George Foreman GFMG700 Bedienungsanleitung
GEORGE FOREMAN
®
GFMG700
Instructions & Guarantee
Meat Mincer
Read the instructions before use and keep them safe. If you pass the meat mincer
on, make sure to pass on the instructions too. Remove all packaging, but keep
it till you’re satisfied the meat mincer is working.
important safeguards
When using electrical appliances, basic safety precautions should always be
followed including the following:
1. Read all instructions.
2. To protect against risk of electrical shock do not put meat mincer in
water or other liquid.
3. This appliance must only be used by a responsible adult.
4. Unplug the unit from the power supply when not in use, before putting
on or taking off parts, and before cleaning.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug after the
appliance malfunctions, or is dropped or damaged in any manner.
Return appliance to the nearest authorized service facility for examination,
repair or electrical or mechanical adjustment.
7. The use of attachments not recommended or sold by the manufacturer may
cause fire, electric shock or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter.
10.
11.
12.
13.
Keep hands, hair and utensils away from moving parts.
To avoid injury do not use fingers to remove food from cutting disk while
appliance is running.
Do not attempt to grind bones, nuts or other hard items. This may cause
permanent damage to your meat mincer.
Avoid contact with moving parts.
14. Never feed food by hand. Always use food pusher.
16. This product is designed for household use only.
17. This appliance is not intended for use by young children or infirmed persons.
18. This appliance is not a toy.
19. If the supply cord is damaged, it must be replaced by the manufacturer
or its service agent or a similarly qualified person in order to avoid hazard.
(Contact Salton Customer Service).
2
household use only
SAVE THESE INSTRUCTIONS
PARTS
A. Motor housing K. Cutting plate (medium)
B. On/Off/Reverse switch L. Cutting plate (fine)
C. Locking knob M. Screw ring
D. Grinder/Feeder head N. Sausage stuffer
E. Feeding tray O. Washer, plastic
F. Food pusher P. Washer, steel
G. Feeding tube Q. O-ring, black rubber
H. Feed screw R. Sausage separator
I. Cutting blade
J. Cutting plate (coarse)
A
BC
D
E
F
H
I
J
K
L
M
N
OPQ
R
G
3
4
ASSEMBLING THE MEAT MINCER
Before using, remove all packaging and wash all parts. (See the “How to Clean” section.)
HOW TO CLEAN
1.Unplug motor housing and remove parts. (Do not immerse motor housing.)
2.Wash all parts except motor housing in hot soapy water. Be very careful when
handling cutting blade.
1. Insert the Feed
Screw into the long
end of the spindle
first.
2. Position the Cutting
Blade onto the Feed Screw
with the flat cutting side
facing you.
3. Place the desired
Cutting Plate on the
Feed Screw over the
Cutting Blade, so that
notches of the plate
fit into the slots of
the grinder tube.
4. Attach the Screw Ring
to the end of the grinder
tube, turning clockwise
until tight.
5. Loosen the Locking
Knob on the side of
the Motor Housing.
Insert the Grinder
Head into the Motor
Housing opening.
Push the head in
until it is firmly
seated in the unit.
6. Secure the Grinder
Head by turning the
Locking Knob until tight.
7. Position the Feeding
Tray on the feeding tube.
3.Rinse the parts with clear hot water; dry thoroughly. Do not wash parts in a
dishwasher. The cutting blade and plates will rust if not dried and stored
properly. To protect these parts, dry then coat with cooking oil; wrap in
oil-proof paper before storing.
Tip: To protect from rust, vacuum package the parts using a Food Saver
vacuum packaging system.
4.Wipe motor housing with a damp cloth. Do not use harsh or abrasive cleaners.
HOW TO USE
1.Place the assembled grinder on a stable work surface so that the air vents on
the bottom and back remain unblocked.
2.Make sure the “ON/OFF” Switch is in the “OFF” position. Insert the plug
into the power socket.
3.Place a wide, shallow pan or plate beneath the grinder tube to catch the food.
4.Switch to the “ON” position. The grinder must always be “ON” before
adding the food.
5.Place the food in the feeding tray and use the Food Pusher to feed the food
one piece at a time down the tube.
6.After use, switch grinder to “OFF” and unplug from the wall.
7.Disassemble and clean all parts immediately after use.
NOTE: USING THE REVERSE SWITCH
If the motor slows or stops, this may be due to jammed food.Immediately switch
the grinder “OFF.” Press the “REVERSE” switch to push the food in the opposite
direction.Release the switch and turn the grinder “ON” again.If the grinder should
get jammed again, switch immediately to “OFF”, unplug, disassemble the grinder
head and clean the internal parts.
SELECTING CUTTING PLATES
Your George Foreman Meat Mincer set includes 3 cutting plates: FINE, MEDIUM and
COARSE. Experiment to choose the plate that best suits your tastes and recipes.
The following are suggested uses for each plate:
FINE: Use for ground meat for burgers or for making patés, spreads and
baby food.
MEDIUM: Use for ground meat used in making soups, stews or casseroles.
COARSE: Use for ground meat used for making chili and as sausage stuffer plate.
5
6
TIPS ON GRINDING
• Cut the food into strips or cubes slightly smaller than the opening on the
feeding tube.
• Make sure the food is free of bone or tough tendons before grinding.
• Raw meat or fish should be well chilled (not frozen) before grinding to
reduce the loss of juices.
• When grinding large quantities of meat, fats from the meat can build up in
the grinder tube, slowing down the grinding efficiency and slowing the
motor. If this happens, stop the grinder, disassemble, wash the parts in hot
water and reassemble.
FOOD SAFETY
• Keep raw meats and their juices away from other food. Wash your hands,
counters, and other surfaces in hot soapy water after handling raw meat.
Don’t let raw meat juices touch ready-to-eat foods.
• Freshly ground meat should be refrigerated and cooked within 48 hours.
Ground meats can be frozen up to 4 months.
MAKING SAUSAGES
You can make homemade sausages using the sausage stuffing attachment. All you
need is a batch of seasoned ground meat (see recipe book for ideas) and sausage
casings. You can purchase either natural or synthetic casings from your local meat
market. If purchased dry, soak in water for 1 hour, changing water several times to
remove salt; rinse thoroughly. Running water through the casings will indicate if
there are any holes in the casings.
TO ATTACH THE SAUSAGE STUFFER
1.Insert Feed Screw into Grinder Tube with the long end of the Spindle first.
2.Place Sausage Separator onto the Feed Screw.
3. Place the Sausage Stuffer through the Screw Ring. Attach the Screw Ring to
the end of the grinder tube, turning clockwise until tight.
4. Insert the Grinder Head into the Motor Unit opening and tighten Locking
Knob to secure.
TO STUFF CASINGS
1. Cut the casing into 1 metre lengths.
2. Pull and gather casing over the end of stuffer
attachment, leaving 3 or 4 inches overhanging
the end of the attachment.
3. Place the seasoned meat in the Feeding Tray,
turn the unit “ON” and push the meat into the
opening using the Food Pusher.
4. As the casing begins to fill, tie a knot in the loose end, and continue to stuff
loosely. If air bubbles appear while stuffing, prick casing with a pin to allow
air to escape.
5. Twist casings into desired link size and shape as the meat fills it.
6. When almost filled, turn the unit “OFF”, remove the casing from the
sausage attachment and tie a knot in the open end.
7
8
This product is guaranteed for a period of 1 year from date of purchase,
against defects in material and workmanship. It is particularly important that
the purchaser carefully read the instructions provided in order to get maximum
use from this product.
This guarantee is only valid if the appliance is used solely for domestic
purposes in accordance with the instructions and provided it is not connected
to an unsuitable electricity supply or dismantled or interfered with in any way
or damaged through dropping or misuse. Under this guarantee we undertake
to repair or replace free of charge any parts found to be defective.
Nothing in this guarantee or the instructions relating to the product excludes,
restricts or otherwise affects your statutory right.
In line with our policy of continuous product development we reserve the right
to change the product, packaging and documentation specifications without
notice.
This product conforms to Radio Frequency Interference requirements
230-240V 50Hz AC Only
GUARANTEE
0306
Inhaltsverzeichnis
Andere George Foreman Küchengerät Handbücher
George Foreman
George Foreman SKG01GFB Montageanleitung
George Foreman
George Foreman GR59A Baby George Bedienungsanleitung
George Foreman
George Foreman Smart Kitchen Montageanleitung
George Foreman
George Foreman Smart kitchen RC0995PQ Montageanleitung
George Foreman
George Foreman Baby George GR59ACAN Bedienungsanleitung
George Foreman
George Foreman GR82B george Jr. Bedienungsanleitung
George Foreman
George Foreman 14181 Bedienungsanleitung
George Foreman
George Foreman GFQ001 Montageanleitung
George Foreman
George Foreman GV6B Bedienungsanleitung
George Foreman
George Foreman GFMC14 Installationsanleitung
George Foreman
George Foreman GV12 Bedienungsanleitung
George Foreman
George Foreman GF3TSBLK Bedienungsanleitung
George Foreman
George Foreman CYCLO CHEF GFAF5000 Bedienungsanleitung
George Foreman
George Foreman GFPC1 Installationsanleitung
George Foreman
George Foreman GR82 George Jr. Bedienungsanleitung
George Foreman
George Foreman GFVS1000 Bedienungsanleitung
George Foreman
George Foreman GV5 Bedienungsanleitung
George Foreman
George Foreman GR82 George Jr. Bedienungsanleitung
George Foreman
George Foreman Smart kitchen RC0010B Montageanleitung
George Foreman
George Foreman Rapid Grill Series Installationsanleitung
