Gigabyte A620I AX Bedienungsanleitung

A620I AX

User's Manual

Rev. 1001

GIGABYTE will reduce paper use in order to fulll the responsibilities of a global citizen.

Also, to reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE's website.

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

For detailed product information, carefully read the User's Manual.

For quick set-up of the product, refer to the Quick Installation Guide on GIGABYTE's

website.

https://download.gigabyte.com/FileList/Manual/mb_manual_quick-guide_am5.pdf?m=sw

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"

means the revision of the motherboard is 1.0. Check your motherboard revision before updating

motherboard BIOS, drivers, or when looking for technical information.

Example:

- 3 -

Table of Contents

Chapter 1 Product Introduction .....................................................................................4

1-1 Motherboard Layout ........................................................................................... 4

Chapter 2 Hardware Installation....................................................................................5

2-1 Installation Precautions ...................................................................................... 5

2-2 Product Specications........................................................................................ 6

2-3 Installing the CPU and CPU Cooler ................................................................... 9

2-4 Installing the Memory ....................................................................................... 12

2-5 Installing an Expansion Card ........................................................................... 13

2-6 Back Panel Connectors.................................................................................... 14

2-7 Internal Connectors.......................................................................................... 16

Chapter 3 BIOS Setup.................................................................................................26

Chapter 4 Installing the Operating System and Drivers ..............................................28

4-1 Operating System Installation .......................................................................... 28

4-2 Drivers Installation............................................................................................ 29

Chapter 5 Appendix.....................................................................................................30

5-1 Conguring a RAID Set.................................................................................... 30

Regulatory Notices..................................................................................................... 31

Contact Us.................................................................................................................. 34

- 4 -

1-1 Motherboard Layout

Chapter 1 Product Introduction

Temperature sensor

(Note) The chip/temperature sensor is on the back of the motherboard.

U32G2C

DP_HDMI_1

U32G2_LAN

SOCKET AM5

ATX

AUDIO

DDR5_A1

DDR5_B1

BAT

AMD

Chipset

CLR_CMOS

M_BIOS

CODEC

PCIEX16

F_U32

F_U32C

A620I AX

SYS_FAN2

D_LED

F_AUDIO

F_USB

LED_C

F_PANEL

CPU_FAN

ATX_12V

USB20

SATA3_1

SYS_FAN1

QFLASH_PLUS

QFLED

80 iTE®

Super I/O

U32_20

SPEAKER

SATA3_0

M2_WIFI

BAT

Realtek®

2.5GbE LAN (Note)

M2A_CPU

(Note)

- 5 -

2-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keep your hands dry and rst touch a metal object to eliminate static electricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

Chapter 2 Hardware Installation

- 6 -

2-2 ProductSpecications

CPU AMD Socket AM5, support for:

AMD Ryzen™ 7000 Series Processors

(Go to GIGABYTE's website for the latest CPU support list.)

Chipset AMD A620

Memory Support for DDR5 5200/4800/4400 MT/s memory modules

 2 x DDR5 DIMM sockets supporting up to 96 GB (48 GB single DIMM capacity)

of system memory

Dual channel memory architecture

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

 Support for AMD EXtended Proles for Overclocking (AMD EXPO™) and Extreme

Memory Prole (XMP) memory modules

(The CPU and memory conguration may affect the supported memory types, data

rate (speed), and number of DRAM modules, please refer to "Memory Support

List" on GIGABYTE's website for more information.)

Onboard

Graphics

Integrated Graphics Processor with AMD Radeon™ Graphics support:

- 1 x DisplayPort, supporting a maximum resolution of 3840x2160@144 Hz

* Support for DisplayPort 1.4 version.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz

* Support for HDMI 2.1 version and HDCP 2.3.

** Support for native HDMI 2.1 TMDS compatible ports.

(Graphics specications may vary depending on CPU support.)

Audio Realtek®Audio CODEC

High Denition Audio

2/4/5.1/7.1-channel

* You can change the functionality of an audio jack using the audio software. To

congure 7.1-channel audio, access the audio software for audio settings.

LAN Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)

Wireless

Communication

Module

Realtek® Wi-Fi 6E RTL8852CE

- WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands

- BLUETOOTH 5.3

- Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

(Actual data rate may vary depending on environment and equipment.)

Expansion Slots CPU:

- 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16

Storage Interface CPU:

- 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support)

Chipset:

- 2 x SATA 6Gb/s connectors

RAID 0 and RAID 1 support for NVMe SSD storage devices

RAID 0 and RAID 1 support for SATA storage devices

- 7 -

USB CPU:

- 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 1 support

- 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel

- 1 x USB 2.0/1.1 port on the back panel

Chipset:

- 1 x USB Type-C® port with USB 3.2 Gen 1 support, available through the

internal USB header

- 3 x USB 3.2 Gen 1 ports (1 port on the back panel, 2 ports available through

the internal USB header)

- 4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through

the internal USB header)

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

1 x CPU fan header

2 x system fan headers

1 x addressable LED strip header

1 x RGB LED strip header

1 x M.2 Socket 3 connector

2 x SATA 6Gb/s connectors

1 x front panel header

1 x front panel audio header

1 x speaker header

1 x USB Type-C® header, with USB 3.2 Gen 1 support

1 x USB 3.2 Gen 1 header

1 x USB 2.0/1.1 header

1 x Clear CMOS jumper

1 x chassis intrusion header

Back Panel

Connectors

1 x DisplayPort

1 x HDMI port

1 x USB Type-C® port, with USB 3.2 Gen 1 support

1 x USB 3.2 Gen 2 Type-A port (red)

1 x USB 3.2 Gen 1 port

3 x USB 2.0/1.1 ports

1 x Q-Flash Plus button

1 x RJ-45 port

2 x SMA antenna connectors (2T2R)

3 x audio jacks

I/O Controller iTE® I/O Controller Chip

- 8 -

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

Water cooling ow rate detection

Fan fail warning

Fan speed control

* Whether the fan speed control function is supported will depend on the fan you install.

