Gigabyte GV-3D1 Bedienungsanleitung
Copyright
© 2005 GIGABYTE TECHNOLOGYCO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any from
without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on VGA card, this may void the warranty of this VGA card.
Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a
commitment to update the information contained herein.
GV-3D1
User's Manual
Dual GeForce™6600 GT Graphics Accelerator
Rev. 101
12MD-3D1-101
GV-3D1 Graphics Accelerator - 2 -
English
Table of Contents
1. Introduction ......................................................................................... 3
1.1. Features ..................................................................................................... 3
1.2. Minimum system requirements ..................................................................... 3
2. Hardware Installation ........................................................................... 4
2.1. Board layout ............................................................................................... 4
2.2. Hardware installation ................................................................................... 6
3. Software Installation ............................................................................ 8
3.1. Win®XP driver and utilities installation .......................................................... 8
3.1.1. Operating system requirement ..................................................................................... 8
3.1.2. DirectX installation .......................................................................................................... 9
3.1.3. Driver installation ........................................................................................................... 11
3.1.4. Enabling the dual GeForce 6600 GT GPUs .............................................................. 13
3.1.5. Utilities on driver CD .................................................................................................... 14
3.1.6. Taskbar icon ................................................................................................................. 16
3.1.7. Display properties pages............................................................................................. 19
3.1.8. nView properties pages ............................................................................................... 24
3.2. Win®2000 driver installation ...................................................................... 29
4. Troubleshooting Tips ........................................................................ 30
5. Appendix .......................................................................................... 31
5.1. How to Reflash the BIOS ........................................................................... 31
5.1.1. Reflash BIOS in MS-DOS mode ................................................................................. 31
5.1.2. Reflash BIOS in Windows mode ................................................................................ 31
5.2. Resolutions and color depth table (In Windows®XP) .................................. 32
Introduction- 3 -
English
1. Introduction
1.1. Features
•Powered by dual NVIDIA®GeForce™6600 GT Graphics Processing Units
(GPUs) (To enable the dual 6600 GT GPUs, please check Page 6~7 for hardware
settings and Page 13 for software settings. )
•Supports the newest PCI Express x 16
•Integrated with 256MB DDRIII memory
•Supports DirectX 9.0
•Supports AV / S-Video and HDTV output
•Provides D-Sub and DVI-I connectors
1.2. Minimum system requirements
•IBM®or 100% PC compatible with Pentium®III 650MHz or AMD Athlon 650MHz
class processor or higher
•One PCI Express x 16 slot
•Operating System Win®XP
•64MB system memory
•50MB of available disk space for full installation
•CD-ROM or DVD-ROM drive
Important The GV-3D1 graphics card can only work with GIGABYTE’s SLI motherboards
that are based on NVIDIA's chipset.
The GIGABYTE's GV-3D1 is the world's first dual GPU graphics card to feature two high
performance NVIDIA GeForce 6600 GT graphics processors on a single PCI Express
board. The 3D1 is also the world's first NVIDIA GeForce 6600 GT graphics card with
256MB DDRIII memory supporting 256-bit memory bandwidth, further helping to achieve
unprecedented visual gaming performance and distinguishing it above competing products.
GV-3D1 Graphics Accelerator - 4 -
English
TV-out
VGA Monitor
Connector
(15-pin)
DVI-I Connector
2.1. Board layout
2. Hardware Installation
TV-Out
VGA Monitor
Connector
(15-pin)
DVI-I Connector
Analog LCD Monitor Analog Monitor
OR
VGA Output
NTSC / PAL TV
Projector
Y
S-Video Output
DVI-I to D-Sub Connector
Digital LCD Monitor
DVI Output
Analog LCD Monitor
VGA Output
Pr
Pb/AV Output
HDTV
Hardware Installation- 5 -
English
Expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow some
precautions whenever you work on your computer.
1. Turn off your computer and unplug power supply.
2. Use a grounded wrist strap before handling computer components. If you do not have
one, touch both of your hands to a safely grounded object or to a metal object, such as
the power supply case.
3. Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.
The card contains sensitive electric components, which can be easily damaged by static
electricity, so the card should be left in its original packing until it is installed.
Unpacking and installation should be done on a grounded anti-static mat. The operator
should be wearing an anti-static wristband, grounded at the same point as the anti-static
mat.
Inspect the card carton for obvious damage. Shipping and handling may cause damage
to your card. Be sure there are no shipping and handling damages on the card before
proceeding.
DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON
THE CARD.
In order to ensure your graphics card working correctly, please use official
Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem
on the graphics card.
GV-3D1 Graphics Accelerator - 6 -
English
2.2. Hardware installation
Installing Your graphics card.
Now that you have prepared your computer, you are ready to install your graphics accelerator
card.
To install your graphics accelerator card:
1. Power off the computer and monitor, then
disconnect the display cable from the back
of your computer.
2. Remove the computer cover. If necessary,
consult your computer's manual for help in
removing the cover.
3. Remove any existing graphics card from
your computer. Or, if your computer has
any on-board graphics capability, you may
need to disable it on the motherboard. For
more information, please see you computer
documentation.
4. On your GIGABYTE K8 SLI motherboard,
you can find an SLI switch module socket
inserted with an SLI switch module between
the first and second PCIE x 16 slots. Make
sure the SLI switch module is installed in
Normal Mode direction.
Important You must install the SLI switch module in Normal Mode direction.
System will NOT boot if you install it in SLI Mode direction.
Hardware Installation- 7 -
English
5. When Normal Mode is enabled, only the
first PCI Express x 16 slot (PCIE_16_1) is
available (please refer to the motherboard
user's manual). Locate the PCIE_16_1 slot.
If necessary, remove the metal cover from
this slot; then align your graphics card with
the PCI Express x 16 slot, and press it in
firmly until the card is fully seated.
6. Replace the screw to fasten the card in place,
and replace the computer cover.
7. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI-I connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
You are now ready to proceed with the installation of the graphics card driver. Please
refer to next chapter for detailed instructions.
To TV/VCR
To VGA Monitor To Flat Panel Display
After installation, you must connect
the power cable to your GV-3D1
graphics card (connect the black power
connector to the graphics card and both of
the two white power connectors to the
power supply), or system will not boot.
GV-3D1 Graphics Accelerator - 8 -
English
3. Software Installation
In this manual, we assume that your CD-ROM Drive to be Drive D:
The installation of Win®2000 / Win®XP drivers is very simple. When you insert the driver CD
into your CD-ROM drive, you can see the AUTORUN window (if it does not show up, run
"D:\setup.exe"). Then you can follow the guides to setup your graphics card driver. (Please
follow the subsection 3.1.3 "Driver installation" to install the driver for your graphics
accelerator.)
3.1. Win®XP driver and utilities installation
3.1.1. Operating system requirement
•When loading the graphics card drivers for the system, please make sure you have
installed DirectX 9 or later version to your system.
•If you install the graphics card drivers for the motherboard built on SIS or VIA chipsets,
please install the appropriate driver program for that motherboard. Or please contact
your motherboard nearest dealer for motherboard driver.
Software Installation- 9 -
English
3.1.2. DirectX installation
Install Microsoft DirectX to enable 3D hardware acceleration support for Windows®2000 or
Windows®XP to achieve better 3D performance.
0Note: For software MPEG support in Windows®2000 or Windows®XP, you must
install DirectX first.
Click the "Install DirectX 9" item.
Step 1. When the autorun window showes
up, click the "Install DirectX 9" item.
Step 2. Select the I accept the agreement
check box and click the "Next" button.
Step 3. Click the "Next" button again to begin
DirectX 9 installation.
GV-3D1 Graphics Accelerator - 10 -
English
Step 4. Click "Finish" to restart computer.
Then the DirectX 9 installation is completed.
Installing the components.
Inhaltsverzeichnis
Andere Gigabyte Grafikkarte Handbücher
Gigabyte
Gigabyte GV-R92128TE Bedienungsanleitung
Gigabyte
Gigabyte GV-R435OC-512I Bedienungsanleitung
Gigabyte
Gigabyte GV-N98TGR-512I Bedienungsanleitung
Gigabyte
Gigabyte GV-N560SO-1GI-950 2.0 Bedienungsanleitung
Gigabyte
Gigabyte GV-R925128D Bedienungsanleitung
Gigabyte
Gigabyte GV-N96TZL-1GI Bedienungsanleitung
Gigabyte
Gigabyte GV-N68T256DH Bedienungsanleitung
Gigabyte
Gigabyte GV-RX16T256V-RH Bedienungsanleitung
Gigabyte
Gigabyte GV-N68U256D Bedienungsanleitung
Gigabyte
Gigabyte GV-N66L128DP Bedienungsanleitung
Gigabyte
Gigabyte GV-N210D2-1GI Bedienungsanleitung
Gigabyte
Gigabyte GV-N28-1GH-B Bedienungsanleitung
Gigabyte
Gigabyte GV-NX85T256H Bedienungsanleitung
Gigabyte
Gigabyte GV-NX96T1GHP Bedienungsanleitung
Gigabyte
Gigabyte GV-N465MT-1GI Bedienungsanleitung
Gigabyte
Gigabyte GV-R465OC-1GI Bedienungsanleitung
Gigabyte
Gigabyte GV-N66T128D Bedienungsanleitung
Gigabyte
Gigabyte GV-R585D5-1GD-B Bedienungsanleitung
Gigabyte
Gigabyte GV-R477UD-1GI Bedienungsanleitung
Gigabyte
Gigabyte GV-R465-1GI Bedienungsanleitung
Beliebte Grafikkarte Handbücher anderer Marken
Gainward
Gainward GeForce GTX 690 4GB Bedienungsanleitung
ATI Technologies
ATI Technologies RADEON 137-40225-20 Bedienungsanleitung
MSI
MSI N220GT series Bedienungsanleitung
ATI Technologies
ATI Technologies RADEON 7000 MAC EDITION Bedienungsanleitung
SIIG
SIIG aurora Bedienungsanleitung
ClearSpeed
ClearSpeed ClearSpeed Advance e720 Bedienungsanleitung
