Gigabyte GA-P61A-D3 Bedienungsanleitung

GA-P61A-D3

User's Manual

Rev. 3001

12ME-P61AD3-3001R

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or

by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means

the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard

BIOS, drivers, or when looking for technical information.

Example:

Motherboard

GA-P61A-D3

Jan. 23, 2014

Motherboard

GA-P61A-D3

- 3 -

Table of Contents

GA-P61A-D3 Motherboard Layout..................................................................................4

GA-P61A-D3 Motherboard Block Diagram .....................................................................5

Chapter 1 Hardware Installation .....................................................................................6

1-1 Installation Precautions ................................................................................... 6

1-2 ProductSpecications..................................................................................... 7

1-3 Installing the CPU and CPU Cooler................................................................. 9

1-4 Installing the Memory ...................................................................................... 9

1-5 Installing an Expansion Card......................................................................... 10

1-6 Back Panel Connectors ................................................................................. 10

1-7 Internal Connectors ........................................................................................11

Chapter 2 BIOS Setup..................................................................................................16

2-1 Startup Screen............................................................................................... 16

2-2 M.I.T. .............................................................................................................. 17

2-3 System Information........................................................................................ 21

2-4 BIOS Features ............................................................................................... 22

2-5 Peripherals..................................................................................................... 25

2-6 Power Management....................................................................................... 27

2-7 Save & Exit .................................................................................................... 29

Chapter 3 Appendix......................................................................................................30

Drivers Installation.................................................................................................... 30

Regulatory Statements............................................................................................. 31

Contact Us ................................................................................................................ 32

- 4 -

GA-P61A-D3 Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

Box Contents

5GA-P61A-D3 motherboard

5Motherboard driver disk 5Two SATA cables

5User's Manual 5I/O Shield

KB_MS

COAXIAL

CPU_FAN

LGA1155 ATX

F_AUDIO

AUDIO

DDR3_1

DDR3_2

F_USB30

BAT

F_PANEL

Intel®H61

CODEC

CLR_CMOS

M_BIOS

B_BIOS

COMA

LPT

USB_LAN

PCIe to PCI

Bridge

PCIEX16

PCIEX1_1

PCI1

PCI2

PCI3

PCIEX1_2

SPDIF_O SYS_FAN2 F_USB2 F_USB1

SYS_FAN1

PWR_FAN

Atheros

GbE LAN

VIA®

VL805

Marvell®

88SE9172

GA-P61A-D3

R_USB30

SATA2 GSATA3

3 1

2 0 5

ATX_12V_2X4

iTE®

Super I/O

- 5 -

GA-P61A-D3 Motherboard Block Diagram

Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications."

PS/2 KB/Mouse

LGA1155

CPU

Intel®H61

PCI Express Bus

CPU CLK+/- (100 MHz)

1 PCI Express x16

Dual BIOS

COM

LPT

6 USB 2.0/1.1

LPC

Bus

DDR3 1333/1066/800 MHz

4 SATA 3Gb/s

DMI 2.0

x16

Dual Channel Memory

LAN

RJ45

Atheros GbE

LAN

3 PCI

PCI Bus

PCI CLK

(33 MHz)

PCIe to PCI

Bridge

x1 x1

2 PCI Express x1 2 SATA 6Gb/s

4 USB 3.0/2.0

x1x1

Marvell®

88SE9172

VIA®

VL805

PCIe CLK

(100 MHz)

Line Out (Front Speaker Out)

MIC (Center/Subwoofer Speaker Out)

Line In (Rear Speaker Out)

CODEC

S/PDIF Out

iTE®

Super I/O

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before unplugging the power supply cable from the motherboard, make sure the power supply

has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

- 6 -

1-2 ProductSpecications

CPU Support for Intel®Core™i7 processors/Intel®Core™i5 processors/

Intel®Core™i3 processors/Intel®Pentium®processors/Intel®Celeron®processors

in the LGA1155 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset Intel®H61 Express Chipset

Memory 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

Support for DDR3 1333/1066/800 MHz memory modules

Support for non-ECC memory modules

SupportforExtremeMemoryProle(XMP)memorymodules

* To support XMP memory, you must install an Intel 22nm (Ivy Bridge) CPU.

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Audio Realtek®ALC887 codec

HighDenitionAudio

2/4/5.1/7.1-channel

* Tocongure7.1-channelaudio,youhavetouseanHDfrontpanelaudiomodule

and enable the multi-channel audio feature through the audio driver.

Support for S/PDIF Out

LAN Atheros GbE LAN chip (10/100/1000 Mbit)

Expansion Slots 1 x PCI Express x16 slot, running at x16

(The PCI Express x16 slot conforms to PCI Express 3.0 standard.)

* Whether PCI Express 3.0 is supported depends on CPU and graphics card

compatibility.

2 x PCI Express x1 slots

(All PCI Express x1 slots conform to PCI Express 2.0 standard.)

3 x PCI slots

Storage Interface Chipset:

- 4 x SATA 3Gb/s connectors (SATA2 0~3)

Marvell®88SE9172 chip:

- 2 x SATA 6Gb/s connectors (GSATA3 4~5)

- Support for RAID 0 and RAID 1

USB Chipset:

- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through

the internal USB headers)

VIA®VL805 chip:

- 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through

the internal USB header)

* Be sure to connect your USB device(s) to the USB 2.0/1.1 ports before the USB 3.0

driver is installed. (refer to the labels in section 1-6, "Back Panel Connectors.")

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

- 7 -

Internal

Connectors

2 x SATA 6Gb/s connectors

4 x SATA 3Gb/s connectors

1 x CPU fan header

2 x system fan headers

1 x power fan header

1 x front panel header

1 x front panel audio header

1 x S/PDIF Out header

1 x USB 3.0/2.0 header

2 x USB 2.0/1.1 headers

1xClearCMOSjumper

Back Panel

Connectors

1 x PS/2 mouse port

1 x PS/2 Keyboard port

1 x parallel port

1 x serial port

1 x coaxial S/PDIF Out connector

2 x USB 3.0/2.0 ports

2 x USB 2.0/1.1 ports

1 x RJ-45 port

3xaudiojacks(LineIn,LineOut,MicIn)

I/O Controller iTE®I/O Controller Chip

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/System/Power fan speed detection

CPU overheating warning

CPU/System/Power fan fail warning

CPU/System fan speed control

* Whether the fan speed control function is supported will depend on the cooler you install.

BIOS 2x32Mbitash

Use of licensed AMI UEFI BIOS

Support for DualBIOS™

PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

Unique Features Support for @BIOS

Support for Q-Flash

Support for EasyTune

* Available functions in EasyTune may differ by motherboard model.

Support for ON/OFF Charge

Bundled

Software Norton®Internet Security (OEM version)

Operating

System Support for Windows 8.1/8/7/Vista/XP

Form Factor ATX Form Factor; 30.5cm x 19.0cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

* Please visit the Support & Downloads\Utility page on GIGABYTE's website to check the supported operating system(s)

for the software listed in the "Unique Features" and "Bundled Software" columns.

- 8 -

1-3 Installing the CPU and CPU Cooler

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card, memory, hard drive, etc.

Installing the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Alignment

Key

Alignment

Key

LGA1155 CPU Socket

Pin One Corner of the CPU Socket

Notch

LGA1155 CPU

Triangle Pin One Marking on the CPU

Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load

plate automatically during the process of re-engaging the lever after you insert the CPU.

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

DualChannelMemoryConguration

This motherboard provides two DDR3 memory sockets and supports Dual Channel Technology. After the memory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingDual

Channel memory mode will double the original memory bandwidth.

The two DDR3 memory sockets are divided into two channels and each channel has one memory socket as

following:

Channel A: DDR3_1

Channel B: DDR3_2

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.

2. When enabling Dual Channel mode with two memory modules, it is recommended that memory of

the same capacity, brand, speed, and chips be used for optimum performance.

- 9 -

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

1-6 Back Panel Connectors

PS/2 Keyboard and PS/2 Mouse Port

Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard.

Parallel Port

Use the parallel port to connect devices such as a printer, scanner and etc. The parallel port is also called

a printer port.

Serial Port

Use the serial port to connect devices such as a mouse, modem or other peripherals.

Coaxial S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital coaxial audio.

Before using this feature, ensure that your audio system provides a coaxial digital audio in connector.

USB 3.0/2.0 Port

TheUSB3.0portsupportstheUSB3.0specicationandiscompatibletotheUSB2.0/1.1specication.

Use this port for USB devices Use this port for USB devices such as a USB keyboard/mouse, USB printer,

USBashdriveandetc.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:

Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

USB 2.0/1.1 Port

TheUSB portsupportsthe USB2.0/1.1 specication.Use thisportfor USBdevices suchasa USB

keyboard/mouse,USBprinter,USBashdriveandetc.

Line In Jack (Blue)

Thedefaultlineinjack.Usethisaudiojackforlineindevicessuchasanopticaldrive,walkman,etc.

Line Out Jack (Green)

Thedefaultlineoutjack.Usethisaudiojackforaheadphoneor2-channelspeaker.Thisjackcanbeused

toconnectfrontspeakersina4/5.1/7.1-channelaudioconguration.

- 10 -

Andere Handbücher für GA-P61A-D3

Inhaltsverzeichnis

Andere Gigabyte Hauptplatine Handbücher

Gigabyte

Gigabyte GA-J3455N-D3H Bedienungsanleitung

Gigabyte

Gigabyte GA-TG965MP-RH Bedienungsanleitung

Gigabyte

Gigabyte GA-P31-ES3G Bedienungsanleitung

Gigabyte

Gigabyte GA-A320M-DS2 Bedienungsanleitung

Gigabyte

Gigabyte GA-6VTXE Bedienungsanleitung

Gigabyte

Gigabyte GA-78LMT-USB3 Bedienungsanleitung

Gigabyte

Gigabyte GA-990FX Bedienungsanleitung

Gigabyte

Gigabyte GA-990XA-UD3 Bedienungsanleitung

Gigabyte

Gigabyte GA-A75M-D2H Bedienungsanleitung

Gigabyte

Gigabyte GA-6FASV1 Bedienungsanleitung

Gigabyte

Gigabyte GA-880GA-UD3H Bedienungsanleitung

Gigabyte

Gigabyte MX33-BS0 Bedienungsanleitung

Gigabyte

Gigabyte GA-IMB310N Bedienungsanleitung

Gigabyte

Gigabyte G1.Sniper2 Bedienungsanleitung

Gigabyte

Gigabyte MD61-SC2 Bedienungsanleitung

Gigabyte

Gigabyte GA-N3150M-D3P Bedienungsanleitung

Gigabyte

Gigabyte GA-P61A-D3 Bedienungsanleitung

Gigabyte

Gigabyte GA-Z270XP-SLI Bedienungsanleitung

Gigabyte

Gigabyte GA-8ST667 Bedienungsanleitung

Gigabyte

Gigabyte GA-B250M-Gaming 3 Bedienungsanleitung

Gigabyte

Gigabyte GA-P43-ES3G Bedienungsanleitung

Gigabyte

Gigabyte B450 GAMING X Bedienungsanleitung

Gigabyte

Gigabyte 6WMM Series Bedienungsanleitung

Gigabyte

Gigabyte H310N 2.0 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung