GeoVision GV-Tower System V2 Bedienungsanleitung
RoHS
2021/05
English
TowerV2D-QG-A
© 2021GeoVision, Inc. All rights reserved.
Thank you for purchasing GV-Tower System V2 (Rev. D). This guide is designed to assist the new user in
getting immediate results from the GV-Tower System V2 (Rev. D). For advanced information on how to use the
GV-Tower System V2 (Rev. D), please refer to GV-Tower System V2 (Rev. D)User's Manual.
Quick Start Guide
The Vision of Security
GV-Tower System V2 (Rev. D)
© 2021 GeoVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part, without the
written consent of GeoVision.
Every effort has been made to ensure that the information in this manual is accurate.
GeoVision, Inc. makes no expressed or implied warranty of any kind and assumes no
responsibility for errors or omissions. No liability is assumed for incidental or consequential
damages arising from the use of the information or products contained herein. Features and
specifications are subject to change without notice.
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: +886-2-8797-8377
Fax: +886-2-8797-8335
http://www.geovision.com.tw
Trademarks used in this manual: GeoVision, the GeoVision logo and GV series products are
trademarks of GeoVision, Inc. Windows and 64-bit Windows 10 IoT Enterprise are registered
trademarks of Microsoft Corporation.
May 2021
1
Contents
1. Introduction.................................................................................................................. 2
1.1Packing List ............................................................................................................. 2
1.2Recommend Hard Drive........................................................................................... 2
1.3Front View & Rear View........................................................................................... 3
1.4Basic Installation ..................................................................................................... 5
2. Install the Hard Drive.................................................................................................. 7
3. Turn On the Power....................................................................................................... 9
3.1Windows Setup Installation ..................................................................................... 9
4. GV-Tower NVR System V2 (Rev. D)..........................................................................11
4.1Main Screen............................................................................................................11
4.1.1Adding Hot Swap Drive to Recording Path ..........................................................12
4.1.2Adding IP Video Devices .....................................................................................14
4.1.3Renaming the Camera.........................................................................................16
4.1.4Choosing Recording Mode...................................................................................17
4.1.5Changing Recording Resolution...........................................................................18
4.2Setting Up a Recording Schedule............................................................................19
4.3Playing Back Video .................................................................................................20
4.4Backing Up Video Files............................................................................................22
5. GV-Tower VMS System V2 (Rev. D)..........................................................................24
5.1Main Screen............................................................................................................24
5.1.1Adding Hot Swap Drive to Recording Path ..........................................................25
5.1.2Adding IP Cameras to GV-VMS............................................................................26
5.2Configuring Camera Settings..................................................................................28
5.3Playing Back Recorded Videos................................................................................29
5.4Backing Up Recorded Videos ..................................................................................31
6. Restore System............................................................................................................32
2
1. Introduction
Welcome to GV-Tower System V2 (Rev. D) Quick Start Guide. In the following sections, you
will learn about the basic installations and configurations of the system. For details, see
User’s Manual (C:\UserManual).
1.1 Packing List
GV-Tower NVR / VMS System V2 (Rev. D) x 1
Key for Hard Disk Safety Lock x 2
Hard Disk Drive Screw x 16
AC Power Cord x 1
Documents Download Guide x 1
1.2 Recommend Hard Drive
For system efficiency, we recommend the following enterprise level hard disk drives. Avoid
using desktop level or green HDD which may affect system efficiency. For details, see
Appendix D. Certified Hard Disk Drive, User’s Manual.
Seagate Enterprise Series
WD Gold Level Series
WD Ultrastar Series
3
1.3 Front View & Rear View
Front View
12
3
4
5
6
7
No. Name No. Name
1. 3.5” HDD Tray x 4 5. Not Functional
2. Power Button 6. Reset Button
3. Power LED (Blue) 7. USB (3.2 Gen 1) Port x 2
4. HDD Activity LED (Red)
4
Rear View
1
2
3
5
6
7
9
84
Figure 2-2
No. Name No. Name
1. Power Connector 6. USB 3.2 Port x 2
2.
Audio Jack x 3
Line In (Blue)
Line Out / Front Speaker Out
(Green)
Mic In (Pink)
7. PS/2 keyboard / mouse port
3. Not functional 8. DisplayPort x 1
4. USB 2.0 Port x 2 9. HDMI Port x 1
5. Ethernet Port x 1
5
1.4 Basic Installation
Here we use GV-Tower NVR System V2 (Rev. D) as the example.
1. Connect an HDTV to GV-Tower NVR/VMS System V2 (Rev. D) using the HDMI /
DisplayPort cable supplied by the HDTV manufacturer.
2. Using the RJ-45 cable, connect one end to the Ethernet port and the other end to
Network.
3. Connect speakers to the Audio Line Out port.
4. Connect the mouse and keyboard to the USB port (either USB 2.0 or USB 3.2 port) or the
PS/2 mouse / keyboard port.
5. Using the supplied power cord, connect one end to the AC input and the other end to the
power outlet.
Once the above hardware is properly connected, press the Power button on the front panel
to start the system. It takes about 1 minute for startup. The system should load automatically
and display cameras in the main screen.
6
Using the IR Remote Control
The optional GV-IR Remote Control provides easy control of GV-Tower NVR/VMS System
V2 (Rev. D). Its receiver should be plugged into any USB ports of the system.
For details, see GV-IR Remote Control User’s Manual (C:\UserManual).
7
2. Install the Hard Drive
GV-Tower NVR/VMS System V2 (Rev. D) uses SATA hard drives for video and audio data
storage. Before recording, ensure to install your hard drives. Follow the below steps to install
the hard drive.
1. Press the release latch. The drawer handle pops up.
2. Pull out the drive drawer.
3. Remove the plastic carrier from the chassis.
Release Latch
8
4. Insert the hard drive in the drawer.
5. Secure the hard drive with the 4 screws, and make sure all screw heads flush with the
surface.
6. Put the drawer back in the drive bay of GV-Tower NVR/VMS System V2 (Rev. D), and
push the latch until it locks.
7. When the Power LED on the drawer shines blue, the hard drive is now ready to use.
To format the hard drive, see 3.4 Formatting the Hard Drive in GV-Tower System V2
(Rev. D) User’s Manual (C:\UserManual).
To add the hard drive to the recording path, see 3.5 Adding the Hard Drive to the
Recording Path in GV-Tower System V2 (Rev. D) User’s Manual (C:\UserManual).
Inhaltsverzeichnis
Andere GeoVision Lagerung Handbücher
Beliebte Lagerung Handbücher anderer Marken
Spectra Logic
Spectra Logic T-Series Spectra T50e Bedienungsanleitung
Panasonic
Panasonic LKM-F931-1 Bedienungsanleitung
Tabernus
Tabernus Enterprise Erase E2400 Bedienungsanleitung
Rocstor
Rocstor COMMANDER 3F series Bedienungsanleitung
HP
HP P9000 Bedienungsanleitung
Western Digital
Western Digital Ultrastar Data60 Bedienungsanleitung