD YOUR OWN GPS POINT
Short press: You can scroll between Highway / City / Auto City modes. In City or Auto City modes the sensitivity of K / Ka bands
can be reduced according to user preference. Long Press: Add your own GPS point.
4) Buttons ⋀⋁
Short press: Changing volume of the detector.
Menu:
Press for entering into the menu.first button
Press the to go from one category to the next.second button
Press VOLUME or (on the right side of the detector) to change your setting within a category. To complete this change, ⋀ ⋁
simply wait a few seconds without pressing a button. The unit will display “Setting Completed” to confirm your selection.
Alternatively, you can get out of the menu by pressing the . After five seconds of inactivity, the menu will third button
automatically save and quit. Alternatively, you can quit the settings menu by pressing the mid button.
GENEVO
GRadar Detector Genevo PRO 2
Items in the menu are as follows:
(recommended settings are highlighted)
Front Radar: On / Off - Switches on Front Radar functionality. In case this option is turned off, further menu items controlling the Front
Radar are not displayed.
Rear Radar: On / Off - Switches on Rear Radar functionality. In case this option is turned off, further menu items controlling the Rear
Radar are not displayed.
Sensitivity: Highway / City / Auto City
Setting the speed in Auto City (item is present only if the sensitivity is set to Auto City): Through you are selecting second button
between speeds for editing (left number indicates the speed below which the detector will not respond to alerts. Right number
indicates the speed below which the detector will detect alerts like in City mode). buttons on the detector change the specific ⋀⋁
speed. When the detector is set up to “20 50” speed below 20 km/h on the radar will not respond. In the velocity range, 20-50 km/h will
only respond to stronger radar signals. Maximum detector sensitivity on the radar starts from 50 km/h.
Setting values City and Auto City sensitivity (entry is present only if the detector sensitivity is set to other than Highway): Via the second
button ⋀⋁ you can select radar band for editing. To change the signal level which will respond to radar signals use . The level of
suppression can be selected in the range 0-9. For example, when setting is X2 K2 and Ka2 the level of detection in all bands are slightly
decreased.
The minimum speed for signaling radar: Off, 10 km/h, 20 km/h, 30km/h ......... .. 130 km/h
GENEVO
GRadar Detector Genevo PRO 3
F - K-Band: Wide / Narrow / Instant Only / Off (In countries, where police use K band radars, it is recommended to use K Narrow setting)
F - K Filter: Off / Low / High - Filtering false alerts from blind spots and ACC. (When K Filter is activated, pulsed radars such as Iskra are
not detected)
F - Ka-Band: Wide / Narrow / Off
F - Ka 34.0 On / Off (if you are sure that police in your region does not use this band, then Off)
F - Ka 34.3 On / Off (if you are sure that police in your region does not use this band, then Off)
F - Ka 34.7 On / Off (if you are sure that police in your region does not use this band, then Off)
F - Ka 35.5 On / Off (if you are sure that police in your region does not use this band, then Off)
F - Ka Filter: Off / Normal / High - Filtering false alerts from blind spots and ACC. (When Ka Filter is activated, detection distance on Ka band
radars is slightly reduced. We recommend using „Normal“ which is very good in sensitivity/false alerts immunity ratio.)
F - Laser: On / Off
F - MR CT: Wide / Narrow / Off - These radars are being used in countries SR, A, PL, NL, ES, P, LT. We recommend using „Narrow” settings in
these countries. In any other country, we recommend to leave the function „Off”.
F - MR CD: Wide / Narrow / Off
F - Gatso RT3: On / Off
F - Gatso RT4: On / Off
F - MR Filter: Low / High / Off - Filtering false alerts from blind spots and ACC. (When MR Filter is activated, detection distance on MR band
radars is slightly reduced. We recommend using „Normal“ which is very good in sensitivity/false alerts immunity ratio.)
GENEVO
GRadar Detector Genevo PRO 4
R - K-Band: Wide / Narrow / Instant Only / Off (In countries, where police use K band radars, it is recommended to use K Narrow setting)
R - K Filter: Off / Low / High - Filtering false alerts from blind spots and ACC. (When K Filter is activated, pulsed radars such as Iskra are not
detected)
R - Ka-Band: Wide / Narrow / Off
R - Ka 34.0 On / Off (if you are sure that police in your region does not use this band, then Off)
R - Ka 34.3 On / Off (if you are sure that police in your region does not use this band, then Off)
R - Ka 34.7 On / Off (if you are sure that police in your region does not use this band, then Off)
R - Ka 35.5 On / Off (if you are sure that police in your region does not use this band, then Off)
R - Ka Filter: Off / Normal / High - Filtering false alerts from blind spots and ACC. (When Ka Filter is activated, detection distance on Ka band
radars is slightly reduced. We recommend using „Normal“ which is very good in sensitivity/false alerts immunity ratio.)
R - Laser: On / Off
R - MR CT: Wide / Narrow / Off - These radars are being used in countries SR, A, PL, NL, ES, P, LT. We recommend using „Narrow” settings in
these countries. In any other country, we recommend to leave the function „Off”.
R - MR CD: Wide / Narrow / Off
R - Gatso RT3: On / Off
R - Gatso RT4: On / Off
GENEVO
GRadar Detector Genevo PRO 5
GENEVO
G
R - MR Filter: Low / High / Off - Filtering false alerts from blind spots and ACC. (When MR Filter is activated, detection distance on MR band
radars is slightly reduced. We recommend using „Normal“ which is very good in sensitivity/false alerts immunity ratio.)
Jammer: ALP / FF / Off - Turns on accessories. Please note, that it is important that you would select the correct type of accessories you have
installed in your car, for the PRO will not work as intended if your settings are incorrect.
Parking Assistance: On / Off
Jamming: Off / 1s / 2s / … / 9s / Unlimited - Sets the length of laser gun jamming.
Display Mode: Speed/Time, Speed/Voltage, Battery Voltage, Time, Speed, Speed/Compass Auto Mute: On / Off: If it´s activated, after two
seconds of ongoing alert the volume will be reduced.
Alert type: Voice first / Beep first / No voice - Allows you to set if you want to be alerted first via voice alert or beeping sound.
Voice first / Beep first - Sets if the user will be first alerted with voice or beeps.
Startup sound: On / Off
GPS connect announce: On / Off
GPS detection by database type: Via you can select the type of GPS points. For editing use . You can turn on and off Second button ⋀⋁
particular type of point.
GPS warning distance: Normal (approx. 250m) / Farther (approx. 375m) / Farest (approx. 500m)
Unit: Imperial (mph) / Metrics (km/h)
Radar Detector Genevo PRO 6
GENEVO
G
Setting local time: You can change time zone via ⋀⋁
Language: English / Deutsch / Czech
Factory reset: For reset press .third button
Delete all user points: For deleting all user points press .third button
S/N: XXXXX - Displays you Serial Number, that might be needed for you Genevo PRO Update
SpeedMeter Option:
This function is intended for the legalization of the detector when used in countries where radar detectors are prohibited.
The detector stops alerting to radars and lasers. Nothing but your current speed will appear on the display and all radar and
laser detection settings will disappear from the menu. When entering the menu, you will be notified of deactivated
functions. To activate the Speedmeter, you must have the detector switched on and press and hold together and the second
third button on the display for five seconds. Then (SpeedMeter ON) appears on the display and the radar and laser detection
functions are completely deactivated. To re-activate the detector, simply update it the usual way through the computer and
all functions will be available again.
Radar Detector Genevo PRO 7
Database Updates:
Database update is recommended to check once in three months.
Download the new database is performed according to the instructions
www.genevoupdate.com while at www.genevo.com/en/updates-subscription
you can register and receive notifications of new and updated database to your email.
GENEVO
G
Operating frequency:
GPS: SiRF STAR IV
Ka narrow: 34,0GHz, 34,3GHz, 34.7GHz, 35,5GHz
(±120MHz)
Ka wide: 33.4 GHz ~ 36.0 GHz
K narrow: 24.125GHz (±70MHz)
K wide: 24.125GHz (±150MHz)
MultaRadar CD/CT, Gatso RT3 / RT4
Laser: 904nm
Technical parameters:
Operation temperature: -20 +85 °C
Storage temperature: -20 +85 °C
Operation voltage: 11 – 26 V
Energy consumption: 250mA normal, 330mA
max. (at 12V)
Dimensions: 62 * 92 * 34 mm
www.genevoupdate.com
Radar Detector Genevo PRO 8
GENEVO
G
Instalation manual Genevo PRO
A
B
E
F
G
GG
G
E
C
D
Radar Detector Genevo PRO 9
Inhaltsverzeichnis
Andere GENEVO Radarwarngerät Handbücher
GENEVO
GENEVO MAX Bedienungsanleitung
GENEVO
GENEVO MAX Bedienungsanleitung
GENEVO
GENEVO One Bedienungsanleitung
GENEVO
GENEVO GENEVO GPS+ Bedienungsanleitung
GENEVO
GENEVO PRO II Leitfaden
GENEVO
GENEVO MAX Bedienungsanleitung
GENEVO
GENEVO One S Black Edition Bedienungsanleitung
GENEVO
GENEVO PRO II Leitfaden
GENEVO
GENEVO one eco Bedienungsanleitung
GENEVO
GENEVO One S Bedienungsanleitung
