Gi Spark 2 Combo Bedienungsanleitung

Spark 2 Combo

Quick Start Guide

Packing list

BOX 1pcs Remote 1pcs

(Optional)

HDMI Cable 1pcs Electric source 1pcs

Remote Control Unit

1. Power - Switch on or switch off receiver

2. MUTE - Switch on or switch off receiver's sound.

3. SETTING - A shortcut to run System Setting.

4. XBMC - A shortcut to run XBMC.

5. APP STORE - A shortcut to run APP STORE.

6. BACK - Back to the previous menu.

7. Menu - The entry of application's functions.

8. OK - Confirm the selection.

10. <</>> - Move to the left screen or right screen.

11. Home - Back to the portal of receiver.

12. Color Keys - Entries of application’s key functions.

13. V+/V- - Adjust receiver's volume.

14. Cursor - Enable or disable mouse function.

15. EPG - Display Electronic program Guide information.

16. INFO - Display detailed information of channel, program or application.

17. FIND - Search channel, program or application.

18. Num. keys - Enters specific channel number or values when needed.

19. Record - Record program to local storage such as USB stick.

20. F1 - Entries of application’s complement functions.

21. P+/P- - Page up/down.

22. Left/Right - Moving the highlight to left/right.

23. Up/Down - Moving the highlight to up/down.

How to activate mouse?

Press cursor key to activate mouse .The OK key has the same function as the left

button of the standard mouse.

Please notice that: mouse function is unavailable inTV screen.

Front Panel

Rear Panel

Preparation

1. Connecting Satellite Cables

Connect satellite cable from your satellite dish to the LNB input socket on the rear panel of Spark2 Combo box.

2. Connecting Terrestrial/Cable cables

Connect Terrestrial or Cable to the Aerial IN socket on the rear panel of Spark2 Combo box.

Note:Terrestrial and Cable using the same tuner, so they cannot be used at the same time.

3. Connecting theTV

Connect TV via HDMI or AV cable. If your TV supports high definition resolution such as 720P/1080P/2160P, we

recommend use HDMI cable.

4. Power ON/OFF

There are several ways to turn your Spark2 Combo ON or OFF.

◆Complete Power Shutdown

Remove the power supply; it takes a longer time to boot the system if you turned it off by this way.

◆Standby Mode

Press the power key to turn the power Spark2 Combo on or off.

Spark2 Combo includes a standby mode for lower power consumption (power saving mode) which locates at

[Setting > System > Misc. Setting > Standby Mode].

If power saving mode set to Standby, the system is not completely shut down and thus it takes a few seconds to

restart.

If power saving mode set to Deep Standby, it is used to reduce the standby power consumption. To save on

energy costs, we recommend leaving power saving mode act ive.

*Network Cable

Spark2 Combo BOX has built-in WIFI, it can connect to the network through the WIFI as well.

First Time installation

When you switch the box on for the first time, the easy installation starts automatically with the language

selection.

1. Language Selection

Use UP/DOWN key to scroll up and down to select the desired language and confirm with OK.

2. Press >> key go to next network setting.

If you are using the network cable to connect the LAN, You can set up the network sett ings through Ethernet

submenu.

When you have the option DHCP on, it will automatically detect the correct IP address. DHCP OFF is used when

you want to use a certain IP address. In this case, you need to enter correct addresses in each field. In the end,

select the save option to confirm your settings.

The WIFI submenu is used when Spark2 Combo connect to network via a wireless connection.

Select WIFI submenu, a screen appears showing the search results for available WLANs, select the appropriate

WLAN from the list, if it’s a secure network and it’s the f irst time you’ve used it, you will need to enter your wifi

network password to be able to connect.

The 3g submenu is used when Spark2 Combo connect to network via 3g network. Please note that an external 3g

USB dongle is required plug into USB port of Spark2 Combo for this functionality.

Select 3g submenu, the 3g parameters are displayed, you need to have all the details of 3g settings in each filed,

and then press green key to get 3g connected.

3. Press >> key go to time setting.

You can set the time Auto update by DVB or network mode. Set the Auto update to OFF be used when you want

to set time manually. In this case, you need to enter correct time in date and time field with number keys.

Select the desired time mode.

Select the correct GMT Offset according to your time zone.

4. Press >> key go to resolution setting.

Here you need select the desired resolut ion depending on your HD TV Set and confirm with OK.

5. When you have completed your settings by pressing the >> key, the Simple Install appears.

This menu allows you to configure one satellite with direct connecting, 4 satellites with DiSEqC 1.0 or 16

satellites with DiSEqC 1.1 and one Terrestrial or Cable tuner.

◆Use the left/right keys to move the highlight to the DiSEqC column and use the up/down keys to switch

between diseqc1.0 and diseqc1.1.

◆Use the left/right keys to move the highlight to the LNB column and then select the correct LNB type that

you have on your dish.

◆Use the left/right keys to move the highlight to the Satellite column and then select the proper satellite which

you wish to receive at the appointed DiSEqC port.

◆Press RED key to display scan setting and press OK key to start scan.This will take some minutes to scan all

your configured satellites. As the scan proceeds, you will see the progressive percent and the found programs.

After scan completed, you can exit the simple install menu to start watching and enjoying all your HD and SD

programs.

If you exit the first installation without fully completing the channel searching procedure, you may not have all

of the channels available. In this case, you can use the Advanced Install App to search for more channels.

Multi-screen interactive functions

Mobile APP

With the free Spark2 Combo mobile app, you are able to control Spark2 Combo box by mobile phone, and

transmit stream from your Spark2 Combo box to your iOS devices or android devices.

Web interface

With the Web interface you can Control your Spark2 Combo box using a browser on pc or mobile device, you can

watch TV, look up EPG-information, set and handle timers, send messages, use its virtual Remote Control and

much more.

DLNA

Inhaltsverzeichnis

Andere Gi Set-Top-Box Handbücher

Gi PROOVE it Bedienungsanleitung

Beliebte Set-Top-Box Handbücher anderer Marken

VBrick

VBrick 8000-0188 Bedienungsanleitung

Kogan

Kogan KGNPVR500VAA Bedienungsanleitung

Asus

Asus O!PLAY MEDIA PRO Bedienungsanleitung

Samsung

Samsung ICU 100 Bedienungsanleitung

VECTORMAX

VECTORMAX A12E Bedienungsanleitung

DStv

DStv Explora Bedienungsanleitung

Ace Digital TV

Ace Digital TV ADB 3800 Bedienungsanleitung

Cisco

Cisco 4398DVB Bedienungsanleitung

Polaroid

Polaroid KHA-01651B Bedienungsanleitung

Samsung

Samsung GX-SM530CF Bedienungsanleitung

BT Business Total Broadband Bedienungsanleitung

Megasat

Megasat HD 720 plus Bedienungsanleitung

Sungale

Sungale STB608 Bedienungsanleitung

Amino

Amino Amigo 7X Bedienungsanleitung

Geniatech

Geniatech ATV225 Bedienungsanleitung

Android

Android Androidminibox mx2 se Bedienungsanleitung

Hama

Hama Internet TV Box Bedienungsanleitung

Ariva

Ariva T650i Bedienungsanleitung