Gigabyte GV-RX80L256V Bedienungsanleitung

any from without the expressed, written permission of GBT.

Trademarks

Third-party brands and names are the property of their respective owners.

Notice

Please do not remove any labels on VGA card, this may void the warranty of this VGA card

Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make

a commitment to update the information contained herein.

User's Manual

Rev. 101

12MD-RX80L256V-101

GV-RX80L256V

Radeon X800 XL Graphics Accelerator

GV-RX80L256V Graphics Accelerator

- 2 -

English

Table of Contents

1. Introduction .........................................................................................3

1.1. Features ..................................................................................................... 3

1.2. Minimum System Requirement .................................................................. 3

2. Hardware Installation...........................................................................4

2.1. Board Layout .............................................................................................. 4

2.2. Hardware Installation ................................................................................... 6

3. Software Installation ............................................................................ 8

3.1. Windows®XP Driver and Utilities Installation ................................................. 8

3.1.1. Operating System Requirement ................................................................................... 8

3.1.2. DirectX Installation .......................................................................................................... 9

3.1.3. Driver Installation .......................................................................................................... 10

3.1.4. Utilities on Driver CD ................................................................................................... 12

3.1.5. Taskbar Icon ................................................................................................................. 15

3.1.6. Display Properties pages ............................................................................................ 18

3.2. Windows®2000 Driver Installation ............................................................. 31

4. Troubleshooting Tips .........................................................................32

5. Appendix ...........................................................................................33

5.1. How to Reflash the BIOS .......................................................................... 33

5.1.1. Reflash BIOS in MS-DOS mode .................................................................................... 33

5.1.2. Reflash BIOS in Windows mode .................................................................................... 33

5.2. Resolutions and Color Depth Table (In Windows®XP) ............................. 34

Introduction- 3 -

English

1. Introduction

1.1. Features

•Powered by ATI X800 XL Visual Processing Unit (VPU)

•Supports the newest PCI Express x 16

•Integrated with 256MB DDRIII memory

•Supports DirectX 9.0

•Supports TV-Out and D-Sub connector

•Supports AV/S-Video and HDTV output

•Support AV / S-Video input

•Supports DVI-I connector

•Supports HDTV cable

1.2. Minimum System Requirement

•IBM®or 100% PC compatible with Pentium®III 650MHz or AMD Athlon 650MHz

class processor or higher

•One PCI Express x 16 slot

•Operating Systems Win®2000 / Win®XP

•64MB system memory

•50MB of available disk space for full installation

•CD-ROM or DVD-ROM drive

GV-RX80L256V Graphics Accelerator

- 4 -

English

2. Hardware Installation

2.1. Board Layout

VIVO

VGA Monitor Connector

(15-pin)

DVI-I Connector

VIVO

VGA Monitor

Connector

(15-pin)

DVI-I Connector

NTSC / PAL TV

Projector

Analog LCD Monitor Analog Monitor

VGA Output

Analog LCD Monitor

Digital LCD Monitor

DVI Output

DVI-I to D-Sub

Connector

VGA Output

HDTV S-Video Output

Pb/AV Output

AV Input

S-Video Input

Hardware Installation- 5 -

English

Expansion cards contain very delicate Integrated Circuit (IC) chips. To

protect them against damage from static electricity, you should follow

some precautions whenever you work on your computer.

1. Turn off your computer and unplug power supply.

2. Use a grounded wrist strap before handling computer components. If you do not

have one, touch both of your hands to a safely grounded object or to a metal object,

such as the power supply case.

3. Place components on a grounded antistatic pad or on the bag that came with the

components whenever the components are separated from the system.

The card contains sensitive electric components, which can be easily damaged by

static electricity, so the card should be left in its original packing until it is installed.

Unpacking and installation should be done on a grounded anti-static mat. The operator

should be wearing an anti-static wristband, grounded at the same point as the anti-

static mat.

Inspect the card carton for obvious damage. Shipping and handling may cause damage

to your card. Be sure there are no shipping and handling damages on the card before

proceeding.

DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON

THE CARD.

In order to ensure your graphics card working correctly, please use official

Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem

on the graphics card.

GV-RX80L256V Graphics Accelerator

- 6 -

English

2.2. Hardware Installation

Installing Your Graphics card.

Now that you have prepared your computer, you are ready to install your graphics

accelerator card.

To install your graphics accelerator card:

1. Power off the computer and monitor, then

disconnect the display cable from the back

of your computer.

2. Remove the computer cover. If necessary,

consult your computer's manual for help

in removing the cover.

3. Remove any existing graphics card from

your computer.

Or, if your computer has any on-board

graphics capability, you may need to

disable it on the motherboard. For more

information, see you computer

documentation.

Hardware Installation- 7 -

English

4. Locate the PCI Express x 16 slot. If

necessary, remove the metal cover from

this slot; then align your graphics card with

the PCI Express x 16 slot, and press it in

firmly until the card is fully seated.

5. Replace the screw to fasten the card in

place, and replace the computer cover.

6. Plug the display cable into your graphics

card; then turn on the computer and

monitor.

You are now ready to proceed with the installation of the graphics card drivers. Please

refer to next chapter for detailed instructions.

To Flat Panel Display To VGA Monitor

Warning!

When installing the graphics card, do

not push down the heat pipe. This

may displace the heat pipe and cause

bad contact between the graphics

chip and thermal pad as well as affect

the heat dissipation. To avoid system

instability, do not touch the graphics

card when it is runnnig .

9-Pin for VIVO

GV-RX80L256V Graphics Accelerator

- 8 -

English

3. Software Installation

In this manual, we assume that your CD-ROM Drive letter to be Drive D:

The installation of Windows®2000 / Windows®XP drivers is very simple. When you insert

the driver CD into your CD-ROM drive, you can see the AUTORUN window (if it does not

show up, run "D:\setup.exe"). Then you can follow the guides to setup your graphics card

driver. (Please follow the subsection 3.1.3 "Driver installation" to install the driver for your

graphics accelerator.)

3.1. Windows®XP Driver and Utilities Installation

3.1.1. Operating System Requirement

•When loading the graphics card drivers for the system, please make sure your

system has installed DirectX 9 or later version.

•If you install the graphics card drivers for the motherboard, which consist of SIS, or

VIA chipsets, please install the appropriate driver program for that motherboard.

Or please contact your motherboard nearest dealer for motherboard driver.

Software Installation- 9 -

English

3.1.2. DirectX Installation

Install Microsoft DirectX to enable 3D hardware acceleration support for Windows®2000

or Windows®XP to achieve better 3D performence.

0Note: For software MPEG support in Windows®2000 or Windows®XP, you must

install DirectX first.

Step 1. When autorun window show up, click the

Install DirectX 9 item.

Step 2. Choose I accept the agreement

and click the Next button.

Step 3. Click the Next button.

Step 4. Click Finish to restart computer.

Then the DirectX 9 installation is completed.

Installing the components.

Click the Install DirectX 9 item.

GV-RX80L256V Graphics Accelerator

- 10 -

English

3.1.3. Driver Installation

A. New hardware found

After the graphics card is inserted into your computer at the first time, the windows will

automatically detect a new hardware in the system and pop out a "New Hardware Found"

message. The following is the step-by-step installation guide.

Step 1: Found new hardware wizard: Video controller (VGA Compatible)

Click the Next button to install the driver. (There

is a driver CD disk that came with your graphics

accelerator, please insert it now.)

Or click the Cancel button to install the driver

from AUTORUN window.

Step 2: Found new hardware wizard: Searching and installing

The wizard will search for the driver and install it automatically.

Step 3: Found new hardware wizard: Finish

Click the Finish button to finish the installation.

Inhaltsverzeichnis

Andere Gigabyte Grafikkarte Handbücher

Gigabyte

Gigabyte GV-R545SL-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-N570UD-13I Rev2.0 Bedienungsanleitung

Gigabyte

Gigabyte GeForce GTX 1050 Ti D5 Bedienungsanleitung

Gigabyte

Gigabyte GV-N250-512I Bedienungsanleitung

Gigabyte

Gigabyte GV-RX19T512VB-RH Bedienungsanleitung

Gigabyte

Gigabyte GV-N275UD-896I Bedienungsanleitung

Gigabyte

Gigabyte GV-RX345256HI Bedienungsanleitung

Gigabyte

Gigabyte GV-N96TSL-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-N560OC-1GI Bedienungsanleitung

Gigabyte

Gigabyte NVIDIA GV-N730D5-2GI Bedienungsanleitung

Gigabyte

Gigabyte GV-NX84S256HE Bedienungsanleitung

Gigabyte

Gigabyte GV-NX88T512HP Bedienungsanleitung

Gigabyte

Gigabyte GV-N220OC-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-N780OC-3GD Bedienungsanleitung

Gigabyte

Gigabyte GV-R555D5-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-N210D3-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-N98TOC-1GI rev2.0 Bedienungsanleitung

Gigabyte

Gigabyte GA-660 Series Bedienungsanleitung

Gigabyte

Gigabyte GV-R105256DP2-RH Bedienungsanleitung

Gigabyte

Gigabyte GV-N450-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-R9000 Bedienungsanleitung

Gigabyte

Gigabyte GV-N68U256D Bedienungsanleitung

Gigabyte

Gigabyte GV-N52128DS Bedienungsanleitung

Gigabyte

Gigabyte GV-N66128DP Bedienungsanleitung

Beliebte Grafikkarte Handbücher anderer Marken

Gainward

Gainward GeForce GTX 690 4GB Bedienungsanleitung

ATI Technologies

ATI Technologies RADEON 137-40225-20 Bedienungsanleitung

MSI

MSI N220GT series Bedienungsanleitung

ATI Technologies

ATI Technologies RADEON 7000 MAC EDITION Bedienungsanleitung

SIIG

SIIG aurora Bedienungsanleitung

ClearSpeed

ClearSpeed ClearSpeed Advance e720 Bedienungsanleitung

MSI

MSI R7850 series Bedienungsanleitung

DVS

DVS Atomix HDMI Bedienungsanleitung

Aztech

Aztech VGS3D-AGP Bedienungsanleitung

Advoli

Advoli TB4 Standard Bedienungsanleitung

ELSA

ELSA ERAZOR III LT Bedienungsanleitung

Themis

Themis TGA-7000 PMC Bedienungsanleitung

EMS

EMS XtremeRGB-Ex1 Bedienungsanleitung

Pioneer

Pioneer PDA-5003 Bedienungsanleitung

QDI

QDI N2 Bedienungsanleitung

NEC

NEC N8116-48 Bedienungsanleitung

Nvidia

Nvidia Quadro Workstation Bedienungsanleitung

MSI

MSI R7770 PoweR Edition Bedienungsanleitung