Gigabyte Z590I VISION D Bedienungsanleitung

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE's website.

Z590I VISION D

User's Manual

Rev. 1001

12ME-Z59VSI-1001R

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without prior

notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in

any form or by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"

means the revision of the motherboard is 1.0. Check your motherboard revision before updating

motherboard BIOS, drivers, or when looking for technical information.

Example:

- 3 -

Table of Contents

Z590I VISION D Motherboard Layout .............................................................................4

Z590I VISION D Motherboard Block Diagram.................................................................5

Chapter 1 Hardware Installation .....................................................................................6

1-1 Installation Precautions.................................................................................... 6

1-2 Product Specications...................................................................................... 7

1-3 Installing the CPU .......................................................................................... 10

1-4 Installing the Memory..................................................................................... 10

1-5 Installing an Expansion Card ......................................................................... 11

1-6 Back Panel Connectors.................................................................................. 11

1-7 Internal Connectors........................................................................................ 13

Chapter 2 BIOS Setup ..................................................................................................20

2-1 Startup Screen ............................................................................................... 20

2-2 The Main Menu .............................................................................................. 21

2-3 Smart Fan 6 .................................................................................................. 22

2-4 Favorites (F11) ............................................................................................... 24

2-5 Tweaker.......................................................................................................... 25

2-6 Settings .......................................................................................................... 31

2-7 System Info. ................................................................................................... 36

2-8 Boot................................................................................................................ 37

2-9 Save & Exit..................................................................................................... 40

Chapter 3 Appendix ......................................................................................................41

3-1 Conguring a RAID Set.................................................................................. 41

3-2 Installing Intel®Optane™Memory and Storage Management ........................ 42

3-3 Drivers Installation.......................................................................................... 44

Regulatory Notices.................................................................................................... 45

Contact Us ................................................................................................................ 48

Temperature sensor

- 4 -

Z590I VISION D Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

Box Contents

5Z590I VISION D motherboard 5Two SATA cables

5Motherboard driver disc 5M.2 screw(s)/M.2 standoff(s)

5User's Manual 5One antenna

5One RGB LED strip extension cable 5Three Fan power extension cables

U32_G2_G1

TYPEC_2

LGA1200

ATX

M2_WIFI

DDR4_A1

DDR4_B1

ATX_12V_2X4

Intel®Z590

CLR_CMOS

LED_C

M_BIOS

PCIEX16

F_USB

M2A_CPU

M2P_SB (Note)

F_PANEL

SPEAKER

F_U32G1

BAT

D_LED

SYS_FAN2

SYS_FAN1

CPU_FAN

iTE®

Super I/O

6080

SATA3

Intel®

GbE LAN

4 0

3 2

Z590I VISION D

(Note) The connector/chip is on the back of the motherboard.

SYS_FAN3

QFLASH_PLUS

QFLED

F_U32CG1

60 (Note)

80 (Note)

USB 2.0 Hub

BAT

U32_LAN

TYPEC_1

Intel®

Thunderbolt™ 4

Controller

E_AUDIO

LGA1200 CPU

DMI 3.0

eSPI

Bus

SPI

Bus

DDI

PCI Express 3.0 Bus

Line Out

MIC

CODEC

iTE®

Super I/O

2 USB 2.0/1.1

1 USB Type-C®,

with USB 3.2 Gen 1 support

2 USB Type-C®,

with USB 3.2 Gen 2 support

(or 2 Intel®Thunderbolt™4)

2 USB 3.2 Gen 2 Type A

6 USB 3.2 Gen 1

Intel®Z590

LAN

RJ45

Intel®

2.5GbE LAN

USB 2.0

Hub

BIOS

PCI Express 4.0 (Note)/3.0 Bus

1 PCI Express x16

M.2 Socket 3

(M2A_CPU)

x16

M.2 WIFI

4 SATA 6Gb/s

CPU CLK+/- (100~500 MHz)

DDR4 3200 (Note)/3000 (Note)/2933 (Note)/

2666/2400/2133 MHz

Switch

Intel®

Thunderbolt™4

Controller

Z590I VISION D Motherboard Block Diagram

(Note) Actual support may vary by CPU.

DisplayPort In

PCIe 3.0 Bus

M.2 Socket 3

(M2P_SB)

- 5 -

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keep your hands dry and rst touch a metal object to eliminate static electricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 6 -

1-2 ProductSpecications

CPU LGA1200 package:

- 11th Generation Intel®Core™i9 processors/Intel®Core™i7 processors/

Intel®Core™i5 processors

- 10th Generation Intel®Core™i9 processors/Intel®Core™i7 processors/

Intel®Core™i5 processors/Intel®Core™i3 processors/Intel®Pentium®

processors/Intel®Celeron®processors*

* Limited to processors with 4 MB Intel®Smart Cache, Intel®Celeron®G5xx5 family.

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset Intel®Z590 Express Chipset

Memory 11th Generation Intel®Core™i9/i7/i5 processors:

- Support for DDR4 3200/3000/2933/2666/2400/2133 MHz memory modules

10th Generation Intel®Core™i9/i7 processors:

- Support for DDR4 2933/2666/2400/2133 MHz memory modules

10th Generation Intel®Core™i5/i3/Pentium®/Celeron®processors:

- Support for DDR4 2666/2400/2133 MHz memory modules

2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity)

of system memory

Dual channel memory architecture

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Prole (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor+Intel®Thunderbolt™4 Controller:

- 2 x Intel®Thunderbolt™4 connectors (USB Type-C

ports), supporting DisplayPort

and Thunderbolt™video outputs and a maximum resolution of 5120x2880@60 Hz

with 24 bpp (via single display output)

* Because of the limited I/O resources of the PC architecture, the number of Thunderbolt

™

devices that can be used is dependent on the number of the PCI Express devices being

installed. (Refer to Chapter 1-7, "Back Panel Connectors," for more information.)

* Support for DisplayPort 1.4 version and HDCP 2.3.

(Graphics specications may vary depending on CPU support.)

Audio Realtek®ALC4080 codec

Support for DTS:X®Ultra

High Denition Audio

2-channel

LAN Intel®2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)

Wireless

Communication

Module

Intel®Wi-Fi 6 AX200

- WIFI a, b, g, n, ac, ax, supporting 2.4/5 GHz Dual-Band

- BLUETOOTH 5.1

- Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

* Actual data rate may vary depending on environment and equipment.

- 7 -

Expansion Slots 1 x PCI Express x16 slot, running at x16

(The PCI Express x16 slot conforms to PCI Express 4.0 standard.)(Note)

Storage Interface CPU:

- 1 x M.2 connector (Socket 3, M key, type 2260/2280 PCIe 4.0 x4/x2 SSD

support) (M2A_CPU) (Note)

Chipset:

- 1 x M.2 connector on the back of the motherboard (Socket 3, M key, type

2260/2280 SATA and PCIe 3.0 x4/x2 SSD support) (M2P_SB)

4 x SATA 6Gb/s connectors

Support for RAID 0, RAID 1, RAID 5, and RAID 10

Intel®Optane™Memory Ready

USB Chipset:

- 1 x USB Type-C®port with USB 3.2 Gen 1 support, available through the

internal USB header

- 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

- 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through

the internal USB header)

Chipset+Intel®Thunderbolt™4 Controller:

- 2 x USB Type-C®ports on the back panel, with USB 3.2 Gen 2 support

Chipset+USB 2.0 Hub:

- 2 x USB 2.0/1.1 ports available through the internal USB header

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

1 x CPU fan header

3 x system fan headers

1 x addressable LED strip header

1 x RGB LED strip header

4 x SATA 6Gb/s connectors

2 x M.2 Socket 3 connectors

1 x front panel header

1 x speaker header

1 x USB Type-C®header, with USB 3.2 Gen 1 support

1 x USB 3.2 Gen 1 header

1 x USB 2.0/1.1 header

1 x Clear CMOS jumper

1 x chassis intrusion header

Back Panel

Connectors

1 x DisplayPort In Port

2 x Thunderbolt™4 connectors (USB Type-C®port, with USB 3.2 Gen 2 support)

2 x USB 3.2 Gen 2 Type-A ports (red)

4 x USB 3.2 Gen 1 ports

1 x Q-Flash Plus button

1 x RJ-45 port

2 x SMA antenna connectors (2T2R)

2 x audio jacks

(Note) Supported by 11th Generation processors only.

- 8 -

I/O Controller iTE®I/O Controller Chip

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

Fan fail warning

Fan speed control

* Whether the fan speed control function is supported will depend on the cooler you

install.

BIOS 1 x 256 Mbit ash

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functions of each application may also vary depending on motherboard specications.

- @BIOS

- EasyTune

- Fast Boot

- Game Boost

- ON/OFF Charge

- RGB Fusion

- Smart Backup

- System Information Viewer

Support for Q-Flash Plus

Support for Q-Flash

Support for Xpress Install

Bundled

Software

Norton®Internet Security (OEM version)

cFosSpeed

Operating

System Support for Windows 10 64-bit

Form Factor Mini-ITX Form Factor; 17.0cm x 17.0cm

* GIGABYTE reserves the right to make any changes to the product specications and product-related information without

prior notice.

Please visit GIGABYTE's website

for support lists of CPU, memory

modules, SSDs, and M.2 devices.

Please visit the Support\Utility List

page on GIGABYTE's website to

download the latest version of apps.

- 9 -

1-3 Installing the CPU

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•Set the CPU host frequency in accordance with the CPU specications. It is not recommended

that the system bus frequency be set beyond hardware specications since it does not meet the

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications, please do so according to your hardware specications including the CPU, graphics

card, memory, hard drive, etc.

DualChannelMemoryConguration

This motherboard provides two memory sockets and supports Dual Channel Technology. After the memory

is installed, the BIOS will automatically detect the specications and capacity of the memory. Enabling Dual

Channel memory mode will double the original memory bandwidth.

The two memory sockets are divided into two channels and each channel has one memory socket as following:

Channel A: DDR4_A1

Channel B: DDR4_B1

Please visit GIGABYTE's website for details on hardware installation.

Installing the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load

plate automatically during the process of re-engaging the lever after you insert the CPU.

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

Triangle Pin One Marking on the CPU

Notch

LGA1200 CPU

Alignment

Key

Alignment

Key

LGA1200 CPU Socket

Pin One Corner of the CPU Socket

- 10 -

Inhaltsverzeichnis

Andere Gigabyte Hauptplatine Handbücher

Gigabyte

Gigabyte GA-X99-Gaming G1 WIFI Bedienungsanleitung

Gigabyte

Gigabyte GA-Z97X-SOC Force Bedienungsanleitung

Gigabyte

Gigabyte GA-H67A-D3H-B3 Bedienungsanleitung

Gigabyte

Gigabyte GA-A320M-D2P Bedienungsanleitung

Gigabyte

Gigabyte GA-K8VM800M Bedienungsanleitung

Gigabyte

Gigabyte GA-990FXA-UD3 Bedienungsanleitung

Gigabyte

Gigabyte 6VM7-4E Series Bedienungsanleitung

Gigabyte

Gigabyte GA-B75M-D3P Bedienungsanleitung

Gigabyte

Gigabyte 8S648FXP-RZ Bedienungsanleitung

Gigabyte

Gigabyte 8VT800-RZ Bedienungsanleitung

Gigabyte

Gigabyte GA-Z77X-UD4H Bedienungsanleitung

Gigabyte

Gigabyte GA-X99-SLI Bedienungsanleitung

Gigabyte

Gigabyte 7NF-RZ-C Bedienungsanleitung

Gigabyte

Gigabyte GA-AB350M-D3H Bedienungsanleitung

Gigabyte

Gigabyte MZ32-AR0 Anleitung zur Verwendung

Gigabyte

Gigabyte GA-6OXC Bedienungsanleitung

Gigabyte

Gigabyte MD80-TM0 Bedienungsanleitung

Gigabyte

Gigabyte GA-6LASH Bedienungsanleitung

Gigabyte

Gigabyte GA-73PVM-S2H Bedienungsanleitung

Gigabyte

Gigabyte GA-H61M-D1 Bedienungsanleitung

Gigabyte

Gigabyte GA-8S648 Bedienungsanleitung

Gigabyte

Gigabyte GA-H110N Bedienungsanleitung

Gigabyte

Gigabyte GA-P43-ES3G Bedienungsanleitung

Gigabyte

Gigabyte 7ZXR Series Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung