Gigabyte GS-SR103 Benutzerhandbuch
GS-SR103 System Installation Guide
1-i
GS-SR103
Rackmount Server
System Installation Guide
GS-SR103 System Installation Guide
1-ii
Contents
1. SAFETY, CARE AND REGULATORY INFORMATION 1-1
2. INTRODUCTION 2-1
2.1. PREFACE 2-1
2.2. FEATURES 2-1
3. PACKAGE CONTENTS 3-1
3.1. COMPONENT CONTENT LIST 3-1
4. SYSTEM INSTALLATION PROCEDURES 4-1
4.1. CHASSIS COVER REMOVAL 4-1
4.2. CPU INSTALLATION 4-2
4.3. HEAT SINK INSTALLATION 4-2
4.4. MEMORY INSTALLATION 4-2
4.5. PCI EXPANSION CARD INSTALLATION 4-3
4.6. AIRFLOW DUCT INSTALLATION 4-4
4.7. REINSTALL TOP COVER 4-6
4.8. DOCK HANDLES INSTALLATION 4-6
4.9. HARD DISK DRIVE INSTALLATION 4-7
4.10. APPEARANCE OF GS-SR103 4-8
4.10.1 FRONT VIEW OF THE GS-SR103 4-8
4.10.2 REAR VIEW OF THE GS-SR103 4-8
4.10.3 LED INDICATOR 4-9
4.11 CONNECTOR ICONS 4-10
The author assumes no responsibility for any errors or omissions that may appear in
this document nor does the author make a commitment to update the information
contained herein.
Third-party brands and names are the property of their respective owners.
GS-SR103 System Installation Guide
1-1
1. Safety, Care and Regulatory Information
Important safety information
Read and follow all instructions marked on the product and in the
documentation before you operate your system. Retain all safety and
operating instructions for future use.
The product should be operated only from the type of power source
indicated on the rating label.
If your computer has a voltage selector switch, make sure that the
switch is in the proper position for your area. The voltage selector
switch is set at the factory to the correct voltage.
The plug-socket combination must be accessible at all times because
it serves as the main disconnecting device.
All product shipped with a three-wire electrical grounding-type plug
only fits into a grounding-type power outlet. This is a safety feature.
The equipment grounding should be in accordance with local and
national electrical codes. The equipment operates safely when it is
used in accordance with its marked electrical ratings and product
usage instructions
Do not use this product near water or a heat source.
Set up the product on a stable work surface or so as to ensure
stability of the system.
Openings in the case are provided for ventilation. Do not block or
cover these openings. Make sure you provide adequate space
around the system for ventilation when you set up your work area.
Never insert objects of any kind into the ventilation openings.
To avoid electrical shock, always unplug all power cables and modem
cables from the wall outlets before removing covers.
Allow the product to cool before removing covers or touching internal
components.
Precautions for Products With Laser Devices
Observe the following precautions for laser devices:
Do not open the CD-ROM drive, make adjustments, or perform
procedures on a laser device other than those specified in the
product’s documentation.
GS-SR103 System Installation Guide
1-2
Only authorized service technicians should repair laser devices.
Precautions for Products With Modems, Telecommunications, or
Local Area Network Options
Observe the following guidelines when working with options:
Do not connect or use a modem or telephone during a lightning storm.
There may be a risk of electrical shock from lightning.
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
Do not plug a modem or telephone cable into the network interface
controller (NIC) receptacle.
Disconnect the modem cable before opening a product enclosure,
touching or installing internal components, or touching an uninsulated
modem cable or jack.
Do not use a telephone line to report a gas leak while you are in the
vicinity of the leak.
GS-SR103 System Installation Guide
1-3
Federal Communications Commission (FCC) Statement
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC
emission limits. Neither the provider nor the manufacturer are responsible for any radio or
television interference caused by using other than recommended cables and connectors or
by unauthorized changes or modifications to this equipment. Unauthorized changes or
modifications could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC part 68 (applicable to products fitted with USA modems)
The modem complies with Part 68 of the FCC Rules. On this equipment is a label that
contains, among other information, the FCC registration number and Ringer Equivalence
Number (REN) for this equipment. You must, upon request, provide this information to your
telephone company.
If your telephone equipment causes harm to the telephone network, the Telephone
Company may discontinue your service temporarily. If possible, they will notify in
advance. But, if advance notice is not practical, you will be notified as soon as possible.
You will be informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect proper operation of your equipment. If they do, you will be
notified in advance to give you an opportunity to maintain uninterrupted telephone service.
The FCC prohibits this equipment to be connected to party lines or coin-telephone service.
The FCC also requires the transmitter of a FAX transmission be properly identified (per FCC
Rules Part 68, Sec. 68.381 (c) (3)).
/ for Canadian users only /
GS-SR103 System Installation Guide
1-4
Canadian Department of Communications Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the radio interference regulations of Industry Canada.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de Classe B prescrites dans le règlement sur le
brouillage radioélectrique édicté par Industrie Canada.
DOC notice (for products fitted with an Industry Canada-compliant
modem)
The Canadian Department of Communications label identifies certified equipment. This
certification means that the equipment meets certain telecommunications network protective,
operational and safety requirements. The Department does not guarantee the equipment will
operate to the user satisfaction.
Before installing this equipment, users ensure that it is permissible to be connected to the
facilities of the local Telecommunications Company. The equipment must also be installed
using an acceptable method of connection. The customer should be aware that compliance
with the above conditions might not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance
facility designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications company cause to
request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the
power utility, telephone lines and internal metallic water pipe system, if resent are connected
together. This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician, as appropriate.
NOTICE: The Load Number (LN) assigned to each terminal device denotes the percentage
of the total load to be connected to a telephone loop which is used by the device, to prevent
overloading. The termination on a loop may consist of any combination of devices subject
only to the requirement that the sum of the Load Numbers of all the devices does not
exceed 100.
/ for European users only /
GS-SR103 System Installation Guide
1-5
European Community Directive Conformance Statement
This product is in conformity with the protection requirements of EC Council Low Voltage
Directive (Safety) 73/23/EEC, EMC Directive 89/336/EEC on the approximation of the
laws of the Member States relating to electro-magnetic compatibility.
R&TTE Directive (applicable to products fitted with European modems)
This modem does not require any physical and/or software additional switch settings
from the User and is suitable for use only on telephone lines provided with
Multi-Frequency Dialing facilities.
The equipment has been approved in accordance with Council Decision 99/5/EC on
radio equipment and terminal telecommunication equipment and the mutual recognition
of their conformity.
GS-SR103 System Installation Guide
2-1
2. Introduction
2.1. Preface
This installation guide will assist you in installing all the essential
components for rack mount server system. Keeping the guidebook with
your server for referencing information.
In order to get the optimal usage of your server, please pay attention to
the following tips:
Go through the installation guide carefully before starting the
system installation processes.
Keep the system away from static and magnetic field.
Do not apply any cleaning solutions directly to the system.
2.2. Features
The Gigabyte GS-SR103 is an ultra-thin rack-optimized server that
offers superior performance and scalability to your networking system.
It contains the several features that provide respective performance for
your networking solutions. The key features of the server include:
GS-SR103 System Installation Guide
2-2
Features
Processor Supported Dual Socket 370 for Intel FC-PGA Pentium
III or other compatible processor up to 1 GHz
and above
100/133MHz FSB
AUTO detect CPU voltage
BIOS Support Dual BIOS technology; 2M bit flash
ROM
IDE#0~#3, LS120, ZIP & CD-ROOM
bootable
AC recovery ON/OFF control
AMI BIOS with enhanced ACPI feature for
PC99/Win98/Win2000 compliance, Green,
PnP, DMI, INT 13(>8.4GB) & Anti-Virus
functions
Auto-detect & report system health status
Chipset VIA Apollo Pro Family AGP set
(VT82C694X, VT82C686A) Chipset
ATI Rage XL VGA Chip
PROMISE PDC20265R
Intel 82559 Dual LAN chip
Memory Supported 4 168-pin 25 degree slant DIMM sockets
Supports PC-100/PC-133 SDRAM and VCM
SDRAM
Supports up to 4.0GB SDRAM
Supports only 3.3V SDRAM DIMM
Mass Storage System Max 3 IDE ATA channels
Inhaltsverzeichnis
Andere Gigabyte Server Handbücher
Gigabyte
Gigabyte G291-2G0 Bedienungsanleitung
Gigabyte
Gigabyte R283-Z97-AAF1 Bedienungsanleitung
Gigabyte
Gigabyte H263-S63-AAN1 Bedienungsanleitung
Gigabyte
Gigabyte R183-Z91 Bedienungsanleitung
Gigabyte
Gigabyte R123-C00-AA01 Bedienungsanleitung
Gigabyte
Gigabyte G493-ZB0-AAP1 Bedienungsanleitung
Gigabyte
Gigabyte H273-Z81-LAN1 Bedienungsanleitung
Gigabyte
Gigabyte R263-Z33-AAF1 Bedienungsanleitung
Gigabyte
Gigabyte GS-SR326 Benutzerhandbuch
Gigabyte
Gigabyte G262-ZO0 Bedienungsanleitung
Gigabyte
Gigabyte R152-P30 Bedienungsanleitung
Gigabyte
Gigabyte H252-Z10 Bedienungsanleitung
Gigabyte
Gigabyte H273-Z80-LAN1 Bedienungsanleitung
Gigabyte
Gigabyte H261-NO0 Bedienungsanleitung
Gigabyte
Gigabyte R133-C13-AAB1 Bedienungsanleitung
Gigabyte
Gigabyte R162-ZA1 Bedienungsanleitung
Gigabyte
Gigabyte R283-Z91-AAD1 Bedienungsanleitung
Gigabyte
Gigabyte GS-R12T4H2 Bedienungsanleitung
Gigabyte
Gigabyte R282-N80 Bedienungsanleitung
Gigabyte
Gigabyte R163-Z30-AAG1 Bedienungsanleitung
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung