Gevi GECMA082T-U Bedienungsanleitung
IMPORTANT SAFEGUARDS
When using electrical appliances, basic precautions should always
be followed, including the following:
-
1.
2.
3.
4.
5.
6.
7.
Read all instructions.
Make sure that your outlet voltage corresponds to the
voltage stated on the rating label of the coffee maker.
To protect against fire, electric shock and injury to
persons do not immerse cord, plug, or in water or other
liquid.
Close supervision is necessary when any appliance is used
by or near children.
Unplug from outlet when not in use and before cleaning.
Allow to cooling before putting on or taking off parts, and
before cleaning the appliance.
Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions, or has been
damaged in any manner. Return appliance to an
authorized service facility for examination, repair or
adjustment.
The use of accessory not recommended by the appliance
manufacturer may result in fire, electric shock or injury to
Dear Gevi customer
Gevi have focused on creating perfect home appliance for
our customer. In the past years, it took us time, lots of
research and many prototypes to achieve our goal. We
would like to give you a perfect using experience.
Thanks for purchasing our Gevi products. If have any
questions for our products , please kindly contact our Gevi
service team via email: geviservic[email protected]om.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
persons.
Do not use outdoors.
Do not let cord hang over edge of table or counter, or
touch hot surface.
Do not place on or near a hot gas or electric burner, or in a
heated oven.
Do not use appliance for other than intended use.
The container is designed for use with this appliance. It
must never be used on a range top.
Do not clean container with cleansers, steel wool pads, or
other abrasive material.
To disconnect, turn any control to “Off”, remove plug
from wall outlet. Always hold the plug. But never pull the
cord.
Scalding may occur if the cover is removed during the
brewing cycles. Be careful not to get burned by the steam.
Some parts of appliance are hot when operated, so do not
touch with hand. Use handles or knobs only.
Never leave the empty carafe on the keeping warm plate
otherwise the carafe is liable to crack.
Never use the appliance if the carafe shows any signs of
cracks or carafe having a loose or weakened handle. Only
use the carafe with this appliance. Use carefully as the
19.
20.
21.
22.
23.
carafe is very fragile.
This appliance is not intended for used by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliances by a person responsible
for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
Do not set a hot container on a hot or cold surface.
Do not let the coffee maker operate without water.
Save these instructions.
HOUSEHOLD USE ONLY
USING YOUR COFFEE MAKER
KNOW YOUR COFFEE MAKER BEFORE FIRST USE
CONTROL PANEL
Filter
Funnel
Carafe lid
Carafe
Top cover
Water tank
Water gauge
Control panel
(see below)
Top cover
Check that all accessories are complete and the unit is not
damaged. Add water into water tank to the max level and brew
water for several times without coffee powder, then discard
the water. Clean all detachable parts thoroughly with warm
water.
1.
2.
3.
4.
5.
6.
Open the top lid and fill the water tank with drinking
water. The water level should not exceed the maximum
level marked in water gauge.
Place the funnel into the funnel support and make sure
the funnel is assembled correctly. Then put the filter
correctly.
Add coffee powder into filter. Usually a cup of coffee need
a level spoon of coffee powder, but you may adjust
according to personal taste. Then close the top lid.
Place the carafe on the keeping warm plate.
Plug the power cord into the outlet. The LCD will display
“12:00” and the colon will flash.
Press POWER button once, the indicator in it will be
illuminated blue. The appliance will begin working.
AUTOMATIC START FUNCTION
7.
8.
9.
10.
The brewing process can be interrupted by pressing the
POWER button once at any time during operation. The
appliance will continue brewing once POWER is pressed
again.
Note: You can take out the jug, pour and serve at any time.
The appliance will stop dripping automatically. But the
time cannot exceed 30 seconds.
Remove out carafe to serve when finish brewing (about
one minute later after the coffee stops dripping out.)
Note: the coffee you get will less than the water you have
added, as some water is absorbed by coffee ground.
When the process is finished, if you do not want to serve
immediately, keep the coffee maker is energized, the
coffee can be kept warm in the keeping warm plate. The
appliance will be cut off power automatically after 2 hour
if it has not been manually disconnected at the
completion of brewing. For an optimum coffee taste,
serve it just after brewing.
Always turn the coffee maker off and disconnect the
power supply when not use.
Caution: When pour coffee, the momentary inclined angle
of carafe shall not be more than 45 degree from the
vertical position, you shall pour the coffee slowly until the
carafe is empty, otherwise the coffee in the carafe will
rush to the bottom of carafe lid, and the coffee will flow
out from two edges of lid and hurt person!
If you do not want the coffee maker to start operation immedi-
ately, for example now it is 5:10 pm, you hope that the coffee
maker will automatically start at 8:15 in the evening, first
follow steps 1 to 5 of above section, then you can set the auto-
matic start function as follows:
1.
2.
Press BREW or WARM button for more
than 5s, the current delayed time is
showed on display.
Press the BREW and WARM button
continuously to set the present time
(real clock), that is 17:10 (See fig. 1).
Note: the time cycle is 24 hours.
MEMORY
CLEANING AND MAINTENANCE
1.
2.
CAUTION: CAUTION: Be sure to unplug this appliance before
cleaning. To protect against electrical shock, do not immerse
cord, plug or unit in water or liquid. After each use, always
make sure plug is first removed from wall outlet.
Clean all detachable parts after each use in hot, sudsy water.
Wipe the product’s exterior surface with a soft, damp cloth
to remove stains.
If the power supply has been broken off or unplug the power
cord unintentionally during operation, the appliance will be
continued previous operation automatically from the point
when the disconnection occurred provided that the pause does
not exceed 10s, even without pressing any button. In the event
the pause time exceeds 10s, the display shows the default
setting, the appliance must be re-started.
3.
4.
5.
6.
Press PROG button for more than 5s and the word auto
shows on down-left corner of display.
Set the delayed starting time by pressing BREW and WARM
button repetitively, that is 20:15 (see Fig. 2).
After setting the presetting time, press the PROG button，
buzzle will sound “beep” once, the LCD will display
“auto” and delayed time then enter the delay
function。
Make sure enter delay function state, press PROG button
once, the LCD will display “auto” and delayed time.
Note: You may cancel the automatic start function by
pressing POWER button once to stop machine, if you want
to brew coffee again immediately, you shall press POWER
button once again to start brewing immediately. If you
want to change the automatic start time, only following
the above 1-5 steps again.
When the time is due the indicator in POWER will
illuminate blue and keep on, then the unit starts brewing.
The appliance will be cut off power automatically after 40
minutes if it has not been manually disconnected at the
completion of brewing.
REMOVING MINERAL DEPOSITS
HINTS FOR GREAT-TASTING COFFEE
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
1.
Water droplets may buildup in the area above the funnel and
drip onto the product base during brewing. To control the
dripping, wipe off the area with a clean, dry cloth after each
use of the product.
Use a damp cloth to gently wipe the keeping warm plate.
Never use abrasive cleaner to clean it.
Replace all parts and keep for next use.
To keep your coffee maker operating efficiently, you should
clean away the mineral deposits left by the water regularly
according to the water quality in your area and the frequen-
cy use the appliance, the detail is as follows:
Fill the water tank with water and descaler to the maxi-
mum level in the gauge of coffee maker (the scale of water
and descaler is 4:1, the detail refers to the instruction of
descaler. Please use “household descaler”, you can use
the citric acid instead of the descaler (the one hundred
parts of water and three parts of citric acid).
Place the carafe on the keeping warm plate, pay attention
to let center line of carage aligns with that of brew basket.
Press the POWER button once and the indicator in it will be
illuminated blue. After a while, water will drop out
automatically.
After percolate the equivalent of one cup and then switch
off the appliance by pressing the POWER button twice. The
indicator in it will be illuminated blue and will be
extinguished.
Leave the solution work for 15 minutes, repeat the steps of
3-5 again.
Turn the appliance on by pressing the POWER button once
and run off the water until the water tank is completely
empty.
Rinse by operating the appliance with water at least 3
times.
A clean coffee maker is essential for making great-tasting
coffee. Regularly clean the coffee maker as specified in the
“CLEANING AND MAINTENANCE” section. Always
2.
3.
4.
5.
6.
use fresh, cold water in the coffee maker.
Store unused coffee powder in a cool, dry place. After
opening a package of coffee powder, reseal it tightly and
store it in a refrigerator to maintain its freshness.
For an optimum coffee taste, buy whole coffee beans and
finely grind them just before brewing.
Do not reuse coffee powder since this will greatly reduce
the coffee’ flavor. Reheating coffee is not recommended
as coffee is at its peak flavor immediately after brewing.
Clean the coffee maker when over-extraction causes
oiliness. Small oil droplets on the surface of brewed, black
coffee are due to the extraction of oil from the coffee
powder.
Oiliness may occur more frequently if heavily roasted
coffees are used.
Inhaltsverzeichnis
Andere Gevi Kaffeemaschine Handbücher
Gevi
Gevi GECME003D-U Bedienungsanleitung
Gevi
Gevi GECMA025A-U Bedienungsanleitung
Gevi
Gevi GECMA052DA-U Bedienungsanleitung
Gevi
Gevi GECMA068-U Bedienungsanleitung
Gevi
Gevi GECME022-U Bedienungsanleitung
Gevi
Gevi GECMD008-U Bedienungsanleitung
Gevi
Gevi GECMD627BK-U Bedienungsanleitung
Gevi
Gevi GECME403-U Bedienungsanleitung
Gevi
Gevi GECMA025AK-U Bedienungsanleitung
Gevi
Gevi GECME403L-U Bedienungsanleitung
Gevi
Gevi GECMD627BK-U Bedienungsanleitung
Gevi
Gevi GECMD276-U Bedienungsanleitung
Gevi
Gevi GECMA025A-U Bedienungsanleitung
Gevi
Gevi GECME400BA-U Bedienungsanleitung
Gevi
Gevi GECME403-U Bedienungsanleitung
Gevi
Gevi CM7015-NM Bedienungsanleitung
Gevi
Gevi GECME020DE-U Bedienungsanleitung
Gevi
Gevi GECMA160A-U Bedienungsanleitung
Gevi
Gevi GECME418E-U Bedienungsanleitung
Gevi
Gevi GECMA025AK-U Bedienungsanleitung
