Giada DE67 Bedienungsanleitung
- 1 -
- 2 -
Statement
The copyright of this manual belongs to Shenzhen JEHE Technology Development Co., Ltd. (Giada,
JEHE’s global brand) and all rights are reserved. The company reserves the right to change this
manual at any time without notification. Specifications here are for reference only, please take the
real product as standard.
Without official authorization of Giada, other companies or individuals may not copy, plagiarize,
translate, or disseminate this manual for commercial purpose.
The information provided in this manual is accurate and reliable. The company does not take any
legal responsibility for the consequences of infringement use of this manual.
Safety Notice
• Read the user manual carefully before setting up the Giada product.
• Disconnect the power cord before installing the internal components
• Most electronic components are sensitive to static electrical charge, please wear a wrist-grounding
strap when installing the internal components.
• Do not disconnect the power cord when the system is running to avoid damage to the sensitive
components by instantaneous surge voltage.
Contact Information
Shenzhen JEHE Technology Development Co., Ltd.
Website: www.giadatech.com
Phone: +86-755-3330 0336
Email: support@giadatech.com
Address: 1~3/F, Block A, Tsinghua Information Harbor, North Section, Shenzhen Hi-tech
Park, Nanshan District, Shenzhen, China
- 3 -
Table of Contents
1. Product Introduction .............................................................................................. 5
2. Interface Description and Hardware Specifications ............................................ 5
2.1 Interface Description ............................................................................................ 5
2.2 Hardware Specifications ...................................................................................... 6
3. Accessories Installation Steps ................................................................................. 7
3.1 Memory Installation ............................................................................................. 8
3.2 WiFi/3G/4G Installation ....................................................................................... 9
3.3 MSATA Installation ............................................................................................ 10
3.4 SSD (M.2) Installation ....................................................................................... 10
3.5 2.5’’SATA Installation ........................................................................................ 11
3.6 SIM Card Installation ......................................................................................... 12
4. BIOS Setup ............................................................................................................ 13
4.1 Main (Standard CMOS Setup) ........................................................................... 16
4.2 Advanced (Advanced BIOS Setup) .................................................................... 17
4.2.1 CPU Configuration .................................................................................... 17
4.2.2 ACPI Settings ............................................................................................ 18
4.2.3 LAN Configuration ................................................................................... 20
4.2.4 Super IO Configuration ............................................................................. 21
4.2.5 Hardware Monitor ..................................................................................... 26
4.2.6Wake Configuration ................................................................................... 26
- 4 -
4.2.7 CSM Configuration ................................................................................... 27
4.3 Chipset ................................................................................................................ 29
4.4 Security Setup .................................................................................................... 31
4.5 Boot Menu .......................................................................................................... 32
4.6 Save & Exit ........................................................................................................ 34
5. JAHC Introduction ............................................................................................... 35
5.1 Auto Power On ................................................................................................... 35
5.2 JAHC Software .................................................................................................. 35
5.2.1 JAHC Software Functions ........................................................................ 35
5.2.2 JAHC Software Installation Guide ........................................................... 36
5.2.3 Startup and Shutdown Time Setup ............................................................ 39
5.3 Watchdog API and Instruction ........................................................................... 41
- 5 -
1. Product Introduction
Based on Kabylake platform, Giada DE67 adopts high performance Intel® core processors.
Configured with rich I/O ports, the player is suitable to be applied in high-end digital signage, kiosk
and automation control applications.
2. Interface Description and Hardware Specifications
2.1 Interface Description
Front I/O Port
Rear I/O Port
- 6 -
2.2 Hardware Specifications
DE67
Processor
CPU
Intel®Core™ i3-7100U
Intel®Core™ i5-7200U
Frequency
2.4 GHz
2.5 GHz up to 3.1 GHz
BIOS
AMI Source Code
Chipset
SOC
Memory
Type
DDR3L – 1600MHz
Socket
2 x SO-DIMM
Max Capacity
32 GB
Graphics
GPU
Intel®HD Graphics 620
Graphic Engine
Direct3D 2015, OpenGL 4.5, OpenCL 2.1
DP
1x DP (Max.4096 x 2304@60Hz)
HDMI
1x HDMI (Max.3840 x 2160@60Hz)
VGA
1 x VGA (Max.2048 x 1536 @60Hz)
Network
Controller
1 x Intel®I211, 1 x Intel® I219, Gigabit Ethernet
Interface
2 x RJ45
I/O Interface
USB
3 x USB 3.0, 2 x USB 2.0, 1 x Type-C USB 3.0
Serial Port
4 x RS232,2 x RS485
Audio
1 x MIC-IN, 1 x AUDIO OUT
M.2
1 x M.2 (2242/2280) for SSD
Mini PCIe #1
1 x Full-size Mini-PCIe for mSATA
Mini PCIe #2
1 x Full-size Mini-PCIe for WIFI/BT/3G/4G
Sim
1 x Sim Slot
Storage
M.2
1 x M.2 (2242/2280) for SSD
Mini-PCIe
1 x Full-size Mini-PCIe for mSATA
SATA
1 x 2.5’’ SATA
JAHC
JAHC
Watchdog / Auto Power On / IR Remote Control / RTC / Wake On Lan
Operation
System
OS
Windows 8.1/10（64-bit) / Linux
Power
Power Type
DC-IN
Input Voltage
19V/3.42A
Mechanical
Construction
Metal
Mounting
Desk/VESA Mounting（JZ300）
Dimension
(W x D x H)
260mm x 173.4mm x 38.5mm
Color
Black
- 7 -
Environment
Operating
Temperature
0-40℃at 0.7m/s Air Flow
Relative Humidity
95%@40℃(non-condensing)
Certification
CE, FCC Class B
3. Accessories Installation Steps
For safety reasons, please ensure that the power cord is disconnected before opening the case.
How to open the cover
Unscrew the two screws and remove the top cover. (M.2 for SSD and 2.5’’SATA slots are on top
side)
Unscrew one screw. Push the bottom cover and remove it. (SO-DIMM #1, SO-DIMM #2, mini PCIe
for WIFI/BT/3G/4G and mini PCIe for mSATA slots are on bottom side)
- 8 -
3.1 Memory Installation
This product only supports DDR3L SO-DIMM memory modules.
1. Locate the SO-DIMM slot on the board.
2. Gently insert the module into the slot in a 45-degree angle.
3. Carefully push down the memory module until it snaps into the locking mechanism.
- 9 -
3.2 WiFi/3G/4G Installation
WIFI Installation
1. Tighten the WIFI module and WIFI module bracket with screws.
2. Plug the WIFI module into the mini PCIE slot.
3. Secure the module to the carrier by tightening up the screw.
4. Connect two black cables to Main and AUX. Install the antennas.
3G/4G Installation
Default SMA connector and cable is for WIFI. Please change to 3G/4G SMA connector and cable.
1. Plug the 3G/4G module into the mini PCIE slot.
2. Secure the module to the carrier by tightening up the screw.
3. Connect the cable to Main and install the antenna.
- 10 -
3.3 MSATA Installation
1. Plug the MSATA module into the mini PCIE slot.
2. Secure the module to the carrier by tightening up the screw.
3.4 SSD (M.2) Installation
1. Plug the SSD (M.2) into the appropriate slot.
2. Secure the module to the carrier by tightening up the screw.
Inhaltsverzeichnis
Beliebte Touch-Screen Handbücher anderer Marken
Elecro Engineering
Elecro Engineering Poolsmart Plus Montageanleitung
Johnson Controls
Johnson Controls IQ4 HUB Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems ET2270L Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems ET1002L Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems 3201L Bedienungsanleitung
Duratec
Duratec S15 Bedienungsanleitung