BIOS 1 x 256 Mbit ash

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for GIGABYTE Control Center (GCC)

* Available applications in GCC may vary by motherboard model. Supported functions

of each application may also vary depending on motherboard specications.

Support for Q-Flash

Support for Q-Flash Plus

Bundled

Software

Norton® Internet Security (OEM version)

LAN bandwidth management software

Operating

System

Support for Windows 11 64-bit

Support for Windows 10 64-bit

Form Factor Mini-ITX Form Factor; 17.0cm x 17.0cm

* GIGABYTE reserves the right to make any changes to the product specications and product-related information without

prior notice.

&Please visit the SERVICE/SUPPORT\Utility page on GIGABYTE's website to download the latest version

of apps.

https://www.gigabyte.com/Support/Utility/Motherboard?m=ut

- 9 -

2-3 Installing the CPU and CPU Cooler

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•Set the CPU host frequency in accordance with the CPU specications. It is not recommended

that the system bus frequency be set beyond hardware specications since it does not meet the

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications, please do so according to your hardware specications including the CPU, graphics

card, memory, hard drive, etc.

A. Note the CPU Orientation

Note the alignment keys on the motherboard CPU socket and the notches on the CPU.

Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load

plate automatically after you insert the CPU and close the load plate.

&Please visit GIGABYTE's website for details on hardware installation.

http://www.gigabyte.com/WebPage/210/quick-guide.html?m=sw

Notch

Triangle Pin One

Marking on the

CPU

AM5 CPU

Alignment Key

AM5 CPU Socket

Triangle Pin One

Marking of the

CPU Socket

- 10 -

B. Installing the CPU

Follow the steps below to correctly install the CPU into the motherboard CPU socket.

Do not force to engage the CPU socket locking lever when the CPU is not installed correctly

as this would damage the CPU and CPU socket.

Pin One

j

Gently press the CPU socket lever

handle down and away from the socket.

k

Completely lift up the CPU socket lock-

ing lever.

l

With your ngers, hold the plastic protec-

tive cover attached to the metal load

plate to lift open the metal load plate.

Hold the CPU with your fingers by the

edges. Align the CPU pin one marking (tri-

angle) with the pin one corner of the CPU

socket (or you may align the CPU notches

with the socket alignment keys) and gently

insert the CPU into position.

Make sure the CPU is properly installed

and then close the load plate. Secure the

socket lever under its retention tab. The

plastic protective cover will pop off by itself

and can be removed.

* Always replace the plastic protective

cover when the CPU is not installed to pro-

tect the CPU socket.

Inhaltsverzeichnis

Andere Gigabyte Hauptplatine Handbücher

Gigabyte

Gigabyte Z490 AORUS ELITE AC Bedienungsanleitung

Gigabyte

Gigabyte GA-686NX Bedienungsanleitung

Gigabyte

Gigabyte GA-Q170M-D3H-GSM Bedienungsanleitung

Gigabyte

Gigabyte B460M D2V Bedienungsanleitung

Gigabyte

Gigabyte 8S661FXM-RZ Bedienungsanleitung

Gigabyte

Gigabyte GA-6VXD7 Bedienungsanleitung

Gigabyte

Gigabyte GA-H61M-D1 Bedienungsanleitung

Gigabyte

Gigabyte GA-9ILDR Bedienungsanleitung

Gigabyte

Gigabyte B560M D2V Bedienungsanleitung

Gigabyte

Gigabyte GA-K8U Bedienungsanleitung

Gigabyte

Gigabyte GA-X79-UD7 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDTH Bedienungsanleitung

Gigabyte

Gigabyte GA-M55plus-S3G Handbuch

Gigabyte

Gigabyte GA-H61MA-D2V Bedienungsanleitung

Gigabyte

Gigabyte GA-P41-ES3G Bedienungsanleitung

Gigabyte

Gigabyte GA-F2A78M-D3H Bedienungsanleitung

Gigabyte

Gigabyte GA-8I865PE-L Bedienungsanleitung

Gigabyte

Gigabyte GA-C1007UN Bedienungsanleitung

Gigabyte

Gigabyte R281-Z94 Bedienungsanleitung

Gigabyte

Gigabyte GA-7VKMLE Bedienungsanleitung

Gigabyte

Gigabyte GA-8STML Bedienungsanleitung

Gigabyte

Gigabyte GA-G41MT-D3 Bedienungsanleitung

Gigabyte

Gigabyte GA-MA785GMT-UD2H Bedienungsanleitung

Gigabyte

Gigabyte X570S UD Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung