GFA TS 971 Series Produkthandbuch

IMPORTANT

In accordance with EN12453 self-checking or self-testing safety edge or a device

certified as type ‘E’ according to EN12453 i.e. light curtain fitted directly in line

with the moving leaf of the door must be fitted to doors that close by impulse

remote or automatic activation.

In addition doors operated by untrained users in public areas activated by

impulse out of sight of the door or automatic control must be fitted with a photo

beam or photo beams to detect persons or obstacles standing on the floor to one

side of the door.

The photo beams do not need to be self-checking or self-testing but they should

be subject to periodic checks at intervals not exceeding six months.

Grilles and doors that have hand or foot holds that can be used to ride on the

door must be fitted with devices to protect against trapping i.e. Raytector

Entrapment Protection Barrier that when obstructed stops all movement of the

door.

Note

A Maintenance Cycle Counter is included in the TS 971. (See Control

Progra ing 8.5 and 8.6)

When co issioning the Shutter set the Counter according to the Shutter

Manufacturers reco endations.

08.2018

TS 971-

Industrial

Door Control

Connection Drawings

INSTRUCTIONS

The anufacturer’s instruction

booklet supplied with the TS 971

contains i portant directions

and warnings for the safe use of

this equip ent and should be

read before installation or

co issioning is undertaken.

TS 971 Industrial Door Control

Contents

TS 971 - Connection of the drive unit to the Control Panel 4

TS 971 - Main Supply – 3 Phase for 3 Phase Door Drives 5

TS 971 - Main Supply – 1 Phase for 1 Phase Door Drives 6

Safety Brake – Drive Connection 7

TS 971 - KSR4P – Optical Safety Edge 8

TS 971 - KSR6 – Wireless Optical Safety Edge 9

TS 971 – GF304528 Raytector High Level Entrapment Protection Barrier 10

TS 971 – ELC1930/OSE ELC2290/OSE ELC2650/OSE Light Curtain. 11

TS 971 – GF/RAY-LG2520/OSE GF/RAY-LG2524/OSE Light Curtain. 12

TS 971 – 2 x GF/RAY Light Curtains 13

TS 971 – Connecting an additional ‘OPEN / CLOSE’ Key Switch. 14

TS 971 - GE3 or GE3AN – Connecting an additional 3 Push Button Station. 15

TS 971 – Connecting an additional Key Switch with Stop Button. 16

TS 971 - PES/9R– Connecting a Reflective Photo Beam. 17

TS 971 - PES/30T– Connecting a Thru Beam Photo Beam. 18

TS 971 - Built-in Radio Receiver - memorising Radio Transmitters 19

TS 971 – Loop Detector PCB and Ground Loop 20

TS 971 – Latching Stop Button 21

TS 971 - IFALCONXL and IFALCON – Industrial Motion Sensor 22

TS 971 - ICONDORXL and ICONDOR – Industrial Motion & Presence Sensor 23

TS 971 - Power Supply for Control Accessories 24

TS 971 - 230VAC Warning Light 25

TS 971 - GE301955 - Red & Green Traffic Indicator 26

TS 971 – Interlocking 2 x TS971s Together 27

TS 971 Industrial Door Control

TS 971 - General Layout of Drive and Controls

SAFETY EDGE KIT KSR4P

PHOTO BEAM PES/9R OR PES/30T

DOOR CENTRE LINE

GE3A /

GE3AN

3 PUSH

BUTTON

STATION

SAFETY BRAKE (IF FITTED)

WIRELESS SAFETY EDGE KIT KSR6

I pulse

activation by

trained users

in full view of

the door.

Untrained

users,

activated by

i pulse out

of sight of

the door in

public areas

or auto atic

control

TS 971 Industrial Door Control

TS 971 - Connection of the drive unit to the Control Panel

The Motor / Limit protected cable is available in 3m 5m 7m 9m 13m and custom lengths up to

25m. The Motor / Limit cable must not exceed 25m.

Fig 2

F1 ,6A t

1.11.21.31.4

PIN Wire-No. Description

1 3 Phase W

2 2 Phase V

3 1 Phase U

4 4 Neutral

5PE Earth

PIN Wire-No. Description

1 5 Safety Chain 24V DC

26 RS485 B

3 7 GND

4 8 RS485 A

5 9 Safety Chain

6 10 8V DC

DIGITAL

LIMIT ASSEMBLY

[4]

[3]

[E]

[2]

[1]

MOTOR PLUG

TS 971 Industrial Door Control

TS 971 - Main Supply – 3 Phase for 3 Phase Door Drives

Fig 3a

The neutral is only required for FI drives or if 1~ 230VAC control accessories or indicator lamps are installed.

F1 = 1 6A t

1.11.21.31.4

L1L2L3 N E

L1 – Black

L2 – Brown

L3 – Grey

N – Blue

E – Green/Yellow

TS 971 Industrial Door Control

TS 971 - Main Supply – 1 Phase for 1 Phase Door Drives

There are two types of single-phase motors symmetric and asymmetric windings. To determine

how to connect the supply look at the motor connecting plug in the motor limit housing.

SYMMETRIC WINDING ASYMMETRIC WINDING

(Ranger Safedrive Mini and FI Drives) (Safedrive)

Fig 3b

UZ2

1 ~

Z1UZ2U1PE

N U2

1 ~

U1Z2 Z1

NB.

NO CONNECTION

NB.

CONNECTION

F1 = 1 6A t

1.11.2 1.3 1.4

L1 N E

F1 = 1 6A t

1.11.21.31.4

L1 N E

TS 971 Industrial Door Control

Safety Brake – Drive Connection

S10

MOTOR

THERMAL

EMERGENCY

OPERATOR

SAFETY BRAKE

INTERLOCK

GN/W (N/C)

SAFETY BRAKE

REMOVE LINK TO

CONNECT SAFETY BRAKE

10 9 8

765

DIGITAL LIMIT

TS 971 Industrial Door Control

TS 971 - KSR4P – Optical Safety Edge

Fig 4a

4 WH

3 GRN

2 YEL

1 BRN

SK/w

SK/g

SK/b

ST+

2 x WHITE

2 x GREEN

2 x BROWN

1 BROWN

3 GREEN 2 YELLOW

4 WHITE

2.1

2.2

2.3

2.4

2.5

SHUTTER CENTRE LINE

SHOOT BOLT,

PASS DOOR OR

SLACK WIRE SWITCH

REMOVE LINK IF

CONNECTING SHOOT

BOLT, PASS DOOR OR

SLACK WIRE SWITCH

RECEIVEREMITTER

2.5

2.4

2.3

2.2

2.1

F1 1,6A t

TS 971 Industrial Door Control

TS 971 - KSR6 – Wireless Optical Safety Edge

N.B. The TS 971 terminals 2.1 – 2.5 are disabled when the wireless safety edge used.

DO NOT CONNECT ANY DEVICE TO TS 971 TERMINALS 2.1 – 2.5

RECEIVEREMITTER

ST3 ST1

SET SWITCH

POSITION'A'

ST3

ST2 ST1

B A IR

KL1

SHOOT BOLT,

PASS DOOR OR

SLACK WIRE SWITCH

REMOVE LINK FROM X1 IF CONNECTING SHOOT

BOLT, PASS DOOR OR SLACK WIRE SWITCH

N.B. IF NO SWITCHES ARE CONNECTED TO X1

REMOVE THE LINK AND REPLACE WITH THE 8K2

RESISTOR SUPPLIED WITH THE BATTERY

SET SWITCH

POSITION'IR'

INSTALLATION AND PAIRING THE TS971 AND WIRELESS SAFETY EDGE

ST3

ST2 ST1

B A IR

KL1

10m

MAX

ST3

ST2 ST1

B A IR

KL1

OBSTRUCTIONS,

PARTICULARLY STEEL

OR REINFORCED

CONCRETE WILL REDUCE

THE RANGE OR BLOCK

THE SIGNAL ENTIRELY

ST3

ST2 ST1

B A IR

KL1

ST3

ST2 ST1

B A IR

KL1

SYSTEMS IN

THE SAME

AREA MUST BE

PROGRAMMED

TO DIFFERENT

CHANNELS.

PRESS AND

HOLD FOR 3

SEC

TURN TO 2.0 PRESS ONCE

AND RELEASE

TURN TO SELECT

A CHANNEL.

PRESS STOP

ONCE AND

RELEASE

10s

WITHIN 10 SEC PRESS

WIRELESS SAFETY EDGE

BUTTON P1

THE ADDITIONAL DECIMAL

POINT INDICATES THAT

PAIRING IS SUCCESSFUL

TURN BACK TO 0.0

AND BREIFLY PRESS

TO EXIT

CONSULT THE TS971 INSTALLATION INSTRUCTIONS FOR FULL INSTRUCTIONS AND SAFETY INFORMATION

2 - 2.2

TS 971 Industrial Door Control

TS 971

–

GF304528

RAYTECTOR HIGH LEVEL ENTRAPMENT PROTECTION BARRIER

IMPORTANT!

READ THE RAYTECTOR INSTRUCTIONS FOR ESSENTIAL INSTALLATION AND TESTING

PROCEDURES.

5.1

5.2

5.3

5.4

3.1

3.2

20.3

20.2

20.1

1.8

1.9

F1 = 1 6A t

1 BN

2 WE

4 GN1

6 GN2

OSE-C 2300

2 x OSE

1 x OSE

RELAY 2

RELAY 1

RELAY 3

TRANSFORMER

34 33

OSE

24 23

REV

A1 A2

Power

VITECTOR RAYTECTOR

RAY - R 1000

Receiver

RAY - T 1000

Transmitter

light barrier

inside

VITECTOR RAYTECTOR

RAY - T 1000

Transmitter

RAY - R 1000

Receiver

light barrier

outside

BROWN

WHITE

GREEN

BROWN

WHITE

GREEN

BROWN

WHITE

GREEN

BROWN

WHITE

GREEN

4 x BROWN

4 x WHITE

2 x GREEN

REMOVE LINK

TERMINALS 5 - 6

RAYTECTOR HIGH LEVEL ENTRAPMENT

PROTECTION BARRIERS

Andere Handbücher für TS 971 Series

Inhaltsverzeichnis

Andere GFA Controller Handbücher

GFA

GFA TS 981 Bedienungsanleitung

GFA

GFA LB 700 Bedienungsanleitung

GFA

GFA TS 971 Bedienungsanleitung

GFA

GFA TS 981 Bedienungsanleitung

GFA

GFA 51171735 00002 Bedienungsanleitung

GFA

GFA TS 970 Bedienungsanleitung

GFA

GFA TS 959 Bedienungsanleitung

GFA

GFA OFF and Re-made module for airlock Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch