Gigabyte GA-M68MT-D3P Bedienungsanleitung

GA-M68MT-D3P

GA-M68MT-S2P

User's Manual

Rev. 3101

12ME-M68MT2P-3101R

Motherboard

GA-M68MT-D3P

GA-M68MT-S2P

Dec. 31, 2010

Motherboard

GA-M68MT-D3P/GA-M68MT-S2P

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE

without prior notice. No part of this manual may be reproduced, copied, translated, transmitted,

or published in any form or by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"

means the revision of the motherboard is 1.0. Check your motherboard revision before updating

motherboard BIOS, drivers, or when looking for technical information.

Example:

- 4 -

Table of Contents

GA-M68MT-D3P/GA-M68MT-S2P Motherboard Layout .................................................5

GA-M68MT-D3P/GA-M68MT-S2P Motherboard Block Diagram.....................................6

Chapter 1 Hardware Installation .....................................................................................7

1-1 Installation Precautions.................................................................................... 7

1-2 ProductSpecications...................................................................................... 8

1-3 Installing the CPU and CPU Cooler ............................................................... 10

1-3-1 Installing the CPU...................................................................................................10

1-4 Installing the Memory..................................................................................... 10

1-4-1 DualChannelMemoryConguration .....................................................................11

1-5 Installing an Expansion Card ......................................................................... 11

1-6 Back Panel Connectors.................................................................................. 11

1-7 Internal Connectors........................................................................................ 13

Chapter 2 BIOS Setup ..................................................................................................20

2-1 Startup Screen ............................................................................................... 20

2-2 The Main Menu .............................................................................................. 20

2-3 MB Intelligent Tweaker(M.I.T.)........................................................................ 21

2-4 Standard CMOS Features.............................................................................. 23

2-5 Advanced BIOS Features .............................................................................. 25

2-6 Integrated Peripherals.................................................................................... 27

...........................................................................................................................

2-7 Power Management Setup............................................................................. 29

2-8 PnP/PCICongurations ................................................................................. 31

2-9 PC Health Status............................................................................................ 31

2-10 Load Fail-Safe Defaults.................................................................................. 32

2-11 Load Optimized Defaults................................................................................ 33

2-12 Set Supervisor/User Password ...................................................................... 33

2-13 Save & Exit Setup .......................................................................................... 34

2-14 Exit Without Saving........................................................................................ 34

Chapter 3 Drivers Installation........................................................................................35

Installing Chipset Drivers .......................................................................................... 35

Chapter 4 Appendix ......................................................................................................35

ConguringSATAHardDrive(s)................................................................................ 35

- 5 -

GA-M68MT-D3P/GA-M68MT-S2P Motherboard Layout

KB_MS

CPU_FAN

Socket AM3+

ATX

GA-M68MT-D3P

GA-M68MT-S2P

F_AUDIO

AUDIO

PCIEX16

DDR3_1

DDR3_2

ATX_12V

NVIDIA® GeForce

7025/nForce 630a

SATA2_2

SATA2_3

SATA2_1

SATA2_0

COMA

CODEC

BAT

VGA

USB

LAN

PCI

F_USB1

M_BIOS

F_PANEL

Realtek

RTL8211CL

B_BIOS

iTE

IT8720

F_USB2

PCIEX1_1

R_USB

CLR_CMOS

SYS_FAN

PCIEX1_2

F_USB3

LPT

"*" The GA-M68MT-D3P adopts All-Solid Capacitor design.

Box Contents

GA-M68MT-D3P or GA-M68MT-S2P motherboard

Motherboard driver disk User's Manual

I/O Shield Two SATA cables

The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

- 6 -

GA-M68MT-D3P/GA-M68MT-S2P Motherboard Block Diagram

AM3+/AM3 CPU

Hyper Transport Bus

NVIDIA® GeForce

7025/nForce 630a

1PCI

PCI Bus

PCI CLK

(33 MHz)

PCIe CLK

(100 MHz)

PCI Express Bus

iTE

IT8720

CPU CLK+/- (200 MHz)

Dual BIOS

COM Port

LPC

Bus

2 PCI Express x1

PCIe CLK

(100 MHz)

1 PCI Express x16

4 SATA 3Gb/s

LAN RJ45

PCI Express x16

PS/2 KB/Mouse

10 USB 2.0/1.1

Line Out

MIC

Line In

CODEC

1 D-Sub

Realtek

RTL8211CL

LPT Port

Dual Channel Memory

DDR3 1600/1333/1066/800 MHz

- 7 - Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can

become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read

the user's manual and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic com-

ponents such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power sup-

ply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your hard-

ware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to sys-

tem components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

Chapter 1 Hardware Installation

Hardware Installation - 8 -

1-2 ProductSpecications

CPU AM3+ Socket:

- AMD AM3+ FX processors

* You must install an external graphics card if you want to install Windows XP on your

AM3+ CPU-based system.

- AMD AM3 Phenom™II processors/AMD Athlon™II processors

(Go to GIGABYTE's website for the latest CPU support list.)

Hyper Transport

Bus 2000 MT/s

Chipset NVIDIA®GeForce 7025/nForce 630a

Memory 2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory

* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than 4 GB.

Dual channel memory architecture

Support for DDR3 1600/1333/1066/800 MHz memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Chipset:

- 1 x D-Sub port

Audio Realtek ALC888B/889 codec

HighDenitionAudio

2/4/5.1/7.1-channel

  * Tocongure7.1-channelaudio,youhavetouseanHDfrontpanelaudiomodule

and enable the multi-channel audio feature through the audio driver.

LAN 1 x Realtek RTL8211CL chip (10/100/1000 Mbit)

Expansion Slots 1 x PCI Express x16 slot, running at x16

2 x PCI Express x1 slots

1 x PCI slot

Storage Interface Chipset:

- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices

- Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD

USB Chipset:

- Up to 10 USB 2.0/1.1 ports (4 ports on the back panel, 6 ports available

through the internal USB headers)

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 4-pin ATX 12V power connector

4 x SATA 3Gb/s connectors

1 x CPU fan header

1 x system fan header

1 x front panel header

1 x front panel audio header

3 x USB 2.0/1.1 headers

1 x parallel port connector

1 x clearing CMOS jumper

- 9 - Hardware Installation

Back Panel

Connectors

1 x PS/2 keyboard port

1 x PS/2 mouse port

1 x D-Sub port

1 x serial port

4 x USB 2.0/1.1 ports

1 x RJ-45 port

3 x audio jacks (Line In/Line Out/Microphone)

I/O Controller iTE IT8720 chip

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU/System overheating warning

CPU/System fan fail warning

CPU fan speed control

* Whether the CPU/system fan speed control function is supported will depend on

the CPU/system cooler you install.

BIOS 2x16Mbitash

Use of licensed AWARD BIOS

Support for DualBIOS™

PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Unique Features Support for @BIOS

Support for Q-Flash

Support for Xpress BIOS Rescue

Support for Download Center

Support for Xpress Install

Support for Xpress Recovery2

Support for EasyTune

* Available functions in EasyTune may differ by motherboard model.

Support for Auto Green

Support for ON/OFF Charge

Bundled

Software Norton Internet Security (OEM version)

Operating

System Support for Microsoft®Windows 7/Vista/XP

Form Factor Micro ATX Form Factor; 24.4cm x 20.5cm

*GIGABYTE reserves the right tomake any changes tothe product specications and product-relatedinformation

without prior notice.

Hardware Installation - 10 -

1-3 Installing the CPU and CPU Cooler

1-3-1 Installing the CPU

Locate the pin one (denoted by a small triangle) of the CPU socket and the CPU.

Read the following guidelines before you begin to install the CPU:

• Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

• Always turn off the computer and unplug the power cord from the power outlet before installing

the CPU to prevent hardware damage.

• Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

• Apply an even and thin layer of thermal grease on the surface of the CPU.

• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and dam-

age of the CPU may occur.

• SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graph-

ics card, memory, hard drive, etc.

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing

the memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direc-

tion. If you are unable to insert the memory, switch the direction.

AM3+/AM3 CPU

A Small Triangle Marking

Denotes CPU Pin One

AM3+ Socket

A Small Triangle Mark

Denotes Pin One of the

Socket

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Gigabyte Hauptplatine Handbücher

Gigabyte

Gigabyte GA-EP45C-DS3 Bedienungsanleitung

Gigabyte

Gigabyte GA-X38-DQ6 Bedienungsanleitung

Gigabyte

Gigabyte GS-R11U4S Bedienungsanleitung

Gigabyte

Gigabyte GA-Z97-HD3P Bedienungsanleitung

Gigabyte

Gigabyte GA-MA790X-UD4P Bedienungsanleitung

Gigabyte

Gigabyte GA-X79-UP4 Bedienungsanleitung

Gigabyte

Gigabyte GA-7NCSV-RH Bedienungsanleitung

Gigabyte

Gigabyte B650I AX Bedienungsanleitung

Gigabyte

Gigabyte GA-G41MT-USB3 Bedienungsanleitung

Gigabyte

Gigabyte 6VX7-4X Bedienungsanleitung

Gigabyte

Gigabyte GA-8VM800PMD-775-RH Bedienungsanleitung

Gigabyte

Gigabyte GA-H61M-S2P-B3 Bedienungsanleitung

Gigabyte

Gigabyte GA-F2A55M-HD2 Bedienungsanleitung

Gigabyte

Gigabyte GA-N680SLI-DQ6 Bedienungsanleitung

Gigabyte

Gigabyte GA-N3050N-D3H Bedienungsanleitung

Gigabyte

Gigabyte 6BNZ Bedienungsanleitung

Gigabyte

Gigabyte B360M D3H Bedienungsanleitung

Gigabyte

Gigabyte GA-M52L-S3 Bedienungsanleitung

Gigabyte

Gigabyte GA-Z77-HD3 Bedienungsanleitung

Gigabyte

Gigabyte GA-8I865GVMK-775 Bedienungsanleitung

Gigabyte

Gigabyte GA-7PCSL Bedienungsanleitung

Gigabyte

Gigabyte GA-Z77-D3H Bedienungsanleitung

Gigabyte

Gigabyte GA-Z270P-D3 Bedienungsanleitung

Gigabyte

Gigabyte MB12-CE0 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung