Gigabyte R152-P30 Bedienungsanleitung

R152-P30

Ampere® Altra® ARM Server - 1U 10-Bay

User Manual

Rev. 1.0

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:

 User Manual: detailed information & steps about the installation, conguration and use of this

product (e.g. motherboard, server barebones), covering hardware and BIOS.



User Guide: detailed information about the installation & use of an add-on hardware or

software component (e.g. BMC rmware, rail-kit) compatible with this product.

Quick Installation Guide: a short guide with visual diagrams that you can reference easily for

installation purposes of this product (e.g. motherboard, server barebones).

Please see the support section of the online product page to check the current availability of these

documents.

For More Information

For related product specications, the latest rmware and software, and other information please visit our website at

http://www.gigabyte.com

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our reseller

portal: http://reseller.b2b.gigabyte.com

For further technical assistance, please contact your GIGABYTE representative or visit

https://esupport.gigabyte.com/ to create a new support ticket

For any general sales or marketing enquiries, you may also message GIGABYTE server directly by email:

server[email protected]

Conventions

The following conventions are used in this user's guide:

NOTE!

Gives bits and pieces of additional

information related to the current topic.

CAUTION!

Gives precautionary measures to

avoid possible hardware or software problems.

WARNING!

Alerts you to any damage that might

result from doing or not doing specic actions.

Server Warnings and Cautions

Before installing a server, be sure that you understand the following warnings and cautions.

WARNING!

To reduce the risk of electric shock or damage to the equipment:

• Do not disable the power cord grounding plug. The grounding plug is an important safety

feature.

• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all

times.

• Unplug all the power cords from the power supplies to disconnect power to the equipment.

•

• Unplug the power cord from the power supply to disconnect power to the equipment.

• Do not route the power cord where it can be walked on or pinched by items placed against it.

Pay particular attention to the plug, electrical outlet, and the point where the cord extends from

the server.

WARNING!

To reduce the risk of personal injury from hot surfaces, allow the drives

and the internal system components to cool before touching them.

WARNING!

This server is equipped with high speed fans. Keep away from hazardous

moving fan blades during servicing.

WARNING!

This equipment is intended to be used in Restrict Access Location. The

access can only be gained by Skilled person.

Only authorized by well trained professional person can access the

restrict access location.

CAUTION!

• Do not operate the server for long periods with the access panel open or removed. Operat-

ing the server in this manner results in improper airow and improper cooling that can lead to

thermal damage.

• Danger of explosion if battery is incorrectly replaced.

• Replace only with the same or equivalent type recommended by the manufacturer.

• Dispose of used batteries according to the manufacturer’s instructions.

Electrostatic Discharge (ESD)

CAUTION!

ESD CAN DAMAGE DRIVES, BOARDS, AND OTHER PARTS. WE RECOMMEND THAT YOU

PERFORM ALL PROCEDURES AT AN ESD WORKSTATION. IF ONE IS NOT AVAILABLE,

PROVIDE SOME ESD PROTECTION BY WEARING AN ANTI-STATIC WRIST STRAP AT-

TACHED TO CHASSIS GROUND -- ANY UNPAINTED METAL SURFACE -- ON YOUR SERVER

WHEN HANDLING PARTS.

Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by

their edges without any component and pin touching. After removing a board from its protective

wrapper or from the system, place the board component side up on a grounded, static free sur-

face. Use a conductive foam pad if available but not the board wrapper. Do not slide board over

any surface.

System power on/off: To remove power from system, you must remove the system from

rack. Make sure the system is removed from the rack before opening the chassis, adding, or

removing any non hot-plug components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be

present on power, telephone, and communication cables. Turn off the system and disconnect the

cables attached to the system before servicing it. Otherwise, personal injury or equipment dam-

age can result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage drives,

boards, and other parts. We recommend that you perform all procedures in this chapter only at

an ESD workstation. If one is not available, provide some ESD protection by wearing an antistatic

wrist strap attached to chassis ground (any unpainted metal surface on the server) when handling

parts.

ESD and handling boards: Always handle boards carefully. They can be extremely

sensitive to electrostatic discharge (ESD). Hold boards only by their edges. After removing a

board from its protective wrapper or from the system, place the board component side up on a

grounded, static free surface. Use a conductive foam pad if available but not the board wrapper.

Do not slide board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips

over two jumper pins. Some jumpers have a small tab on top that can be gripped with ngertips

or with a pair of ne needle nosed pliers. If the jumpers do not have such a tab, take care when

using needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with

the pliers, never the wide sides. Gripping the wide sides can dam-age the contacts inside the

jumper, causing intermittent problems with the function con-trolled by that jumper. Take care to

grip with, but not squeeze, the pliers or other tool used to remove a jumper, or the pins on the

board may bend or break.

CAUTION!

Risk of explosion if battery is replaced incorrectly or with an incorrect type. Replace the battery

only with the same or equivalent type recommended by the manufacturer. Dispose of used bat-

teries according to the manufacturer’s instructions.

- 7 -

Table of Contents

Chapter 1 Hardware Installation .....................................................................................9

1-1 Installation Precautions.................................................................................... 9

1-2 Product Specications.................................................................................... 10

1-3 System Block Diagram................................................................................... 13

Chapter 2 System Appearance.....................................................................................15

2-1 Front View...................................................................................................... 15

2-2 Rear View....................................................................................................... 15

2-3 Front Panel LED and Buttons ........................................................................ 16

2-4 Rear System LAN LEDs................................................................................. 17

2-5 Power Supply Unit (PSU) LED....................................................................... 18

2-6 Hard Disk Drive LEDs .................................................................................... 19

Chapter 3 System Hardware Installation ......................................................................21

3-1 Removing Chassis Cover............................................................................... 22

3-2 Removing and Installing the Fan Duct ........................................................... 23

3-3 Removing and Installing the CPU .................................................................. 24

3-4 Installing the Memory..................................................................................... 25

3-4-1 Eight Channel Memory Conguration.....................................................................25

3-4-2 Installing a Memory ...............................................................................................26

3-4-3 DIMM Population Table ..........................................................................................26

3-5 Installing the PCI Expansion Card ................................................................. 27

3-6 Installing the Hard Disk Drive......................................................................... 28

3-7 Installing the Mezzanine Card (Optional)....................................................... 29

3-8 Installing and Removing an M.2 Solid State Drive......................................... 30

3-9 Replacing the FAN Assemblly........................................................................ 31

3-10 Replacing the Power Supply.......................................................................... 32

3-11 Cable Routing ................................................................................................ 33

Chapter 4 Motherboard Components ...........................................................................37

4-1 Motherboard Components ............................................................................. 37

4-2 Jumper Settings ............................................................................................. 39

Chapter 5 BIOS Setup ..................................................................................................41

5-1 The Main Menu .............................................................................................. 43

5-2 Advanced Menu ............................................................................................. 45

5-2-1 Trusted Computing .................................................................................................46

5-2-2 ACPI Settings .........................................................................................................47

5-2-3 General Watchdog..................................................................................................48

- 8 -

5-2-4 APEI Conguration.................................................................................................49

5-2-5 PCI Subsystem Settings.........................................................................................50

5-2-6 Info Report Conguration .......................................................................................57

5-2-7 USB Conguration..................................................................................................58

5-2-8 Network Stack ........................................................................................................59

5-2-9 NVMe Conguration ...............................................................................................60

5-2-10 Power Restore Conguration .................................................................................61

5-2-11 Intel(R) I350 Gigabit Network Connection..............................................................62

5-2-12 MAC IPv4 Network Conguration...........................................................................64

5-2-13 MAC IPv6 Network Conguration...........................................................................65

5-3 Chipset Setup Menu....................................................................................... 66

5-3-1 CPU Conguration..................................................................................................67

5-3-2 Memory Slot Information ........................................................................................68

5-3-3 RAS Conguration..................................................................................................71

5-3-4 PCIE Root Complex Conguration .........................................................................72

5-4 Server Management Menu............................................................................. 73

5-4-1 System Event Log ..................................................................................................74

5-4-2 BMC self test ..........................................................................................................75

5-4-3 View FRU Information ............................................................................................76

5-4-4 BMC Network Conguration ...................................................................................77

5-5 Security Menu ................................................................................................ 78

5-5-1 Secure Boot............................................................................................................79

5-6 Boot Menu...................................................................................................... 81

5-7 Save & Exit Menu........................................................................................... 83

5-8 BIOS POST Beep code (AMI standard)......................................................... 84

5-8-1 PEI Beep Codes.....................................................................................................84

5-8-2 DXE Beep Codes ...................................................................................................84

- 9 - Hardware Installation

1-1 Installation Precautions

The motherboard/system contain numerous delicate electronic circuits and components which

can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully

read the service guide and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist

strap, keep your hands dry and rst touch a metal object to eliminate static electricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power

supply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your

hardware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to

system components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

Chapter 1 Hardware Installation

Hardware Installation - 10 -

1-2 Product Specications

Socket

CPU Ampere® Altra® Processor

Single processor, 7nm technology

Up to 80-core per processor

Socket

Socket Single socket

LGA4926

Socket

Chipset System on Chip

Socket

Memory 16 x DIMM slots

DDR4 memory supported only

8-Channel memory architecture

RDIMM modules up to 256GB supported

LRDIMM modules up to 256GB supported

Up to 4TB of memory capacity supported per processor

Memory speed: Up to 3200 MHz

Socket

LAN 2 x 1GbE LAN ports (1 x Intel® I350-AM2)

1 x 10/100/1000 Mbps management LAN

Socket

Video Integrated in Aspeed® AST2500

2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp

Socket

Storage 6 x 2.5" SATA/SAS hot-swappable HDD/SSD bays from CRAO338 SAS RAID Card

4 x 2.5" NVMe hot-swappable HDD/SSD bays from onboard NVMe ports

Socket

RAID RAID 0/ 1/ 1E/ 10

Socket

Expansion Slot Riser Card CRS101D:

1 x PCIe x16 slot (Gen4 x16), Full height half-length

1 x OCP 2.0 mezzanine slot, occupied by CRAO338 SAS RAID Card

2 x M.2 slots:

M-key

PCIe Gen4 x4

Supports NGFF-2242/2260/2280/22110 cards

NOTE:

We reserve the right to make any changes to the product specications and product-related

information without prior notice.

Inhaltsverzeichnis

Andere Gigabyte Server Handbücher

Gigabyte

Gigabyte R162-ZA1 Bedienungsanleitung

Gigabyte

Gigabyte R143-EG0-AAC1 Bedienungsanleitung

Gigabyte

Gigabyte DO22-ST0 Bedienungsanleitung

Gigabyte

Gigabyte TO15-S41-IA01 Bedienungsanleitung

Gigabyte

Gigabyte G242-Z12 Bedienungsanleitung

Gigabyte

Gigabyte G152-Z12 Bedienungsanleitung

Gigabyte

Gigabyte R183-ZF1-AAJ1 Bedienungsanleitung

Gigabyte

Gigabyte G593-ZD2-AAX1 Bedienungsanleitung

Gigabyte

Gigabyte T181-Z70 Bedienungsanleitung

Gigabyte

Gigabyte S453-S70-AAV1 Bedienungsanleitung

Gigabyte

Gigabyte H273-Z81-AAN1 Bedienungsanleitung

Gigabyte

Gigabyte GS-SR102T Benutzerhandbuch

Gigabyte

Gigabyte G182-C20 Bedienungsanleitung

Gigabyte

Gigabyte R281-T91 Bedienungsanleitung

Gigabyte

Gigabyte G150-B10 Bedienungsanleitung

Gigabyte

Gigabyte R283-Z94-AAD1 Bedienungsanleitung

Gigabyte

Gigabyte G293-Z41-AAP1 Bedienungsanleitung

Gigabyte

Gigabyte R283-S98-AAE1 Bedienungsanleitung

Gigabyte

Gigabyte H262-NO0 Bedienungsanleitung

Gigabyte

Gigabyte R123-C00-AA01 Bedienungsanleitung

Gigabyte

Gigabyte G293-S46-AAM1 Bedienungsanleitung

Gigabyte

Gigabyte H263-S62-AAN1 Bedienungsanleitung

Gigabyte

Gigabyte R263-S30-AAC1 Bedienungsanleitung

Gigabyte

Gigabyte R162-Z10 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung