GG Telecom Gg03 Bedienungsanleitung
Introduction
1-2
Gg03 overview 3
-7
Getting started
6-13
Using
your headset 17-22
Using
your headset
with multiple Bluetooth devices
23-27
Function / Button matrix
28-29
LED indicator chart
30-31
Audio indicator chart
32
Additional
i
nformation
33-38
Declaration of
c
onformity
39-41
Regulatory information
41-42
01
02
Handle incoming and outgoing calls.
Adjust the volume.
Mute the microphone.
Voice dialing (if your phone supports this function).
Last call redial (if your phone supports Handsfree profile).
Reject the incoming call (if your phone supports Handsfree profile).
What's in the package?
your headset Bluetooth headset package comes equipped with a headset and a charging solution.
In this package you will find:
One Bluetooth headset.
One 100-240V power adapter.
One USB charging cable.
One user guide.
One portable charging cradle in the Gg03 package.
One removeable ear-hook in the Gg03a package.
Introduction
lntroduction
Your Bluetooth headset Gg03 is a portable headset solution based on Bluetooth wireless technology.
Please read the "Additional Information”before using your headset.
What is Bluetooth
w
ireless
t
echnology?
Bluetooth is the most advanced cable-replacement technology available today. It enables effortless,
cable-free connections between your Bluetooth devices. your headset and the Bluetooth enabled
phone can communicate within the range up to 10m (30 ft) outdoors or up to 5m (15 ft) indoors with
no solid objects in between.
How to
u
se
your headset
?
your headset is a Bluetooth V1.2 qualified product and supports both Headset profile and Handsfree
profile. your headset can store information and wirelessly interacts with up to three different
Bluetooth V1.1/V1.2 compliant devices, including mobile phones, PDAs and PCs or any Bluetooth
enabled device that supports Headset profile or Handsfree profile. This manual focuses on how to
use your headset with your Bluetooth enabled phone. When your headset is connected to your
phone, you can do:
Gg03 overview
03
04
Gg03 overview
05
06
1.Indicator LED
There are 3 colors(blue/red/purple) to show the status of your headset.
2.Multifunction button
To answer, end, reject a call and control advance functions by constituting with
volume control button (please refer to the Function/Button matrix).
3.Volume control button
To increase or decrease the volume of speaker and control advance functions
by constituting with MFB (please refer to the Function/Button matrix).
4.Ear-hook
To wear the headset on your ear, you can switch the direction as your habit.
5. Speaker
Plays the sound you receive on the call or the audio indicators (please refer
to the audio indicator chart).
6. Microphone
Voice input for outgoing voice.
7. Charging port
Approaching with the cradle to charge the battery of your headset.
8. Charging Cradle
Design for charging the headset by multiple power supplier such as switching
adaptor, USB cable or car charger.
Gg03 overview
Getting started
07
08
Getting started
Before you can use your headset, you must do following two things:
1. Charge your headset battery, using an appropriate G.G. Telecom charger.
2. Pair your headset with a Bluetooth enabled device, for example, a mobile phone.
Charging
your headset comes with a built-in rechargeable battery. For the first time use, you need to charge
for 4 hours. During charging, the indicator shows a steady red light. When the battery is fully
charged, the red light is off. It takes 90-120 minutes to fully charge the battery. Do not charge your
headset for more than 1 day. The talk time of Gg03 is about 8 hours, and the standby time is about
220 hours. The more you talk using your headset, the less standby time your battery has. your
headset require longer charging times when not used over extended periods of time.
9. Charging Port
Plug in the USB charging cable to charge the battery of your headset.
10. Removable
Removeable ear-hook fits either ear.
Getting started
07
08
To charge your headset
1. Make sure the earhook forms an angle of 90˚.2.Secure the bottom of the headset on the cradle.
1 2
09
10
3.Press the tip of the earpiece firmly towards the cradle until you hear a click sound.
4.You will see the red light when the headset is properly charging.
5. It takes 90-120 minutes to fully recharge the battery. Red indicator is off.
6. Press the buttons on the both side of your cradle to remove your headset from your cradle.
56
3 4
Getting started
11
12
Gg03v
Gg03a
Getting started
Getting started
13
14
Pairing
Power on your headset
Long press the MFB , then you will hear a power on melody and the blue indicator will quickly
flash twice. You could start the operation now.
Note 1:
The first time your headset is turned on, it might automatically be ready for pairing.
Note 2:
Long press: It refers to press and release and the duration is more than 3 seconds. After long
press, you should hear 1 long beep.
Short press: It refers to press and release and the duration is less than 1 second. After short
press, you should hear 1 short beep.
Gg03a / Gg03v
1.Plug the USB charging cable into the charging port of the headset.
2.Plug the other end of the USB charging cable into the PC's USB port, charging adapter or
car charger.
3.When charging is complete (Red indicator is off, remove the charging adapter or car
charger, and detach the USB charging cable from the headset.
15
16
to the LED indicator chart).
2. Perform a "Bluetooth device discovery" from the mobile phone.
3. Select your headset from the discovered devices list and confirm the following on screen
prompts.
4. When prompted by your phone, enter the passkey “1234”and your headset will confirm to
pair successfully with a pairing success melody.
Note:
If your headset is not successfully paired within 2 minutes, it will automatically leave pairing
mode. If there is no paired data in the paired devices list of your headset, it will power off
otherwise get into standby mode.
Power off your headset
Long press the MFB , then you will hear a power off melody and the red indicator will quickly flash twice.
Pairing your headset with your phone
Pair your headset with your phone by adding it to the list of paired devices in your phone. your
headset should be paired once with your phone before use. The two devices then recognize each
other when they connect. You do not need to pair it again until you want to use your headset with
another device or the pairing information is deleted from your phone. It is recommended that the
distance between your headset and your phone is as close as possible with no solid objects in
between.
1. Put your headset enter pairing mode by long pressing the Volume up button . You can see the
blue indicator and the red indicator cross blink per second, your headset is waiting for pairing
now. You can only put your headset into pairing mode when it is in standby mode (please refer
Getting started
Inhaltsverzeichnis
Andere GG Telecom Headset Handbücher
