Gerber EDGE FX Bedienungsanleitung

Edge FX Lubrication

What: Lubrication of the cassette carriage, cassette pins, Z-axis lead screw, etc.

Why: Chattering noise that occurs when the cassette carriage moves down and up.

This can also lead to color to color registration problems.

What you will need:

•2.5mm Allen Wrench

•3mm Long Allen Wrench (Ball end is best)

•Synthetic Grease

•3 in 1 Oil

•Cleaning Swabs (Fingers will do, but I don’t recommend it.)

How: Throughout this procedure, you will be raising and lowering the cassette

carriage. To do so, follow these simple instructions. (This takes you into menus and

functions that can adversely affect print quality. Do not press any buttons that are

not specifically mentioned in these instructions.)

•Make sure the Edge is Offline

•Press F2 + F4 at the same time to enter the Manufacturing Menu

•Press Next 3 times to get to Manufacturing Menu 4

•Press F1 (Z-Axis)

•Press the < (left slew button) to lower the cassette carriage and > (right slew

button) to raise it.

•When you are finished, press F3 to cancel out of the Manufacturing Menu.

Now, on to the good stuff –

1. Remove the foil caddy

2. Raise the cover

3. Using the instructions above, lower and raise the cassette carriage a few times

to identify the points that rub or slide against. You will probably notice more

“chatter” when the carriage is moving back up. Leave the carriage in the up

position.

4. Remove the covers:

a. Using the 3mm Allen Wrench, remove

the three screws holding in the black

cover around the caddy slot. (Note

that the longer one goes in the

bottom when you put it back

together.)

b. Using the 2.5mm Allen Wrench,

remove the two round head screws

from the back, top cover.

TechSupportHotline: 888-336-8323

c. Open the lid and using the 3mm long handled Allen Wrench, remove the

screws indicated in the pictures below. The right side will be the

hardest one to reach – this is where the long handle and ball end really

come in handy – especially when you go to put the cover back on.

5. With the covers off and the lid down,

look down at the top and you’ll see the

Z-axis lead screw and lead screw nut.

As you press the slew keys you’ll see

the lead screw turn which raises and

lowers the printhead and carriage

assembly. Make sure that you do not

run the printhead down into the platen

– damage to the printhead can occur.

Using a cleaning swab, apply a small amount of synthetic grease along the

exposed length of the lead screw, then using the slew keys, run the lead screw

back and forth a few times to spread the grease.

6. Now lift up the lid and apply synthetic grease (sparingly) to the friction points

on the carriage

assembly.

7. With the cassette carriage in the down

position, the foil pins are exposed. Put one

drop of 3 in 1 oil on each pin.

8. Run the carriage up and down at least 10

times (with the cover open) to distribute the

grease and oil.

9. Replace the covers and you’re back in

business.

Please call if you have any questions.

TechSupportHotline: 888-336-8323

Andere Handbücher für EDGE FX

Inhaltsverzeichnis

Andere Gerber Drucker Handbücher

Gerber

Gerber EDGE FX Bedienungsanleitung

Gerber

Gerber ODYSSEY XP Bedienungsanleitung

Gerber

Gerber P2C 600 Bedienungsanleitung

Gerber

Gerber Jetster Bedienungsanleitung

Gerber

Gerber Solara ion Bedienungsanleitung

Gerber

Gerber MAXX 2 Bedienungsanleitung

Gerber

Gerber EDGE 2 Bedienungsanleitung

Gerber

Gerber SOLARA UV2 Bedienungsanleitung

Gerber

Gerber InkJet Printer Bedienungsanleitung

Gerber

Gerber P2C 1200 Bedienungsanleitung

Gerber

Gerber EmbossTrack series Bedienungsanleitung

Gerber

Gerber Edge Bedienungsanleitung

Gerber

Gerber EDGE FX Bedienungsanleitung

Gerber

Gerber HS750 Plus Bedienungsanleitung

Gerber

Gerber enVision Bedienungsanleitung

Gerber

Gerber HS15 Plus Bedienungsanleitung

Gerber

Gerber P2C 1600 Bedienungsanleitung

Gerber

Gerber Edge Bedienungsanleitung

Gerber

Gerber Sabre Bedienungsanleitung

Gerber

Gerber P2C 1200 Bedienungsanleitung

Gerber

Gerber Signmaker IVB Bedienungsanleitung

Gerber

Gerber GS750 Plus Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung