Gigabyte GV-NX76T128D-RH Bedienungsanleitung

Jun. 30, 2006

VGA Card

GV-NX76T128D-RH

VGA Card

Jun. 30, 2006

GV-NX76T128D-RH

* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste

and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!

* The WEEE marking applies only in European Union's member states.

GV-NX76T128D-RH

GeForce™7600 GT Graphics Accelerator

User's Manual

Rev. 101

12MD-NX76T1R-101R

without the expressed, written permission of GBT.

Trademarks

Third-party brands and names are the property of their respective owners.

Notice

Please do not remove any labels on VGA card, this may void the warranty of this VGA card

Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a

commitment to update the information contained herein.

Macrovision corporation product notice:

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

GV-NX76T128D-RH Graphics Accelerator - 2 -

English

Table of Contents

1. Introduction ......................................................................................... 3

1.1. Features ..................................................................................................... 3

1.2. Minimum System Requirements ................................................................... 3

2. Hardware Installation ........................................................................... 4

2.1. Board Layout .............................................................................................. 4

2.2. Hardware Installation ................................................................................... 6

3. Software Installation .......................................................................... 10

3.1. Windows®XP Driver and Utilities Installation ............................................... 10

3.1.1. Operating System Requirement ................................................................................. 10

3.1.2. DirectX Installation ........................................................................................................ 10

3.1.3. Driver Installation .......................................................................................................... 12

3.1.4. Utilities on Driver CD ................................................................................................... 14

3.1.5. Taskbar Icon ................................................................................................................. 16

3.1.6. Display Properties pages ............................................................................................ 19

3.1.7. nView Properties pages .............................................................................................. 25

3.2. Windows®2000 driver installation .............................................................. 30

4. Troubleshooting Tips ........................................................................ 31

5. Appendix .......................................................................................... 32

5.1. How to Reflash the BIOS ........................................................................... 32

5.1.1. Reflash BIOS in MS-DOS Mode ................................................................................. 32

5.1.2. Reflash BIOS in Windows Mode ................................................................................ 32

5.2. Connecting to a HDTV .............................................................................. 33

5.3. Resolutions and Color Depth Table (In Windows®XP) ............................... 34

Introduction- 3 -

English

1. Introduction

1.1. Features

•Powered by NVIDIA®GeForce™7600 GT Graphics Processing Unit (GPU)

•Supports the newest PCI Express x16

•Integrated with 128MB DDRIII memory

•Supports DirectX 9.0c

•Supports NVIDIA® SLITM (Scalable Link Interface) technology (Note)

•Supports AV / S-Video and HDTV output

•Supports D-sub connector

•Supports DVI-I connector

1.2. Minimum System Requirements

•IBM®or 100% PC compatible with Pentium®III 650MHz or AMD Athlon 650MHz

class processor or higher

•One PCI Express x16 slot

•Operating Systems Windows®2000 / Windows®XP

•64MB system memory

•50MB of available disk space for full installation

•CD-ROM or DVD-ROM drive

•Minimum power supply 300W (To set up an SLI system with the graphics cards,

please use a power supply of 400 watt or above)

(Note) SLI technology requires a PCI Express motherboard with two x16 physical connectors.

Graphics cards working in an SLI configuration must be with the same model name (i.e. GV-

NX76T128D-RH) and from the same vendor (i.e. GIGABYTE TECHNOLOGY).

GV-NX76T128D-RH Graphics Accelerator - 4 -

English

TV-out

DVI-I Connector

VGA Monitor Connector

2. Hardware Installation

2.1. Board Layout

TV-Out

VGA Monitor

Connector

(15-pin)

DVI-I Connector

Analog LCD Monitor Analog Monitor

VGA Output

S-Video Output

Pb/AV Output

NTSC / PAL TV Projector

HDTV

NTSC / PAL TV Projector

Analog LCD Monitor

Digital LCD Monitor

DVI Output

DVI-I to D-Sub

Adapter

VGA Output

Hardware Installation- 5 -

English

Expansion cards contain very delicate Integrated Circuit (IC) chips. To

protect them against damage from static electricity, you should follow some

precautions whenever you work on your computer.

1. Turn off your computer and unplug power supply.

2. Use a grounded wrist strap before handling computer components. If you do not have

one, touch both of your hands to a safely grounded object or to a metal object, such as

the power supply case.

3. Place components on a grounded antistatic pad or on the bag that came with the

components whenever the components are separated from the system.

The card contains sensitive electric components, which can be easily damaged by static

electricity, so the card should be left in its original packing until it is installed.

Unpacking and installation should be done on a grounded anti-static mat. The operator

should be wearing an anti-static wristband, grounded at the same point as the anti-static

mat.

Inspect the card carton for obvious damage. Shipping and handling may cause damage

to your card. Be sure there are no shipping and handling damages on the card before

proceeding.

DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON

THE CARD.

In order to ensure your graphics card working correctly, please use official

Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem

on the graphics card.

GV-NX76T128D-RH Graphics Accelerator - 6 -

English

2.2. Hardware Installation

Installing Your graphics card.

Now that you have prepared your computer, you are ready to install your graphics accelerator

card.

To remove the existing graphics card:

1. Power off the computer and monitor, then

disconnect the display cable from the back

of your computer.

2. Remove the computer cover. If necessary,

consult your computer's manual for help in

removing the cover.

3. Remove any existing graphics card from

your computer.

Or, if your computer has any on-board

graphics capability, you may need to disable

it on the motherboard. For more information,

please see your computer documentation.

Hardware Installation- 7 -

English

2. Replace the screws to fasten the card in

place, and replace the computer cover.

3. Plug the display cable into your card; then

turn on the computer and monitor. If your

graphics card came with a DVI-I connector,

you can connect a flat panel display to the

appropriate connector, as shown below...

You are now ready to proceed with the installation of the graphics card driver. Please refer

to next chapter for detailed instructions.

When installing the graphics card, do

not push down the heat pipe. This may

To install your new graphics card:

1. Locate two PCI Express x 16 slots. If

necessary, remove the metal covers from

the slots; then align your graphics card with

the PCI Express x 16 slots, and press it in

firmly until the card is fully seated.

* Please make sure that the gold edge connectors of the graphics card is securely inserted.

displace the heat pipe and cause bad contact

between the GPU and thermal pad as well as

affect the heat dissipation. To avoid system

instability, do not touch the graphics card when

it is runnnig .

To VGA Monitor

To TV / VCR

To Flat Panel Display

GV-NX76T128D-RH Graphics Accelerator - 8 -

English

GIGABYTE Component Video Adapter for Nvidia Graphics Cards (HDTV Cable)

(1) Connecting HDTV

Connect your HDTV cables to the component video

adapter according to the corresponding color. (Y= Green,

Pr= Red, Pb= Blue)

(2) Connecting S-Video

If your TV has a S-Video connection, connect the S-

Video cable from your TV to the S-Video Out port on the

adapter.

(3) Connecting AV Output

If your TV has a Composite video connection, you can

connect the RCA cable from your TV to the AV Out port

on the adapter.

Connect to the TV-Out port

on the graphics card.

S-Video Out HDTV Component

(Y+Pr+Pb)

AV Out

Inhaltsverzeichnis

Andere Gigabyte Grafikkarte Handbücher

Gigabyte

Gigabyte GV-R545D3-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-RX30HM128D Bedienungsanleitung

Gigabyte

Gigabyte GV-GF1280RT-64 Bedienungsanleitung

Gigabyte

Gigabyte GV-N66128DP Bedienungsanleitung

Gigabyte

Gigabyte GV-NX76T256D-RH Bedienungsanleitung

Gigabyte

Gigabyte GV-RX165P256D-RH Bedienungsanleitung

Gigabyte

Gigabyte GV-R5876P-2GD-B Bedienungsanleitung

Gigabyte

Gigabyte GV-R485MC-1GH Bedienungsanleitung

Gigabyte

Gigabyte GV-NX96T1GHP Bedienungsanleitung

Gigabyte

Gigabyte GV-R7032T Bedienungsanleitung

Gigabyte

Gigabyte GV-R70256D Bedienungsanleitung

Gigabyte

Gigabyte GV-R105256DP2-RH Bedienungsanleitung

Gigabyte

Gigabyte GV-N460SE-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-N52128DS-RH Bedienungsanleitung

Gigabyte

Gigabyte GV-N560UD-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-R98X256D Bedienungsanleitung

Gigabyte

Gigabyte GV-RX80L512DE Bedienungsanleitung

Gigabyte

Gigabyte GV-NX88T512HP Bedienungsanleitung

Gigabyte

Gigabyte GV-NX66128DP-SI Bedienungsanleitung

Gigabyte

Gigabyte GV-N450TC-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-R575D5-1GD Bedienungsanleitung

Gigabyte

Gigabyte GV-N68T256D Bedienungsanleitung

Gigabyte

Gigabyte GV-N550UD-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-R80L256V Bedienungsanleitung

Beliebte Grafikkarte Handbücher anderer Marken

Gainward

Gainward GeForce GTX 690 4GB Bedienungsanleitung

ATI Technologies

ATI Technologies RADEON 137-40225-20 Bedienungsanleitung

MSI

MSI N220GT series Bedienungsanleitung

ATI Technologies

ATI Technologies RADEON 7000 MAC EDITION Bedienungsanleitung

SIIG

SIIG aurora Bedienungsanleitung

ClearSpeed

ClearSpeed ClearSpeed Advance e720 Bedienungsanleitung

MSI

MSI R7850 series Bedienungsanleitung

DVS

DVS Atomix HDMI Bedienungsanleitung

Aztech

Aztech VGS3D-AGP Bedienungsanleitung

Advoli

Advoli TB4 Standard Bedienungsanleitung

ELSA

ELSA ERAZOR III LT Bedienungsanleitung

Themis

Themis TGA-7000 PMC Bedienungsanleitung

EMS

EMS XtremeRGB-Ex1 Bedienungsanleitung

Pioneer

Pioneer PDA-5003 Bedienungsanleitung

QDI

QDI N2 Bedienungsanleitung

NEC

NEC N8116-48 Bedienungsanleitung

Nvidia

Nvidia Quadro Workstation Bedienungsanleitung

MSI

MSI R7770 PoweR Edition Bedienungsanleitung