Genius KYE Systems SP-HF2000X Bedienungsanleitung
S
SE
ER
RV
VI
IC
CE
E
G
GU
UI
ID
DE
E
KYE SYSTEMS CORP.
S
SP
P-
-H
HF
F2
20
00
00
0X
X
Version:1.0
Total 16 Pages (Cover Page included)
Version: 1.0 Page 1/15
Version Date Changes
1．0 Official Release
s
Guide
ervice SP-HF2000X
Revision Histor
y
Version: 1.0 Page 2/15
Revision History……………………………………………………………………..1
Table of Contents………………………………………………… ………….2
Getting Started………………………………………………… ……….……………....3
Conventions Used in this Guide………………… ………...……………….3
Safety Precautions……………………………… ………………...………..3
Chapter1. How to Handle Defective Returns………………… ……………………….4
1.1 Overview……………………………………………………………….4
1.2 Problems………………………………………………………………..5
1.2.1 Power LED (indicator) Unlighted………………...……………......6
1.2.2 Does not work or one channel no sound……………………….…..7
1.2.3 Noise……………………………………………………………….7
Chapter2. Specifications………………………………………………………………..8
Chapter3. Block Diagram……………………………………………………………....9
Chapter4. Exploded View…………………………………………………………….…10-11
Chapter5. Part List……………………………………………………………………..12-13
Chapter6. Important Notes…………………………………………………………....14
6.1 Packing Requirement for sending the PCBAssembly by post……….…14
6.2 Short of Spare Parts while Repairing a Speaker System…………….….14
Chapter7. Circuit Schematic……………………………………………………………15
s
Guide
ervice SP-HF2000X
Table of Contents
Version: 1.0 Page 3/15
Conventions Used in this Guide
Pay Special Attention: Instructions that areimportantto
remember and may prevent mistakes.
Safety Precautions
The following precautions should be observed in handling the speaker described in this guide:
Place the speakers on a flat level and stable surface.
Do not place the speakers in environments subject to mist, smoke, vibration, excessive dust, salty
or greasy air, or other corrosive gases and fumes.
Do not drop or jolt the speakers.
Do not allow anything to drop into the subwoofer case through its ventilator, as it could result
in fatal electric shock or fire.
Place the unit far enough from other equipments for good heat dissipation.
Disconnect the AC power cord from the AC outlet before performing any maintenance on the
speakers.
Do not perform any maintenance with wet hand.
Prevent foreign substance, such as water, other liquids or chemicals, from entering the speakers
while performing maintenance procedures on the speakers.
s
Guide
ervice SP-HF2000X
Getting Started
Attention
Caution: Information that, if not followed, may result in
damage to the product.
Version: 1.0 Page 4/15
1.1 Overview
s
Guide
ervice SP-HF2000X
Chapter 1. How to Handle Defective Returns
Receiving Defective
Speakers
from Customers
Verifying problems&
Proceeding necessary tests
Analyzing possible
Malfunction causes
Deciding & proceeding
the rectification methods
Replacing necessary
Defective parts
Proceeding tests
To verify if the speaker is
functioning normally
Functioning OK
Return the speakers with
Pro
p
er re
p
acka
g
in
g
to customers
Functioning NG Functioning OK
Functioning NG
Version: 1.0 Page 5/15
1.2 Problems
Item Problemdescriptions
1.2.1 Power LED (indicator) unlighted
1.2.2 Does not work or one channel no sound
1.2.3 Noise
s
Guide
ervice SP-HF2000X
Version: 1.0 Page 6/15
Attention
1.2.1 Power LED (indicator) unlighted
s
Guide
ervice SP-HF2000X
Please follow the numbered sequence marked within parenthesis given in individual
Flow chart, in that this is the best-recommended sequence to rectify the problems.
Problem
Analyze
and
Identify
the Causes
Solutions
Secondary wire Of
transformer is
Disconnedcted of
defective
CheckD1.2
.5.6
Check
LED D7 Defective power
Switch SW1
Resolder or replace defective component（s）
Power LED （indicator）unlighted
Version: 1.0 Page 7/15
1.2.2 Does not work or one channel no sound
1.2.3 Noise
s
Guide
ervice SP-HF2000X
Problem
Analyze and
Identify the
Causes
Solutions
Does not work or
One channel no sound
Broken o
r
Short circuit Defective IC
U1.2.3.4
Defective
Audio cable
Replace
Audio cable Check solde
r
Points on PCB
And resolder
defective one(s)
Check and replace
Defective IC
Problem
Analyze and
Identify the
Causes
Solutions
Noise
Defective VR
Volume.treble .bass Defective IC
U1.2.3.4
Check and replace
defective component(s) Replace
Defective VR Replace defective IC
Component(s) aroun
d
IC is/are defective
Version: 1.0 Page 8/15
Satellite
No
. DESCRIPTION UNIT NOMINAL LIMIT
FR FL
1. FRONT OUTPUT POWER @THD 10% W 33 33 ≥30
2 SENSITIVITY（1KHz）@RATED O/P
POWER
mV 320 320
±50
3 SENSITIVITY(1KHz)@1W O/P POWER mV 50 50 ±15
4 MAX INPUT LEVEL@1% THD mV 250 50 ±40
5 FREQUENCY RESPONSE(1KHz=0dB)
40Hz dB -3 -3
±0.5
1K dB 0 0
±0.5
20K dB -3 -3
±0.5
6 S/N @RATED O/P POWER dB 65 65 ≥60
7 CHANNEL UNBALANCE @REF O/P
POWER
dB 0.3 0.3
≤0.5
8 CHANNEL SEPARATION(ONE
CHANNEL IN; OTHER CHANNEL INPUT
SHORTING)
dB 45 45
≥40
9 HUM NOISE (VR MAX)
(VOLUME MAX; INPUT SHORTING)
mV 5 5
≤10
10 HUM NOISE (VR MIN)
(VOLUME MIN. INPUT SHORTING)
mV 3 3 ≤5
s
Guide
ervice SP-HF2000X
Chapter 2. Specifications
Version: 1.0 Page 9/15
ICTDA2050
ICTDA2050
AUDIO IN
AUX IN R&L VOL CONTROL IC MC4558 TREBLEA&BASS
ADJUST CONTROL
PHONE OUT
GAIN CONTROL
AMPLIFIER
AMPLIFIER
R SPKER OUT
L SPKER OUT
AMPLIFIER
AUDIO IN VOL CONTROL
AUDIO R AUDIO R AUDIO R AUDIO R
AUDIO L AUDIO L AUDIO L AUDIO L
IC MC4558
GAIN CONTROL
AC1
ACIN
！
SW?
POWER
！
C001
103M/400V
15VACx2/2.0A
T2A/250V 130C
！
EI-66
POWER SUPPLY
+ -POWER
SUPPLY
+ - 12VDC P OWER
SUPPLY
s
Guide
ervice SP-HF2000X
Chapter 3. Block Diagram
Inhaltsverzeichnis
