Gigaset Gigaset 100 Bedienungsanleitung

s*LJDVHW

100

Operating Manual

and Safety Precautions !

The digital cordless

DECT telephone

Gigaset 100, GB/IRL, A31008-G100-B100-2-7619 Giga100.fm 02.04.01

Brief overview

Displays

Special displays

Base station symbolCLift handset

4Save

J* character ____ Keypad lock

@# character ª

Handset ready for

registration

PRecall key ª Handset searching

for registered base

1Pause «Handset found

base that is ready for

registration

_Memory empty

Keypad lock

– Lock on/off

hold down to

activate / de-ac-

tivate!

Redial

Handset key

– Accept/end call

– Dial call number

(when have digits

already stored)

Dial pause

–Holddown!

Speed dialling





Base station

symbol

–Constant:

ready for dial-

ling/receiving

calls

–Flashing: no

Connection to

base station

Recall key

–ForPABXsand

select carrier

services

Memory key

– For saving

– For settings

Gigaset 100, GB/IRL, A31008-G100-B100-2-7619 Giga100.fm 02.04.01

Safety precautions

•Only use the power supply unit supplied as indicated

at the rear side of the base unit.

• Only use the battery supplied or the approved battery ty-

pe (see page 7).

• Do not install in the immediate vicinity of other devices

e.g. stereo system, television, office equipment or micro-

wave, as they could affect each other.

• Medical equipment can be affected by the handset.

• The handset can cause an unpleasant humming sound in

hearing aids.

• Do not hold the handset to your ear when it is ringing (in-

coming ring tone).

• Do not install the handset in bathrooms or showers.

• Do not operate the handset in environments where there

is risk of explosion (e.g. paint shops).

• Dispose of batteries and the telephone in an environmen-

tally friendly manner and in accordance with the relevant

legislation.

• Ensure that the operating instructions are included when

passing on your Gigaset 100 to a third party.

• The handset’s battery compartment features the following

diagram:

–hOperate battery type in accordance with these

operating instructions.

– Ensure correct battery connector polarity (red cable:

plus pole, black cable: minus pole), otherwise the hand-

set will not work properly. Incorrect polarity can damage

the handset and battery.

Gigaset 100, GB/IRL, A31008-G100-B100-2-7619 Giga100.fm 02.04.01

Putting the telephone into service

Step 1: Connecting the base station

First of all, connect your base station to the telephone jack

and the mains supply.

If you do not want to use the telephone cable supplied,

ensure that you use either a straightforward extension cable

or a telephone cable with 3/4 connector assignment,

otherwise your Gigaset 100 will not function correctly.

1free

2free

3La

4Lb

5free

6free

* Appearance may differ depending on the country!

• Insert the rectangular

connector provided on

the telephone cable into the socket.

• Place the cable in the cable duct.

• Insert telephone jack into telephone socket.

220 V/

230 V

• Insert small round connector of

the power cable into the socket.

• Place the cable in the cable duct

(for strain relief).

• Insert the power supply unit into

the wall socket.

Telephone

jack*

Gigaset 100, GB/IRL, A31008-G100-B100-2-7619 Giga100.fm 02.04.01

Putting the telephone into service

Step 2: Inserting the battery

• Insert the battery connector in to the socket (see inset); it

must lock securely into place.

• Place the battery in the battery compartment.

• Insert the battery cable in the clip provided.

• Slide the cover into the battery compartment and push

forward until it clicks into place. To open the cover, lift it

up.

The display is protected by a film.

Please remove protective film.

1122

• Only use approved batteries.

• Never use non-Siemens charging units as these

can damage the batteries.

Gigaset 100, GB/IRL, A31008-G100-B100-2-7619 Giga100.fm 02.04.01

Putting the telephone into service

Step 3: Registering the handset at the base station

Before you can make or receieve telephone calls you need

to register the handset at the base station.

Place the handset in the base station and

leave it there until registration is complete.

The registration display will appear. This may

take up to 5 minutes depending on the

charge level of the battery.

The . symbol will flash on the display.

Unplug the power supply unit (220V/230V)

from the mains socket.

The handset must remain in the base sta-

tion. Plug the power supply unit back into

the mains socket.

After about 90 seconds the symbol will

stop flashing and the normal standby display

will appear. The handset is now registered at

this base station.

Make sure the base station is connected to the

power supply (Step 1) and the battery is inserted

in the handset (Step 2).

Gigaset 100, GB/IRL, A31008-G100-B100-2-7619 Giga100.fm 02.04.01

Putting the telephone into service

Step 4: Charging the battery

The battery supplied is not charged.

To charge the battery, place the handset in

the base station. For the first charging we

recommend a continuous charging time for

at least 16 hours. You can then make calls.

Step 5: Setting short flash time (100ms) for the

signalling key

A short flash time (100ms) is required to operate the recall

key. Press the following keys to set the flash time:

1KdK

Battery information

Handset operating times/charging time

Power consumption in standby mode

Approved battery

Batteries are available from your stockist or via the Internet,

from Siemens Service Shop at:

http://www.siemens.siemens.ie/shop; alternatively see also

last page.

• Once the first charging operation is completed, you can

replace the handset in the base station after any call.

• The batteries warm up during charging - this is normal

and not a cause for concern.

Capacity Standby

time Ta l k t i m e Charging

time

300 (mAh) up to 100 h up to 10 h approx. 16 h

No charging approx. 1.7 watts

While charging approx. 2.1 watts

Nickel-cadmium (NiCd)

Type 1a (300 mAh)V30145-K1310-X147 NiCd

Gigaset 100, GB/IRL, A31008-G100-B100-2-7619 Giga100.fm 02.04.01

Making calls

Making a call

7Enter the call number.

1Press the handset key. A connection is set

up. The icon

Cappears on the display.

Did you enter the wrong number by

mistake? If so, then press the handset key

1twice.

Ending a call

1Press the handset key. The icon

Cdisap-

pears from the display;

place the handset in the base station.

The connection is cleared down.

Accepting a call

1Press the handset key. The connection is

set up.

Redialling a number

The last call number dialled is saved.

)Dial the call number.

1Press the handset key. The connection is

set up.

You can also dial a number by pressing the handset key first

and then entering the relevant digits.

You can use the recall key ,to insert a pause (hold the

key down). This may be necessary for international calls or

when dialling in to automatic announcement services.

Gigaset 100, GB/IRL, A31008-G100-B100-2-7619 Giga100.fm 02.04.01

Making calls

Saving/changing a call number (speed dialling)

You can save up to 10 telephone numbers as speed dialling

digits and dial them at the push of a button.

KPress the memory key followed by the

speed dialling key.

e.g. dEnter the speed dialling digit (0 to 9).

7Enter the call number.

KSave the speed dialling digit. You will hear

the confirmation beep.

Speed dialling

Press the speed dialling key.

e.g. dSelect the speed dialling digit (0 to 9).

1Press the handset key. The connection is

set up.

Cost-effective telephony

You can use the network access numbers of various provi-

ders to minimise costs (Call-by-Call*), depends on the offe-

ring of the service provider. Like a call number, these

numbers can be saved as speed dialling digits (0 to 9).

You can, however, also dial the network access or call num-

bers as usual.

• Network access using a speed dialling digit

Hold down the speed dialling key.The speed

dial memory location "0" with the network

access number is automatically displayed.

71Enter the user’s call number and dial the

complete number via the handset keypad.

The speed dialling digit "0" is automatically activated by

holding down number with the identification the speed dial-

ling key. We therefore recommend assigning a frequently

dialled number to "0" (e.g. a network access number).

 PQVCXCKNCDNGKPCNNEQWPVTKGU

Gigaset 100, GB/IRL, A31008-G100-B100-2-7619 Giga100.fm 02.04.01

Cost-effective telephoning

• "Linking" or chaining of multiple speed dialling digits

You can link multiple access numbers and call numbers

that have been saved as speed dialling numbers.

Hold down the speed dialling key.

e.g. dMemory location "0" with the network

access number is displayed.

Press the speed dialling key once more.

e.g. Select the speed dialling digit (0 to 9) for a

user. The network access number and the

call number are chained and displayed.

1Press the handset key. The connection is

set up.

Settings

Handset volume

You can set the handset volume to any of three levels.

KYActivate the function.

e.g. DKChange the volume (levels 1 to 3) and save.

Ringer volume

You have three volumes to choose from.

KGActivate the function – the ringer sounds.

e.g. cK Change the ringer volume (levels 1 to 3) and

save.

Further access numbers can be saved as speed dialling

numbers (0 to 9).

To use them press and then the relevant speed dialling

key.

Andere Handbücher für Gigaset 100

Inhaltsverzeichnis

Andere Gigaset Schnurloses Telefon Handbücher

Gigaset

Gigaset S700 H PRO Bedienungsanleitung

Gigaset

Gigaset A160 Bedienungsanleitung

Gigaset

Gigaset A180 Bedienungsanleitung

Gigaset

Gigaset r630h pro Bedienungsanleitung

Gigaset

Gigaset Gigaset A110 Bedienungsanleitung

Gigaset

Gigaset R700H PRO Bedienungsanleitung

Gigaset

Gigaset C510 Bedienungsanleitung

Gigaset

Gigaset E310 Bedienungsanleitung

Gigaset

Gigaset E310 Bedienungsanleitung

Gigaset

Gigaset Gigaset SL1 Bedienungsanleitung

Gigaset

Gigaset WIDEX W570 Bedienungsanleitung

Gigaset

Gigaset A490 Bedienungsanleitung

Gigaset

Gigaset C470 IP Bedienungsanleitung

Gigaset

Gigaset SL750H PRO Bedienungsanleitung

Gigaset

Gigaset SL400A Bedienungsanleitung

Gigaset

Gigaset Gigaset C460 Bedienungsanleitung

Gigaset

Gigaset A490 Bedienungsanleitung

Gigaset

Gigaset C670 Bedienungsanleitung

Gigaset

Gigaset A400 Bedienungsanleitung

Gigaset

Gigaset C430 Bedienungsanleitung

Gigaset

Gigaset r630h pro Bedienungsanleitung

Gigaset

Gigaset S850 Bedienungsanleitung

Gigaset

Gigaset Giga 3000 Bedienungsanleitung

Gigaset

Gigaset Gigaset C2 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung

Panasonic

Panasonic KX-TGP700 Bedienungsanleitung