Gigabyte GA-H97M-Gaming 3 Bedienungsanleitung

GA-H97M-Gaming 3

User's Manual

Rev. 1001

12ME-H97MG3-1001R

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by

any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means the

revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard BIOS,

drivers, or when looking for technical information.

Example:

Motherboard

GA-H97M-Gaming 3

Apr. 25, 2014

Motherboard

GA-H97M-Gaming 3

- 3 -

Table of Contents

GA-H97M-Gaming 3 Motherboard Layout.......................................................................4

GA-H97M-Gaming 3 Motherboard Block Diagram..........................................................5

Chapter 1 Hardware Installation .....................................................................................6

1-1 Installation Precautions.................................................................................... 6

1-2 Product Specications...................................................................................... 7

1-3 Installing the CPU ............................................................................................ 9

1-4 Installing the Memory..................................................................................... 10

1-5 Installing an Expansion Card ......................................................................... 10

1-6 Back Panel Connectors.................................................................................. 10

1-7 Internal Connectors........................................................................................ 12

Chapter 2 BIOS Setup ..................................................................................................18

2-1 Startup Screen ............................................................................................... 18

2-2 M.I.T. .............................................................................................................. 19

2-3 System Information ........................................................................................ 24

2-4 BIOS Features ............................................................................................... 25

2-5 Peripherals..................................................................................................... 28

2-6 Power Management....................................................................................... 30

2-7 Save & Exit..................................................................................................... 32

Chapter 3 Appendix ......................................................................................................33

3-1 Conguring SATA Hard Drive(s)..................................................................... 33

3-2 Drivers Installation.......................................................................................... 35

Regulatory Statements.............................................................................................. 36

Contact Us ................................................................................................................ 40

- 4 -

The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

Box Contents

5GA-H97M-Gaming 3 motherboard

5Motherboard driver disk 5Two SATA cables

5User's Manual 5I/O Shield

GA-H97M-Gaming 3 Motherboard Layout

F_USB30

KB_MS_USB3

CPU_FAN

LGA1150

ATX

AUDIO

DDR3_4

DDR3_2

DDR3_3

DDR3_1

BAT

ATX_12V

Intel®H97

CLR_CMOS

M_BIOS

B_BIOS

VGA

DVI

USB30

LAN

PCIEX16

PCIEX1_1

PCIEX1_2

PCIEX4

SYS_FAN2

SYS_FAN1

GA-H97M-Gaming 3

R_USB DP

HDMI

SPDIF

F_PANEL

SYS_FAN3F_USB1

F_USB2

F_AUDIO

SPDIF_O

COM LPT

SATA3 1 3 5

0 2 4

iTE®

Super I/O

Qualcomm®

Atheros Killer

E2201 LAN

CODEC

- 5 -

GA-H97M-Gaming 3 Motherboard Block Diagram

For detailed product information/limitation(s), refer to "1-2 Product Specications."

iTE®

Super I/O

PS/2 KB/Mouse

LGA1150

CPU

Intel®H97

PCIe CLK

(100 MHz)

PCIe CLK

(100 MHz)

CPU CLK+/- (100 MHz)

1 PCI Express x16

COM

LPT

8 USB 2.0/1.1

6 USB 3.0/2.0

DDR3 1600/1333 MHz

PCI Express Bus

6 SATA 6Gb/s

HDMI

DVI-D

D-Sub

DMI 2.0

FDI

x16

LPC

Bus

1 PCI Express x1

Center/Subwoofer Speaker Out

Line Out

MIC

Line In

S/PDIF Out

Side Speaker Out

Rear Speaker Out

CODEC

Dual Channel Memory

Dual BIOS

DisplayPort

LAN

RJ45

Qualcomm®

Atheros Killer

E2201 LAN

1 PCI Express x1

1 PCI Express x4

Switch

- 6 -

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keep your hands dry and rst touch a metal object to eliminate static electricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before unplugging the power supply cable from the motherboard, make sure the power supply

has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

- 7 -

1-2 ProductSpecications

CPU Support for Intel®Core™i7 processors/Intel®Core™i5 processors/

Intel®Core™i3 processors/Intel®Pentium®processors/

Intel®Celeron®processors in the LGA1150 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset Intel®H97 Express Chipset

Memory 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

Support for DDR3 1600/1333 MHz memory modules

Support for non-ECC memory modules

Support for Extreme Memory Prole (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and

memory modules.)

Onboard

Graphics

Integrated Graphics Processor:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60Hz

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60Hz

* The DVI-D port does not support D-Sub connection by adapter.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@24Hz or

2560x1600@60Hz

* Support for HDMI 1.4a version.

- 1 x DisplayPort, supporting a maximum resolution of 4096x2160@24Hz or

3840x2160@60Hz

* Support for DisplayPort 1.2 version.

- Support for up to 3 displays at the same time

- Maximum shared memory of 1 GB

Audio

Realtek®ALC1150 codec

Support for Sound Blaster X-Fi MB3

High Denition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN Qualcomm® Atheros Killer E2201 LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

(The PCIEX16 slot conforms to PCI Express 3.0 standard.)

1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with the PCIEX1_2 slot. The PCIEX1_2 slot will

become unavailable when a PCIe x4 expansion card is installed.

* When installing a x8 or above card in the PCIEX4 slot, make sure to set PCIE

Slot Conguration (PCH) in BIOS Setup to x4. (Refer to Chapter 2, "BIOS Setup,"

"Peripherals," for more information.)

2 x PCI Express x1 slots

(The PCIEX4 and PCIEX1 slots conform to PCI Express 2.0 standard.)

Multi-Graphics

Technology

Support for 2-Way AMD CrossFire™technology

Storage Interface Chipset:

- 6 x SATA 6Gb/s connectors

- Support for RAID 0, RAID 1, RAID 5, and RAID 10

- 8 -

USB Chipset:

- 6 x USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through

the internal USB header)

- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through

the internal USB headers)

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

6 x SATA 6Gb/s connectors

1 x CPU fan header

3 x system fan headers

1 x front panel header

1 x front panel audio header

1 x S/PDIF Out header

1 x USB 3.0/2.0 header

2 x USB 2.0/1.1 headers

1 x serial port header

1 x parallel port header

1 x Clear CMOS jumper

Back Panel

Connectors

1 x PS/2 keyboard/mouse port

1 x D-Sub port

1 x DVI-D port

1 x optical S/PDIF Out connector

1 x HDMI port

1 x DisplayPort

4 x USB 3.0/2.0 ports

4 x USB 2.0/1.1 ports

1 x RJ-45 port

 6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side

Speaker Out, Line In, Line Out, Mic In)

I/O Controller iTE®I/O Controller Chip

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU/System overheating warning

CPU/System fan fail warning

CPU/System fan speed control

* Whether the fan speed control function is supported will depend on the cooler you

install.

BIOS 2 x 64 Mbit ash

Use of licensed AMI UEFI BIOS

Support for DualBIOS™

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for APP Center

* Available applications in APP Center may differ by motherboard model. Supported

functions of each application may also differ depending on motherboard

specications.

- @BIOS

- EasyTune

- EZ Setup

- Fast Boot

- Game Controller

- 9 -

1-3 Installing the CPU

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•Set the CPU host frequency in accordance with the CPU specications. It is not recommended

that the system bus frequency be set beyond hardware specications since it does not meet the

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications, please do so according to your hardware specications including the CPU, graphics

card, memory, hard drive, etc.

Unique Features - ON/OFF Charge

- Smart TimeLock

- Smart Recovery 2

- System Information Viewer

- USB Blocker

Support for Q-Flash

Support for Smart Switch

Support for Xpress Install

Bundled

Software

Norton® Internet Security (OEM version)

Intel®Rapid Start Technology

Intel®Smart Connect Technology

Intel®Smart Response Technology

Operating

System Support for Windows 8.1/8/7

Form Factor Micro ATX Form Factor; 24.4cm x 22.5cm

* GIGABYTE reserves the right to make any changes to the product specications and product-related information without

prior notice.

* Please visit the Support & Downloads\Utility page on GIGABYTE's website to check the supported operating system(s)

for the software listed in the "Unique Features" and "Bundled Software" columns.

Installing the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Notch

Alignment KeyAlignment Key Notch

LGA1150 CPU

LGA1150 CPU Socket

Pin One Corner of the CPU Socket Triangle Pin One Marking on the CPU

Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load plate

automatically during the process of re-engaging the lever after you insert the CPU.

- 10 -

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

DualChannelMemoryConguration

This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology. After the

memory is installed, the BIOS will automatically detect the specications and capacity of the memory. Enabling

Dual Channel memory mode will double the original memory bandwidth.

The four DDR3 memory sockets are divided into two channels and each channel has two memory sockets as

following:

Channel A: DDR3_2, DDR3_4

Channel B: DDR3_1, DDR3_3

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.

2. When enabling Dual Channel mode with two or four memory modules, it is recommended that memory

of the same capacity, brand, speed, and chips be used and installed in the same colored DDR3

sockets. For optimum performance, when enabling Dual Channel mode with two memory modules,

we recommend that you install them in the DDR3_1 and DDR3_2 sockets.

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

1-6 Back Panel Connectors

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

USB 3.0/2.0 Port

The USB 3.0 port supports the USB 3.0 specication and is compatible to the USB 2.0/1.1 specication.

Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB ash drive and etc.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200@60Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports

D-Sub connection to this port.

•When removing the cable connected to a back panel connector, rst remove the cable from your

device and then remove it from the motherboard.

•When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent

an electrical short inside the cable connector.

Inhaltsverzeichnis

Andere Gigabyte Hauptplatine Handbücher

Gigabyte

Gigabyte GA-6ZM7A Bedienungsanleitung

Gigabyte

Gigabyte GA-Z97X-UD5H-BK Bedienungsanleitung

Gigabyte

Gigabyte MD50-LS0 Bedienungsanleitung

Gigabyte

Gigabyte H610M H DDR4 Bedienungsanleitung

Gigabyte

Gigabyte GA-Z270X-Gaming Bedienungsanleitung

Gigabyte

Gigabyte GA-F2A88XM-DS2 Bedienungsanleitung

Gigabyte

Gigabyte GA-AB350M-HD3 Bedienungsanleitung

Gigabyte

Gigabyte GA-8IAX Bedienungsanleitung

Gigabyte

Gigabyte 6WMM Series Bedienungsanleitung

Gigabyte

Gigabyte GA-H61M-S2P-B3 Bedienungsanleitung

Gigabyte

Gigabyte GA-8IDXR-A Bedienungsanleitung

Gigabyte

Gigabyte 12ME-Z17HD3P-1003R Bedienungsanleitung

Gigabyte

Gigabyte GA-990X-Gaming SLI Bedienungsanleitung

Gigabyte

Gigabyte GA-P55-UD3L Bedienungsanleitung

Gigabyte

Gigabyte GA-GC220 Bedienungsanleitung

Gigabyte

Gigabyte B360M D3P Bedienungsanleitung

Gigabyte

Gigabyte X570 GAMING X Bedienungsanleitung

Gigabyte

Gigabyte GA-8I915MD-GV Bedienungsanleitung

Gigabyte

Gigabyte B560M AORUS PRO AX Bedienungsanleitung

Gigabyte

Gigabyte GA-F2A88XM-DS2P Bedienungsanleitung

Gigabyte

Gigabyte B650 AORUS ELITE AX Bedienungsanleitung

Gigabyte

Gigabyte GA-8VD667 Bedienungsanleitung

Gigabyte

Gigabyte GA-A320M-S2H V2 Bedienungsanleitung

Gigabyte

Gigabyte GA-X79-UD3 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung