Genie IntelliG 850 Referenzhandbuch

Quick Reference Card for

Setting Limits & Remote

Programming

Setting Limits & Remote Programming for

IntelliG®, TriloG®, GPower®&

ReliaG®850 & 650 Models

For detailed instructions refer to owner’s manual. 800-35-GENIE.

WARNING: DO NOT use wall console until limits have been set.

WARNING: Bullet MUST be engaged to carriage BEFORE setting limits.

PROGRAM

SET

PROGRAM

SET – +

HOLD

2 seconds

HOLD

2 seconds

2Press and hold the down arrow button (-) for

2 seconds until the long LED comes on blue

(round LED remains off).

PROGRAM

SET – +

3Release down arrow button (-) and the long LED

will begin ﬂashing.

PROGRAM

SET – +

PROGRAM

SET – +

HOLD

4Press and hold the down arrow button (-) until

garage door is fully closed on ﬂoor, then release.

PROGRAM

SET

PROGRAM

SET – +

5Press and release the Program Set button (both

LEDs ﬂash blue and go off).

The down limit is now set.

Setting Down Limits: Setting Up Limits:

PROGRAM

SET

PROGRAM

SET – +

HOLD

2 seconds

HOLD

2 seconds

6Press and hold the up arrow button (+) for

2 seconds until the long LED light comes on blue

(round LED remains off).

PROGRAM

SET – +

7Release up arrow button (+) and the round LED

will begin ﬂashing.

The up limit is now set.

PROGRAM

SET

PROGRAM

SET – +

9Press and release the Program Set button (both

LEDs ﬂash blue and go off).

PROGRAM

SET – +

PROGRAM

SET – +

HOLD

8Press and hold the up arrow button (+) until door

is fully open, then release. Watch carriage as

it approaches the powerhead to avoid contact

with powerhead.

If both LEDs turn RED at this time, return

to Step 1, Setting Down Limits.

Press and release the same button on the remote

(the door should open or close).

To clear remote memory completely from the powerhead -

Press the Program Set button on the power head and hold for 2 seconds. The

round LED will come on. Release the Program Set button and the round LED

goes off. The long LED now ﬂashes purple. Press the up arrow button and down

arrow button simultaneously on the power head and hold until both LEDs ﬂash

blue and go off.

Force and speed are set.

10 Open and close your garage door using the Wall

Console Open/Close button.

PROGRAM

SET – +

Release the

ProgramSetbutton

(the long LED

begins ﬂashing purple).

PULL

Remove protective ﬁlm for battery from remote.

PROGRAM

SET – +

Press and release the button you have choosen

on the Remote (long LED comes on purple).

PROGRAM

SET –

PROGRAM

SET –

Press and release the same button on the remote

(both LED’s ﬂash blue and then turn off).

Setting Force & Speed:

PROGRAM

SET – +

HOLD

2seconds

Press and hold the Program Set button (the round

LED turns blue).

Programming Remotes:

Accessories provided with your powerhead may vary. These programming

steps will work for all current powerheads that are provided with a 1-button or

3-button remote as well as a multi-function or doorbell style wall control.

Dieses Handbuch passt für folgende Modelle

Andere Genie Garagentoröffner Handbücher

Genie

Genie screwdriver Bedienungsanleitung

Genie

Genie GCL-LJ Series Bedienungsanleitung

Genie

Genie Screw Drive Models Bedienungsanleitung

Genie

Genie 2020L Series Bedienungsanleitung

Genie

Genie GPOWER 900 Betriebsanleitung

Genie

Genie 1028 Handbuch

Genie

Genie Screw Drive Programmierhandbuch

Genie

Genie GCL-J Bedienungsanleitung

Genie

Genie SC 1500 Handbuch

Genie

Genie GPS-IC Series Bedienungsanleitung

Genie

Genie 2024 Bedienungsanleitung

Genie

Genie M-4500 Bedienungsanleitung

Genie

Genie 38416A.S Gebrauchs- und Pflegehandbuch

Genie

Genie GCL-J&H 1/2HP Bedienungsanleitung

Genie

Genie WIRELESS KEYPAD-IC Montageanleitung

Genie

Genie 2562 Programmierhandbuch

Genie

Genie Excelerator Bedienungsanleitung

Genie

Genie GCL-GH Bedienungsanleitung

Genie

Genie 4560 Handbuch

Genie

Genie GCL-MJ Bedienungsanleitung

Genie

Genie 2562 Bedienungsanleitung

Genie

Genie Protectrix18M Montageanleitung

Genie

Genie DirectLift 2060 Bedienungsanleitung

Genie

Genie POSTER Programmierhandbuch

Beliebte Garagentoröffner Handbücher anderer Marken

Dorma

Dorma ES 90 Bedienungsanleitung

Garaga

Garaga SECURITY+ 3265GCM 1HP Bedienungsanleitung

Chamberlain

Chamberlain Whisper Drive SECURITY+ WD822K Series Bedienungsanleitung

Chase Doors

Chase Doors DuraShield Bedienungsanleitung

CSI

CSI Classic Bedienungsanleitung

HATO

HATO 120 Bedienungsanleitung

Chamberlain

Chamberlain Elite 3575S Bedienungsanleitung

Richmond

Richmond GTR156 Bedienungsanleitung

Raynor

Raynor 1280RGD Bedienungsanleitung

CAME

CAME F4000 Series Bedienungsanleitung

B&D

B&D Controll-A-Door 5 Bedienungsanleitung

BFT

BFT PRV AA SL Bedienungsanleitung

Craftsman

Craftsman 139.53924 Bedienungsanleitung

Chamberlain

Chamberlain MyQ 940ESTD Bedienungsanleitung

Automatic Technology

Automatic Technology GDO-9V1 SecuraLift Bedienungsanleitung

Westfalia

Westfalia 19 36 07 Bedienungsanleitung

Chamberlain

Chamberlain HD520EVP Bedienungsanleitung

Cardin

Cardin BL Series Bedienungsanleitung