GhostEye 600M PLUS Produkthandbuch
600M PLUS WIRELESS
VIDEO TRANSMISSION SYSTEM
About the 600M Plus Wireless Video Transmission System 1
Foreword 1
Brief Introduction 1
Features 1
2Specification
Structure & Interface
Installation 7
LCD Screen 11
3
Supports full PSF resolutions 13
Trouble Shooting 14
Disclaimers 15
About Cinegears 17
As the widely use of live broadcasting, there is some problem existing in the process of cable
wiring, such as the high cost and short-life usage of the cable. Also, the cable trod by the crowd
under insufficient site protection is the major cause of cable performance, even lead to the live
broadcast accident. We provide you with more convenient and safer solution for live
broadcasting. The long distance transmission system applied with high-capacity Li-battery, plug-
and-play setting, can fully meet requirement of outdoor and indoor shooting. Especially, no cable
wiring will bring the safer and more professional experience to you!
Effective range up to 300M, suitable for film shooting, live broadcast, wedding and big
conference use.
Support 1080P/60Hz 4:2:2bit, uncompressed real time HD video transmitting.
Support HDMI/HD-SDI/3G-SDI.
Plug&Play - easy to install.
Support channel switching and broadcasting mode for 1transmitter to multiple receivers.
Compatible EDID 1.1, support HDMI 103 (1.4 3D, optional).
AES128/256 Encryption.
Please read this manual carefully before you use this product retain it properly for future
reference.
If there is any doubt or difficulty in the process of product usage, please feel free to contact
us or the dealer.
The company reserves the authority to amend the specification.
Brief Introduction
Features
1
Foreword
Specification
*Since the product’s improving process, all the performance, design and specifications of our products are subject to
minor change without prior notice.
Specification
ITEM Specification
Frequency 5.1-5.9(GHz)
Bandwidth 40MHz
Video Formats
Supported
1080p 23.98/24/25/30/50/60
1080psf 23.98/24/25
1080i 50/59.94/60
Supported
Audio Formats PCM, DTS-HD, Dolby TrueHD
transmission range 300m(MAX)
Transmitter
Antenna External Antenna x 2 pcs
Transmission power 18dbm
Functional Interface HDMI Input; SDI Input; SDI Loop Output; Mini USB; LEMO Power IN; Antenna RPSMA
Socket; Power ON/OFF
Locating Structure 1/4” Hot-shoe connection
LCD Screen Wireless Channel Info; SDI/HDMI Signal Info; Fan info
Working Voltage 9V-18V
Power Consumption 9W
Dimensions 142.5 x 76 x 24.3 mm
Temperature -10~60 (operating) 10%-90% humidity; -40~80 (storage) 10%-90% humidity.
Receiver
Antenna Internal Antenna x 5pcs
Receiving sensitivity -70dBm
Functional Interface SDI Dual Output; HDMI Output; Mini USB; LEMO Power IN; Antenna RPSMA Socket;
Power ON/OFF
Locating Structure 1/4” Hot-shoe connection; V-Mount
LCD Screen Wireless Channel Info; SDI/HDMI Signal Info
Working Voltage 9V-18V
Power Consumption 7-8W
Dimensions 141 x 100 x 22.4 mm
Temperature -10~60 (operating) 10%-90% humidity; -40~80 (storage) 10%-90% humidity.
2
Structure & Interface
Structure & Interface
Transmitter 600MP
3
Structure & Interface
*Since the product’s improving process, all the performance, design and specifications of
our
products are subject to minor change without prior notice.
Structure
1 LCD Screen
Display the information about the Channel, signal input, capacity, temperature.
2 UP
Select the correct Channel.
3 DOWN
Select the correct Channel.
4 MENU
Unlock the screen and confirm the selection.
5 Power ON/OFF
Power ON/OFF
6 SDI IN
Connect the HD camcorder which support 3G-SDI, HD-SDI
7 SDI OUT (Loop)
Connect to the HD digital monitor which support 3G-SDI, HD-SDI
8 HDMI IN
Connect to the HD digital camcorder with HDMI OUT
9 Power supply In (Lemo)
Support connecting to the power supply of the camera, or power adaptor.
10 Antenna Socket
SMA socket to connect the antenna.
11 Battery Clip
Support SONY F970/F550 battery to power supply.
12 1/4” Hot-shoe Connection
Support to connect with more methods.
4
Structure & Interface
Receiver 600MP
Structure & Interface
8
5
Structure & Interface
Structure
1 Antenna
Built-in Antennas.
2 LCD Screen
Display the information about Channels, signal input, capacity, temperature.
3 UP
Select the correct Channel.
4 DOWN
Select the correct Channel.
5 MENU
Unlock the screen and confirm the selection.
6 RSSI Status Display
Signal Strength
7 Power ON/OFF
Power ON/OFF
8 HDMI OUT
Connect to the TV/Monitor via the HDMI cable.
9 SDI OUT
Connect to the TV/Monitor via the HDMI cable.
10 Power supply In (Lemo)
Support connecting to the power supply of the camera, or power adaptor.
11 Battery Clip
Support SONY F970/F550 battery to power supply.
12 1/4 Hot-shoe Connection
Support to connect with more methods.
6
*Since the product’s improving process, all the performance, design and specifications of our
products are subject to minor change without prior notice.
For Transmitter
1.Fix the antennas to the transmitter, and arrange them to be right angle as
figured below.
Installation
13 Mini USB
For firmware upgrade use.
7
Inhaltsverzeichnis
Andere GhostEye Extender Handbücher
