Gentec SC0501 Bedienungsanleitung
SC0501
Compact Scaler Switcher
All Rights Reserved
Version: SC0501_2015V1.8
User Manual
Compact Scaler Switcher (with PoC)
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
Compact Scaler Switcher (with PoC)
NOTICE:
1. Please read this user manual carefully before using this product.
2. The item PoC is short for Power over Cable, and when the power adapter is
connecting with HDMI Twisted Pair PoC Receiver, Compact Scaler Switcher can’t
be energized through PoC.
3. The receiver works with Compact Scaler Switcher can only be HDMI Twisted Pair
PoC Receiver.
4. The item “far-end” means the device (e.g. display device, 3rd party RS232 device
etc) connected with HDMI Twisted Pair PoC Receiver.
5. Take notice to 4.6 Instructions of VGA Converting Cable when using.
6. Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
This manual is for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till January 2015. Any changes of
functions and parameters since then will be informed separately. Please refer to
the dealers for the latest details.
All rights reserved. No part of this publication may be copied or reproduced
without the prior written consent.
All product function is valid till 2015-01-12.
Compact Scaler Switcher (with PoC)
Contents
1. Introduction .................................................................................................................1
1.1 Introduction to Compact Scaler Switcher...........................................................1
1.2 Features ............................................................................................................1
1.3 Package Contents .............................................................................................1
2. Product Appearance ...................................................................................................2
2.1 Compact Scaler Switcher Front Panel...............................................................2
2.2 Compact Scaler Switcher Rear Panel ...............................................................4
3. System Connection.....................................................................................................5
3.1 Usage Precautions ............................................................................................5
3.2 System Diagram ................................................................................................5
3.3 Connection Procedure.......................................................................................6
3.4 Connection of Microphone.................................................................................6
3.5 Application .........................................................................................................9
4. System Operations .....................................................................................................9
4.1 Operations of Front Panel Buttons ....................................................................9
4.1.1 Resolution Adjusting ................................................................................9
4.1.2 Switching Operations...............................................................................9
4.1.3 Volume Adjusting ...................................................................................10
4.1.4 Used in OSD Menu................................................................................11
4.1.5 Software updating:.................................................................................11
4.2 Operations of IR ..............................................................................................12
4.2.1 IR Remote .............................................................................................12
4.2.2 IR Operations ........................................................................................13
4.3 Operations of CEC Function............................................................................14
4.4 Operations of RS232 Control...........................................................................15
4.4.1 Installation/uninstallation of RS232 Control Software ............................15
4.4.2 Basic Settings........................................................................................15
4.4.3 RS232 Communication Commands ......................................................16
4.4.4 Control Compact Scaler Switcher or 3rd Party Device from Local.........24
4.4.5 Control Compact Scaler Switcher from Local or Remote ......................25
4.5 Operations in OSD Menu.................................................................................26
Compact Scaler Switcher (with PoC)
4.5.1 Option....................................................................................................26
4.5.2 Picture ...................................................................................................28
4.5.3 Sound ....................................................................................................28
4.5.4 Setup .....................................................................................................29
4.6 Instructions of VGA Converting Cable .............................................................30
5. Specification .............................................................................................................31
6. Panel Drawing ..........................................................................................................33
7. Troubleshooting & Maintenance ...............................................................................33
8. After-sales Service....................................................................................................35
Compact Scaler Switcher (with PoC)
1
1. Introduction
1.1 Introduction to Compact Scaler Switcher
Compact Scaler Switcher is a compact mini scaler switcher with 5 video inputs (3
HDMI, 2 VGA) and 6 audio inputs (3 HDMI audio & 2 VGA audio: switched following the
video; 1 MIC audio input). As the VGA input supports VGA, YPbPr and C-video, so the
scaler switcher is compliant with multiple video signals.
Compact Scaler Switcher scales & switches any video signal to HDMI output and
HDBaseT output (supports PoC, connects with HDMI Twisted Pair PoC Receiver, max
transmission distance is 60 meters).
And with 1 IR IN, 5 IR OUT & 1 RS232, IR & RS232 signal can be transmitted bi-
directionally between Compact Scaler Switcher and HDMI Twisted Pair PoC Receiver.
1.2 Features
Compliant with HDCP
Supports CEC, with commands to enable/disable this function
Supports video source auto-switching function
Bi-directional IR & RS232 control
Output resolutions selectable to assure preferred output, and supports various
output resolutions, such as 1920x1200, 1920x1080, 1600x1200, 1360x768,
1280x800, 1280x720, 1024x768
VGA video supports C-video, YPbPr and VGA
Supports online software upgrading
48V phantom power to support condenser microphone
MIC port supports balance/unbalance signal, suppress the external noise effectively
3-level MIC input, supports condenser microphone, dynamic microphone and
wireless microphone
Controllable via button, IR & RS232
Powerful OSD function
1.3 Package Contents
1 x Compact Scaler Switcher
2 x Mounting ears (for Compact Scaler Switcher)
1 x HDMI Twisted Pair PoC Receiver
2 x Mounting ears (for HDMI Twisted Pair PoC Receiver)
5 x Screws (black color)
7 x Captive screw connectors
Compact Scaler Switcher (with PoC)
2
1 x IR receiver (with carrier wave)
1 x IR emitter
2 x VGA to YPbPr cables
2 x RS232 cable
8 x Plastic cushions
1 x IR remote (Cell battery is not included)
1 x Power Adapter (DC 12V)
1 x User Manual
Notes：Please confirm if the product and the accessories are all included, if not,
please contact with the dealers.
2. Product Appearance
2.1 Compact Scaler Switcher Front Panel
①Power indicator
Illuminate red when power on, turn green in standby mode.
②LCD screen
Show real-time system working status
③SOURCE/AUTO
Used as video source selection button, press to select one source, press again
to select next source, switching circularly between HDMI1, HDMI2, HDMI3,
VGA1 and VGA2. The LCD screen will show the name of selected source.
Used as switching mode selection button, press and hold for 7seconds or
more to enter in Auto-switching mode, press and hold for 7seconds or more
again to enter in Manual-switching mode.
Note: Setting any VGA port to AV or YPbPr in Manual-switching mode, the system will
not be able to enter in Auto-switching mode. While in Auto-switching mode, setting any
VGA port to AV or YPbPr will automatically enter in Manual-switching mode, and the
LCD screen and RS232 control software will prompt “Not support!”.
Compact Scaler Switcher (with PoC)
3
④ENTER
Confirm selection in menu.
⑤RESO/AUTO
Used as output resolution manual switching button, select among 1920x1200,
1920x1080, 1600x1200, 1360x768, 1280x800, 1280x720, 1024x768.
Used as output resolution switching mode selection button, press and hold for 7
seconds or more to enter in Auto-switching mode, press and hold for 7
seconds or more again to enter in Manual-switching mode.
⑥MENU/FWUPDATE
Used as menu button, press it to enter in OSD menu.
Used as software updating button, press and hold for 7 seconds or more to
enter in software updating procedure.
⑦VOL-
Used as volume down button.
Used as direction button NEXT in menus.
⑧MIC+
Used as MIC volume up button.
Used as direction button MOVE UP in menus.
⑨VOL+
Used as volume up button.
Used as direction button PREVIOUS in menus.
⑩MIC-
Used as MIC volume down button.
Used as direction button MOVE DOWN in menus.
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
Compact Scaler Switcher (with PoC)
4
2.2 Compact Scaler Switcher Rear Panel
①AUDIO INPUT
Including 3 HDMI audio & 2 VGA audio inputs
User can choose any one audio (embedded HDMI audio or external input audio) for
HDMI audio input by sending RS232 commands.
②AUDIO OUTPUT
Audio output port, the audio comes from the input audio corresponding to the
selected video source and mixed with MIC audio.
③IR OUT
5 in total, connect with IR emitters to control local source devices or Compact
Scaler Switcher from remote, switched along with corresponding video source.
④IR IN
Connects with IR receiver (with carrier wave only), to receive IR signal send by the
IR remote or remote controller of other input/output device.
⑤FIRMWARE
USB port, connects with USB flash disk or other storage which is with update file
inside, to update the system firmware.
⑥RS232
Serial control port, 3-pin captive screw connector, connect with a control device
(such as a computer) to control Compact Scaler Switcher or other devices
connected with HDMI Twisted Pair PoC Receiver.
⑦DC 12V
Power port, connect with DC 12V power adapter.
⑧MIC
a) MIC port
Connect with microphone
b) Dial switch
Including 3 levels: 48V phantom power mode (connect with condenser
Compact Scaler Switcher (with PoC)
5
microphone), MIC mode (connect with dynamic microphone) and LINE mode
(connect with wireless microphone or line audio).
⑨VIDEO INPUT
Video input ports, include 3 HDMI inputs & 2 VGA inputs.
VGA ports support YPbPr, C-video and VGA format. Factory default is VGA format.
⑩OUTPUT
c) HDMI local output
d) HDBaseT output, support PoC.
The two ports share the same audio signal, and the audio signal is mixed with MIC
audio and HDMI embedded audio (output audio). If disabling HDMI embedded audio
output, there will be no audio output through these ports.
Note: Pictures shown in this manual are for reference only, different model
and specifications are subject to real product.
3. System Connection
3.1 Usage Precautions
1) System should be installed in a clean environment and has a prop temperature and
humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated and
safe.
3) All devices should be connected before power on.
3.2 System Diagram
DVD
Rs2 32
c ontro l panel
PC
HD TV
DV Camera
PC
Laptop
MIC
Pr oje ctor
Receiver
Inhaltsverzeichnis
Andere Gentec Schalten Handbücher
