Gigabyte 5AA Bedienungsanleitung

5AA

3.11. GREEN FUNCTION INSTALLATION....................................... 3-8

3.12. PERIPHERAL DEVICE INSTALLATION................................... 3-8

4. BIOS CONFIGURATION

4.1. ENTERING SETUP................................................................... 4-1

4.2. CONTROL KEYS ...................................................................... 4-2

4.3. GETTING HELP........................................................................ 4-3

4.3.1. Main Menu............................................................................. 4-3

4.3.2. Status Page Setup Menu / Option Page Setup Menu.............. 4-3

4.4. THE MAIN MENU...................................................................... 4-3

4.5. STANDARD CMOS SETUP MENU............................................ 4-5

4.6. BIOS FEATURES SETUP ......................................................... 4-9

4.7. CHIPSET FEATURES SETUP................................................... 4-13

4.8. POWER MANAGEMENT SETUP.............................................. 4-17

4.9. PNP/PCI CONFIGURATION...................................................... 4-22

4.10. LOAD BIOS DEFAULTS.......................................................... 4-25

4.11. LOAD SETUP DEFAULTS....................................................... 4-26

4.12. INTEGRATED PERIPHERALS ................................................ 4-27

4.13. SUPERVISOR / USER PASSWORD....................................... 4-32

4.14. IDE HDD AUTO DETECTION.................................................. 4-33

4.15. SAVE & EXIT SETUP.............................................................. 4-34

4.16. EXIT WITHOUT SAVING ........................................................ 4-35

A.Trobuleshooting............................................................................ 5-1

Introduction

1-1

1. INTRODUCTION

1.1. PREFACE

Welcome to use the 5AA motherboard. The motherboard is a Pipeline 512 KB

CACHE PentiumProcessor based PC / AT compatible system with ISA bus and

PCI Local Bus, and has been designed to be the fastest PC / AT system. There are

some new features allow you to operate the system with the performance you want.

This manual also explains how to install the motherboard for operation, and how to

set up your CMOS CONFIGURATION with BIOS SETUP program.

1.2. KEY FEATURES

qPentiumProcessor based PC / AT compatible mainboard with PCI / ISA / AGP

Bus.

q3 PCI Bus slots, 2 ISA Bus slots, 1 AGP slot.

qSupports :

•PentiumProcessor :133/166/200 MHz; MMX (166 / 200 / 233)

•AMD :K6-(166 / 200 / 233 / 266 / 300)

K6-2(266 / 300 / 333 / 350 / 366 / 380 / 400 / 450 /

475 / 500 / 550 )

K6-III(400 / 450 / 475 / 500 / 550)

•Cyrix/IBM :6x86MX (PR166 / PR200 / PR233 / PR266) ;

M¢º-PR300 / PR333 / PR366 / PR400

•IDT :Winchip 2-(200 / 225 / 233 / 266 / 300)

Winchip 3-(266)

•RISE :MP6-(266)

qSupports true 64 bits CACHE and DRAM access mode.

qSupports 321 Pins (Socket 7) ZIF white socket on board.

qSupports 512 KB Pipeline Burst Sync. 2nd Level Cache.

qCPU L1 / L2 Write-Back cache operation.

qSupports 16 ~ 256 MB DRAM memory on board.

5AA

1-2

qSupports 3*168 pin 64/72 Bit DIMM module.

qSupports 2-channel Enhanced PCI IDE ports for 4 IDE Devices.

qSupports 2*COM (16550), 1*LPT (EPP / ECP), 1*1.44MB Floppy port.

qSupports Green function, Plug & Play function.

qLicensed AMI BIOS, FLASH RAM for BIOS update.

q22cm*21cm, Baby AT Form factor.

qSupports USB port & PS/2 Mouse and Keyboard port.

qSupports Keyboard Power On/Off.

qSupport Ultra DMA 33 and ATA 66.

qSupport AC Back power management.

qSupport IrDA function for Fast IrDA.

Introduction

1-3

1.3. PERFORMANCE LIST

The following list of performance data is the testing results of some popular

benchmark testing programs.

These data are just referred by users, and there is no responsibility for different

testing data values gotten by users. (The different Hardware & Software

configuration will result in different benchmark testing results.)

•CPU AMD K6-2 500, AMD K6-III 450, AMD K6-2+/450

•DRAM (128×1) MB SDRAM (HYUNDAI HY57V658020A TC-10S)

•CACHE SIZE 512 KB

•DISPLAY GA-660 (32MB SDRAM)

•STORAGE Onboard IDE (Quantum KA13600AT)

•O.S. Windows® NT 4.0+ SPK5

•DRIVER Display Driver at 1024 x 768 x 256 colors x 75Hz.

ALi Bus Master IDE Driver

Processor AMD K6-2/500

(100x5)

AMD K6-III/450

(100x4.5)

AMD K6-2+/450

(100x4.5 )

Winbench98

CPU mark32 23.2 36.2 34.2

FPU Winmark 1610 1520 1520

Business Disk 4630 5060 4620

Hi-End Disk 11700 12300 12600

Business

Graphics 134 206 190

Hi-End Graphics 249 346 335

Winstone98

Business 26.7 32 30.1

Hi-End 21.4 24 23.1

5AA

1-4

1.4. BLOCK DIAGRAM

CPU

PBSRAM

AGP

DEVICE

Host

Address

Host Data

Bus

ISA Bus

MD Bus

ALi M1543C

ALi M1542

DRAM

MA Bus

100MHz

33MHz

48MHz

14.318MH

PCI

Device

PCI

Device

PCI

Device

PCI Bus

ISA

Device

ISA

Device

COMA

COMB

LPT FDD

PS/2

GPIO

USB

100MHz

66MHz

14.318Hz

8MHz

100MHz

14.318Hz

66MHz

Mouse

Keyboard

IDE DEVICE

66MHz

100MHz

ICS9148

AF-75

Introduction

1-5

1.5. INTRODUCE THE PCI - BUS

Connecting devices to a CPU local bus can dramatically increase the speed of I/O-

bound peripherals with only a slight increase in cost over traditional systems.

This price / Performance point has created a vast market potential for local bus

products.

The main barrier to this market has been the lack of an accepted standard for local

bus peripherals.

Many mainboard and chipset manufactures developed their own local bus

implementations, but they are incompatible with each other.

The VL (Video Electronics Standards Association) local bus and PCI (Peripheral

Component Interconnect) bus specification was created to end this confusion.

The PCI - bus standard, under development since Jun. 1992, which is designed to

bring workstation-level performance to standard PC platform. The PCI - bus

removes many of the bottlenecks that have hampered PC for several years.

On the PCI - bus, peripherals operate at the native speed of the computer system,

thus enabling data transfer between peripherals and the system at maximum speed.

This performance is critical for bandwidth-constrained devices such as video,

multimedia, mass storage, and networking adapters.

PCI - bus standard provides end-users with a low-cost, extendible and portable local

bus design, which will allow system and peripherals from different manufactures to

work together.

1.6. FEATURES

q32 bits bus transfer mode.

qBus Master or Slave access.

qMemory burst transfer to 132 MB/sec.

q33 MHz operation speed.

q10 device loading ability.

qCPU independent.

5AA

1-6

1.7. What is AGP

The Accelerated Graphics Port (AGP) is a new port on the Host-To-PCI bridge

device that supports graphics display interface. The main purpose of the AGP port

is to provide fast access to system memory.

The AGP port can be used either as fast PCI port (32-bits at 66MHz vs. 32-bits at

33MHz) or as an AGP port which supports 2x data-rate, a read queue, and side

band addressing. When the 2x-data rate is used the port can transmit data at

533Mb/sec (66.6*2*4). The read-queue can be used to pipeline reads –removing the

effects of the reads-latency. Side band addressing can be used to transmit the data

address on a separate line in order to further speed the transaction.

Specification

2-1

2. SPECIFICATION

2.1. HARDWARE

•CPU −PentiumProcessor

133 / 166 / 200 MHz ; MMX(166 / 200 / 233)

−AMD

K6 (166 / 200 / 233 / 266 / 300)

K6-2 (266 / 300 / 333 / 350 / 366 / 380 / 400 / 450

/ 475 / 500 / 550)

K6-III (400 / 450 / 475 / 500 / 550)

−Cyrix / IBM

6x86MX (PR166 / PR200 / PR233 / PR266)

M¢º-PR300 / PR333 / PR366 / PR400

−IDT

Winchip 2-(200 / 225 / 233 / 266 / 300)

Winchip 3-(266)

−RISE

MP6-(266)

−321 pins (socket 7) ZIF white socket on board.

−1.3V-3.5V Dual Power Ready.

•COPROCESSOR −Included in processor.

•SPEED −66 / 75 / 83 / 95 /100MHz system speed.

−66 MHz AGP-Bus speed.

−33 MHz PCI-Bus speed.

−8 MHz AT bus speed.

•DRAM MEMORY −3 banks 168 pins DIMM module socket on board.

−Use 16 / 32 / 64 / 128 / 256 MB 50~60 ns DIMM

module DRAM.

−16 ~ 256 MB DRAM size.

−Supports 3.3V SDRAM / EDO type DRAM.

−Supports ECC or Non-ECC type DRAM.

•CACHE MEMORY −16 / 24 / 32 / 64KB L1cache included in CPU.

−512 KB 2nd Level cache on board.

−Supports Write Back cache function for both CPU

& on board cache.

•I/O BUS SLOTS −3 xMaster / Slave PCI-BUS Slots.

−2 x16 bits ISA BUS Slots.

−1 xAGP Slot.

5AA

2-2

•IDE PORTS −2-channel Enhanced IDE port on board.(Using

IRQ14,15)

−Supports Mode 3,4 IDE & ATAPI CD –ROM.

−Supports Ultra DMA 33 and ATA 66.

•I/O PORTS −Supports 2 x16550 COM ports. (Using IRQ4, 3)

−Supports 1 x EPP/ECP LPT port. (Using IRQ7 or 5

and DMA3 or 1)

−Supports 1 x 1.44/2.88 MB Floppy port. (Using

DMA2 & IRQ6)

−Supports PS/2 Mouse. (Using IRQ12 )

−1 IrDA connector for Fast IrDA

•GREEN FUNCTION −Suspend mode support.

−Green switch .

−IDE & Display power down support.

−Monitor all IRQ / DMA / Display / I/O events.

•BIOS −1Mbit FLASH RAM.

−Supports Plug & Play Function.

•DIMENSION −Baby AT Form Factor, 4 layers PCB.

2.2. SOFTWARE

•BIOS −Licensed AMI BIOS.

−AT CMOS Setup, BIOS / Chipset Setup, Green

Setup, Hard Disk Utility included.

•O.S. −Operation with MS-DOS, Windows95,

Windows98, WINDOWSNT, OS/2, NOVELL

and SCO UNIX.

2.3. ENVIRONMENT

•Ambient Temp. −0°C to +50°C (Operating).

•Relative Hum. −0 to +85% (Operating).

•Altitude −0 to 10,000 feet (Operating).

•Vibration −0 to 1,000 Hz.

•Electricity −4.9 V to 5.2 V.

−Max. 20A current at 5V.

Hardware Installation

3-1

3. HARDWARE INSTALLATION

3.1. UNPACKING

The mainboard package should contain the following:

•The 5AA mainboard.

•USER’S MANUAL for mainboard.

•Cable set for IDE ¡B Floppy ¡B I/O Port & PS/2 mouse (Optional).

•CD for Mainboard Drivers and Utilities.

The mainboard contains sensitive electric components which can be easily

damaged by static electricity, so the mainboard should be left in its original packing

until it is installed.

Unpacking and installation should be done on a grounded anti-static mat.

The operator should be wearing an anti static wristband, grounded at the same point

as the anti-static mat.

Inspect the mainboard carton for obvious damage. Shipping and handling may

cause damage to your board. Be sure there are no shipping and handling damage

on the board before proceeding.

After opening the mainboard carton, extract the system board and place it only on a

grounded anti-static surface component side up. Again inspect the board for

damage.

Press down on all of the socket IC’s to make sure that they are properly seated. Do

this only on with the board placed on a firm flat surface.

DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN DAMAGED.

It is assumed that the chassis is designed for a standard AT mainboard mounting.

Place the chassis on the anti-static mat and remove the cover.

Take the plastic clips, Nylon stand-off and screws for mounting the system board,

and keep them separate.

Andere Handbücher für 5AA

Inhaltsverzeichnis

Andere Gigabyte Hauptplatine Handbücher

Gigabyte

Gigabyte GA-6PXSVL Bedienungsanleitung

Gigabyte

Gigabyte 6ZXC Bedienungsanleitung

Gigabyte

Gigabyte MVBAYAI Bedienungsanleitung

Gigabyte

Gigabyte GA-Z97X-SOC Force Bedienungsanleitung

Gigabyte

Gigabyte GA-Q87M-D2H Bedienungsanleitung

Gigabyte

Gigabyte GA-MA770-DS3 Bedienungsanleitung

Gigabyte

Gigabyte B650M AORUS ELITE AX ICE Bedienungsanleitung

Gigabyte

Gigabyte GA-7VR Bedienungsanleitung

Gigabyte

Gigabyte B450 I AORUS PRO WIFI Bedienungsanleitung

Gigabyte

Gigabyte GA-6WFZ7 Bedienungsanleitung

Gigabyte

Gigabyte GA-Q67M-D2H-B3 Bedienungsanleitung

Gigabyte

Gigabyte GA-8PE667 Pro Bedienungsanleitung

Gigabyte

Gigabyte 8VM800M-RZ Bedienungsanleitung

Gigabyte

Gigabyte GA-8IG1000 Pro-G Bedienungsanleitung

Gigabyte

Gigabyte GA-6RXB Bedienungsanleitung

Gigabyte

Gigabyte B360M GAMING HD Bedienungsanleitung

Gigabyte

Gigabyte B460M AORUS ELITE Bedienungsanleitung

Gigabyte

Gigabyte 6VMA Bedienungsanleitung

Gigabyte

Gigabyte GA-B75-D3V Bedienungsanleitung

Gigabyte

Gigabyte B365 HD3 Bedienungsanleitung

Gigabyte

Gigabyte 6GXU Bedienungsanleitung

Gigabyte

Gigabyte Z390 UD Bedienungsanleitung

Gigabyte

Gigabyte Z790 A ELITE AX DDR4 Bedienungsanleitung

Gigabyte

Gigabyte Z790 UD AX Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung