Gerber Technology GERBERplotter XLp Series Stücklistenhandbuch
________________________________________________
i
Copyright Notice
Copyright © 2010 by Gerber Technology, a Business Unit of Gerber
Scientific International, Inc. All rights reserved. This document may not
be reproduced by any means, in whole or in part, without the written
permission of the copyright owner. This document is part of the
proprietary articles furnished to document the GERBERplotter™ XLp
Series.
In consideration of the furnishing of the information contained in this
document, the party to whom it is given assumes control and custody
and agrees to the following:
• The information contained herein is given in confidence and any
part thereof shall not be copied or reproduced without the
written consent of Gerber Technology.
• This document or the contents herein under no circumstances
shall be used in the manufacture or reproduction of the articles
shown and the delivery shall not constitute any right or license
to do so.
The information in this document is subject to change without notice.
Gerber Technology, its subsidiaries and affiliates shall not be liable
for errors in this documentation or for incidental or consequential
damages in connection with furnishing, or use of this material
including, for example, loss of profits, fabric, and production time.
AccuMark®is a registered trademark of Gerber Technology in the
United States, all rights reserved. XLp™, WinPlot™ and
GERBERplotter™ are trademarks of Gerber Technology in the United
States, all rights reserved. Other company names, brand names, and
product names mentioned in this book are trademarks or registered
trademarks of their respective companies.
Corporate headquarters:
Gerber Technology
24 Industrial Park Road West
Tolland, CT 06084 USA
Telephone 860.871.8082
Manufacturer address:
Gerber Technology, A Business Unit of
Gerber Scientific International, Inc.
99 Tian Zhou Road
Floors 1 and 2
Caohejing Hi-Tech Park, Building 16
Shanghai, China 200233
Telephone: +86 (21) 5445.0505
94134002 10/10, Rev. D
________________________________________________
ii
English
Table of Contents
Customer Support........................................................................1
Safety Instructions........................................................................3
Hardware Installation ...................................................................7
Software Overview.....................................................................21
WinPlot Installation.....................................................................21
XLp Interface Software Installation............................................22
Calibration Procedures...............................................................38
Complete a Test Plot on the GERBERplotter XLp Series .........42
Appendix ....................................................................................46
Troubleshooting .........................................................................46
Machine Specifications ..............................................................47
Glossary.....................................................................................48
________________________________________________
iii
English
Table of Figures
Figure 1. WEEE label............................................................................. 2
Figure 2. GERBERplotter XLp Series ....................................................5
Figure 3. Control Panel..........................................................................6
Figure 4. Crate contents.........................................................................7
Figure 5. Component Box......................................................................8
Figure 6. Right Side Column removed and balanced.............................9
Figure 7. Attaching Crossbeam to Right Side Column...........................9
Figure 8. Two screws attaching Head Unit and Crossbeam ................ 10
Figure 9. Feed Motor Cable inside the Right Side Column ..................10
Figure 10. USB Cable.......................................................................... 11
Figure 11. Rubber stop on Left Side .................................................... 12
Figure 12. Power cord..........................................................................15
Figure 13. Paper roll and components................................................. 16
Figure 14. Paper on Feed Roll Bar with Mandrel .................................16
Figure 15. Paper fed through the Nip Bar and Pinch Rollers ...............17
Figure 16. Feeding paper toward front of plotter..................................18
Figure 17. Paper fed through plotter ....................................................18
Figure 18. Plotter with paper installed..................................................19
Figure 19. Installed Inkjet Cartridges (XLp95)......................................20
Figure 20. WinPlot Installation screen..................................................21
Figure 21. XLp Interface Installation screen......................................... 22
Figure 22. Gerber Device Configuration...............................................23
Figure 23. XLp Interface Icon............................................................... 31
Figure 24. Machine Setting window, Plot tab .......................................32
Figure 25. Machine Setting window, Ink tab.........................................33
Figure 26. Machine Setting window, Paper tab.................................... 34
Figure 27. Machine Setting window, System tab .................................35
Figure 28. Machine Setting window, Communication tab.....................36
Figure 29. Machine Setting window, Calibration tab ............................ 37
Figure 30. Machine Setting window, MISC tab .................................... 38
Figure 31. X Gap calibration ................................................................38
Figure 32. Cartridge Overlap calibration ..............................................39
Figure 33. Y Head calibration............................................................... 39
Figure 34. Y Gap calibration ................................................................40
Figure 35. XLp Interface Icon............................................................... 42
Figure 36. WinPlot screen....................................................................43
Figure 37. Choose files to plot window................................................. 44
Figure 38. WinPlot box......................................................................... 45
Table 1. Safety labels.............................................................................3
Table 2. Supplies and part numbers ....................................................46
Table 3. Troubleshooting ..................................................................... 46
Table 4. Machine specifications...........................................................47
________________________________________________
1
English
Introduction
The GERBERplotter XLp Series plotters are ideal for plotting in an ultra
wide format yet are small enough to fit into any design or pattern making
area. These compact upright plotters are quiet, easy to install, use
minimal floor space and can be conveniently set against a wall.
The XLp Series inkjet plotters are easy to use, wide format, inkjet
plotters with high reliability, accuracy, and low operational costs. They
are compatible with all Gerber products and they offer a Windows based
graphical interface for intuitive control and status messaging.
Customer Support
Contact the Regional Customer Solution Center with support or
technical questions.
Write the specified information on the blanks below to have it available
when calling:
Regional Customer Solution
Center phone number ____________________________
Sales order number ____________________________
Purchase date ____________________________
Product name and type GERBERplotter XLp Series ________
Optional equipment used ____________________________
Software ____________________________
(include version number)
Description of problem(s) & Exact wording of Computer or Display
Screen error message(s)
Customer Solution Centers
Gerber’s worldwide Customer Solution Centers are staffed by multi-
lingual, trained experts at all hours. To find a local Customer Solution
Center, visit www.gerbertechnology.com/default.asp?contentID=266.
________________________________________________
2
English
Advanced Technology Centers
Gerber's Advanced Technology Centers are dynamic hubs for product
demonstrations, software testing, system training, engineering and R&D
activities.
North America
Phone: 1.800.826.3243 (toll free in USA)
1.860.871.8082 (outside USA)
1.866.796.8570 Spanish
China
Phone: +86 (21) 5445.0505
Europe
Phone: +32 (2) 716.0311
Vietnam
Phone: +84 (8) 984.7080
Waste Electrical and Electronic Equipment
(WEEE) Attention European Union Member States!
All Gerber equipment is labeled as required by the Waste Electrical and
Electronic Equipment (WEEE) Directive 2002/96/EC for products placed
on the market after August 13, 2005. The WEEE Directive mandates the
collection and treatment of electrical and electronic equipment at end of
life. Refer to the Directive’s specific regional requirements.
Figure 1. WEEE label
________________________________________________
3
English
Safety Instructions
Read and understand all Safety Instructions before operating the
GERBERplotter to prevent personal injury, death, or equipment
damage.
Safety Labels
The Safety Labels in Table 1 are located at various parts of the
GERBERplotter.
Symbol Description
Electrical ground to
frame
Sharp Edge
Do Not Touch
Codestrip
Table 1. Safety labels
Warnings and Cautions
Warnings and cautions precede some steps or procedures. Always
follow these precautions to prevent personal injury or equipment
damage.
•Warnings are put before procedures that could result in
personal injury, death, or equipment damage.
•Cautions are put before procedures that could result in
equipment damage.
Dangerous Procedures
Always follow warnings and cautions. Follow all other necessary safety
instructions to ensure safe equipment operation in its operating location.
Do No Maintenance Alone
Do not perform equipment maintenance alone. Make sure another
person is present who can administer emergency first aid.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Sprachen:
