Gigabyte PC64 Bedienungsanleitung

PC64

Rev. A+

System Board

Users Manual

40800950

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose.The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Microsoft®MS-DOS®, WindowsTM, Windows®95 and Windows®98

are registered trademarks of Microsoft Corporation. Intel®, Pentium®

II, and Pentium®III are registered trademarks of Intel Corporation.

Award is a registered trademark of Award Software, Inc. Other

trademarks and registered trademarks of products appearing in this

manual are the properties of their respective holders.

Caution:

Danger of explosion if battery incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer.

Dispose of used batteries according to the battery manufacturers

instructions.

FCC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and the receiver.

 Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

 Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

2. Shielded interface cables must be used in order to comply with

the emission limits.

Table of Contents

Chapter 1 - Introduction

1.1 Features and Specifications..................................................................................

1.2 Package Checklist.........................................................................................................

Chapter 2 - Hardware Installation

2.1 System Board Layout .............................................................................................

2.2 System Memory.............................................................................................................

2.3 Processor Installation.................................................................................................

2.4 Jumper Settings for Clearing CMOS Data..........................................

2.5 Jumper Settings for Wake-On-Keyboard/Mouse....................................

2.6 Jumper Settings for the Systems Beep Message...........................

2.7 Ports and Connectors.............................................................................................

Chapter 3 - Award BIOS Setup Utility

3.1 The Basic Input/Output System.....................................................................

3.1.1 Standard CMOS Features.............................................................

3.1.2 Advanced BIOS Features..............................................................

3.1.3 Advanced Chipset Features ......................................................

3.1.4 Integrated Peripherals.........................................................................

3.1.5 Power Management Setup............................................................

3.1.6 PnP/PCI Configurations....................................................................

3.1.7 System Health Monitor.....................................................................

3.1.8 CPU Frequency Control..................................................................

3.1.9 Load Fail-Safe Defaults.....................................................................

3.1.10 Load Optimized Defaults..............................................................

3.1.11 Set Supervisor Password...............................................................

3.1.12 Set User Password..............................................................................

3.1.13 Save & Exit Setup.................................................................................

3.1.14 Exit Without Saving..............................................................................

Chapter 4 - Supported Softwares

4.1 Desktop Management Interface.....................................................................

4.2 Hardware Doctor Utility........................................................................................

4.3 Intel 820 INF Update Utility for Windows95/98....................

4.4 IDE, USB and Firmware Hub Patch Utility for Intel 820........

4.5 Sound Driver......................................................................................................................

4.6 Aureal Vor tex Player for Windows 95/98............................................

4.7 Intel Ultra ATA Storage Device for Windows 98/NT................

4.8 Microsoft DirectX 6.1 for Windows 95/98.........................................

4.9 Drivers and Utilities Installation Notes.....................................................

Appendix A - Using the Suspend to RAM

Function

A.1 Using the Suspend to RAM Function........................................................

Appendix B - System Error Messages

B.1 POST Beep.......................................................................................................................

B.2 Error Messages..............................................................................................................

Appendix C - Troubleshooting

C.1 Troubleshooting Checklist....................................................................................

Introduction

1.1 Features and Specifications

1.1.1 Features

Chipset

 Intel®820 AGPset

Processor

The system board is equipped with a 242-pin Slot 1 processor slot

for installing an Intel PentiumII or PentiumIII processor. It is also

equipped with a switching voltage regulator that automatically

detects 1.30V to 3.5V.

 Pentium®III 133MHz FSB (533MHz-733MHz) or 100MHz FSB

(450MHz-700MHz) processor

 Pentium®II 100MHz FSB (350MHz-450MHz) processor

System Memory

 Two 184-pin SRIMM sockets

 Single Direct Rambus channel optimized for 300MHz, 356MHz

and 400MHz operations; up to 1600MB/sec. bandwidth

 Supports maximum of 32 Direct RDRAM devices

 ECC supported

Chapter 1 - Introduction

Maximum

256MB

512MB

1GB

Increments

8MB

16MB

32MB

RDRAM Technology

64Mbit/72Mbit

128Mbit/144Mbit

256Mbit/288Mbit

Please refer to System Memory in chapter 2 for more information.

Introduction

Expansion Slots

The system board is equipped with 1 universal AGP slot. AGP is an

interface designed to support high performance 3D graphics cards. It

utilizes a dedicated pipeline to access system memory for texturing,

z-buffering and alpha blending.The universal AGP slot supports AGP

2x with up to 533MB/sec. bandwidth and AGP 4x with up to

1066MB/sec. bandwidth for 3D graphics applications. AGP in this

system board will deliver faster and better graphics to your PC.

The system board is also equipped with 5 dedicated PCI slots and

1 AMR slot. AMR (Audio/Modem Riser) is an interface designed for

installing an audio riser card, modem riser card or audio/modem riser

card that is compliant to the AMR specification.

Onboard PCI Audio Features (Aureal AU8810)

The system board uses Aureal AU8810 which provides a powerful

PCI audio onboard.

 Supports Microsoft®DirectSound/DirectSound 3D

 256-voice wavetable with DLS 1.0

 Supports A3D positional audio effects

 16 channels of high quality sample rate conversion

 Supports Sound Blaster, Sound Blaster Pro emulation and AdLib,

OPL 2/3 FM synthesis

 PCI 2.2 compliant and AC'97 2.1 interface compliant

ATX Double Deck Ports (PC 99 color-coded connectors)

 Two USB ports

 Two NS16C550A-compatible DB-9 serial ports

 One SPP/ECP/EPP DB-25 parallel port

 One mini-DIN-6 PS/2 mouse port

 One mini-DIN-6 PS/2 keyboard port

 One game/MIDI port

 Three audio jacks: line-out, line-in and mic-in

Introduction

Connectors

 One connector for IrDA interface

 Two IDE connectors

 One floppy drive interface supports up to two 2.88MB floppy

drives

 One 20-pin ATX power supply connector

 One Wake-On-LAN connector

 One Wake-On-Ring connector

 CPU, chassis and second chassis fan connectors

 One opened chassis alarm connector

 Four internal audio connectors (video-in, AUX-in, CD-in and TAD)

 One thermal sensor connector for user customization

PCI Bus Master IDE Controller

 Two PCI IDE interfaces support up to four IDE devices

 Supports ATA/33 or ATA/66 hard drives

 PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)

 Bus mastering reduces CPU utilization during disk transfer

 Supports ATAPI CD-ROM, LS-120 and ZIP

IrDA Interface

The system board is equipped with an IrDA connector for wireless

connectivity between your computer and peripheral devices. It

supports peripheral devices that meet the IrDA or ASKIR standard.

USB Ports

The system board is equipped with two USB ports. USB allows

data exchange between your computer and a wide range of

simultaneously accessible external Plug and Play peripherals.

BIOS

 Award BIOS, Windows®95/98 Plug and Play compatible

 Supports SCSI sequential boot-up

 Flash EPROM for easy BIOS upgrades (4Mbit)

 Includes NCR 810 SCSI BIOS

 Supports DMI 2.0 function

 Monitors System Health status and failure alert

Introduction

Desktop Management Interface (DMI)

The system board comes with a DMI 2.0 built into the BIOS. The

DMI utility in the BIOS automatically records various information

about your system configuration and stores these information in the

DMI pool, which is a part of the system board's Plug and Play

BIOS. DMI, along with the appropriately networked software, is

designed to make inventory, maintenance and troubleshooting of

computer systems easier. Refer to chapter 4 for instructions on using

the DMI utility.

1.1.2 System Health Monitor Functions

The system board is capable of monitoring the following system

health conditions.

 Monitors processor/system temperature and overheat alarm

 One optional temperature sensor for user customization

 Monitors 5VSB/VBAT/1.5V/3.3V/5V/±12V/processor voltages

and failure alarm

 Monitors the fan speed of the processor fan, chassis fan and

second chassis fan; controls the fan speed of the processor and

chassis fans; and failure alarm

 Automatic fan on/off control

 Read back capability that displays temperature, voltage and fan

speed

 Opened chassis alarm

 Supports processor thermal diode output (real processor

temperature)

Refer to System Health Monitor in chapter 3 and Hardware

Doctor Utility in chapter 4 for more information.

1.1.3 Intelligence

Automatic CPU/Chassis Fan Off

The CPU and chassis fans will automatically turn off once the system

enters the Suspend mode.

Introduction

Dual Function Power Button

Depending on the setting in the Soft-Off By PWR-BTTN field of

the Power Management Setup, this switch will allow the system to

enter the Soft-Off or Suspend mode.

Wake-On-Ring

This feature allows the system that is in the Suspend mode or Soft

Power Off mode to wake-up/power-on to respond to calls coming

through an internal or external modem. Refer to Wake-On-Ring

Connector in chapter 2 for more information.

RTC Timer to Power-on the System

The RTC installed on the system board allows your system to

automatically power-on on the set date and time.

Wake-On-LAN Ready

The Wake-On-LAN function allows the network to remotely wake

up a Soft Power Down (Soft-Off) PC.Your LAN card must support

the remote wakeup function. Refer to Wake-On-LAN Connector in

chapter 2 for more information.

Important:

The 5VSB power source of your power supply must support a

minimum of 1.5A.

Wake-On-Keyboard/Wake-On-Mouse

This function allows you to use the keyboard or PS/2 mouse to

power-on the system. Refer to Jumper Settings for Wake-On-

Keyboard/Wake-On-Mouse in chapter 2 and Keyboard/Mouse

Power On in the Integrated Peripherals section in chapter 3 for

more information.

Important:

 The power button will not function once a keyboard

password has been set in the KB Power On Password

field of the Integrated Peripherals submenu. You must type

the correct password to power-on the system. If you forgot

the password, power-off the system and remove the

Inhaltsverzeichnis

Andere Gigabyte Hauptplatine Handbücher

Gigabyte

Gigabyte GS-R22PHE Bedienungsanleitung

Gigabyte

Gigabyte R112-X30 Bedienungsanleitung

Gigabyte

Gigabyte GA-5DXSL-RH Bedienungsanleitung

Gigabyte

Gigabyte GA-B250M-Gaming 3 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Gigabyte

Gigabyte GA-6WXM7(-E) Bedienungsanleitung

Gigabyte

Gigabyte GA-8I865G775-G Bedienungsanleitung

Gigabyte

Gigabyte MCH31AM Bedienungsanleitung

Gigabyte

Gigabyte GA-Z270-Phoenix Gaming Bedienungsanleitung

Gigabyte

Gigabyte GA-H61M-D1 Bedienungsanleitung

Gigabyte

Gigabyte C246N-WU2 Bedienungsanleitung

Gigabyte

Gigabyte GA-F2A75M-HD2 Bedienungsanleitung

Gigabyte

Gigabyte GA-G33M-S2L Bedienungsanleitung

Gigabyte

Gigabyte H370N WIFI Bedienungsanleitung

Gigabyte

Gigabyte GA-6VX7 Bedienungsanleitung

Gigabyte

Gigabyte GA-IMB1900TN Bedienungsanleitung

Gigabyte

Gigabyte MW51-HP0 Bedienungsanleitung

Gigabyte

Gigabyte GA-H61M-S1 Bedienungsanleitung

Gigabyte

Gigabyte GA-IMB310N Bedienungsanleitung

Gigabyte

Gigabyte GA-8IP775 Series Bedienungsanleitung

Gigabyte

Gigabyte GA-970A-DS3P Bedienungsanleitung

Gigabyte

Gigabyte GA-VT890P Bedienungsanleitung

Gigabyte

Gigabyte X299 UD4 Pro Bedienungsanleitung

Gigabyte

Gigabyte Z390 UD Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung