Gil Brothers Technology XL21 Bedienungsanleitung
GILBT - LED display
User manual
Models : XL21, XL31, XL41, XL22, XL32, XL42
Product of Gil Brothers Technology all copyrights © reserved
GILBT –LED displays manufacturer www.gilbt.com
Introduction
Congratulations and thank you for your confidence.
The subject of the purchase is high quality LED display - suitable for indoor and also
outdoor use. LED display allows you to send general information and advertising spots
to the viewers.
Our product is characterized by innovative technical solutions to facilitate its service and
also to maximize the economy and the strength of the device.
We hope that we will contribute to the popularity of your company.
We wish you a lot of success!
Index
Introduction .................................................................................................................................. 2
Index ............................................................................................................................................. 2
Installation .................................................................................................................................... 3
1.1 Installation process ............................................................................................................ 4
1.2 Electric Installation............................................................................................................. 4
1.3 Installation of DCF system (optional) ................................................................................. 4
2. Handling .............................................................................................................................. 5
2.1. Remote controller...................................................................................................... 5
2.2. Presentation selection ............................................................................................... 6
2.3. Standby...................................................................................................................... 6
2.4. Internal menu ............................................................................................................ 6
a. selecting presentation via menu ............................................................................... 6
b. time setup.................................................................................................................. 7
c. contrast...................................................................................................................... 7
d. night mode ................................................................................................................ 7
e. auto standby.............................................................................................................. 8
f. pulsation.................................................................................................................... 8
g. temperature adjustment ........................................................................................... 9
3. Warranty terms and conditions .......................................................................................... 9
4. Technical specification ...................................................................................................... 11
GILBT –LED displays manufacturer www.gilbt.com
Installation
Important!
If the assembly does not execute a person authorized by GilBT. The company is not
liable for any damage caused by incorrect installation.
Before installation, make sure that surface dedicated for installation is suitable to
support weight of given device. We do not recommend soft and fragile surfaces, such
as polystyrene foam, mineral wool, plaster boards and wooden walls with a thickness of
less than 30mm, etc.
Models 30cm high:
model
RL21; YL21; GL21; BL21
RL31; YL31; GL31; BL31
RL41; YL41; GL41; BL41
B
800mm
1200mm
1700mm
Models - 55cm high:
GILBT –LED displays manufacturer www.gilbt.com
1.1 Installation process:
•fix two mounting brackets on dedicated surface, according to above
dimensions
•loosen the four screws on the device to enable them to settle freely in the
bracket holders
•slide the display into the bracket holders from the left or right side (depends on
the fixing direction of the brackets)
•make sure that the device was inserted into the holders until it stops and each
of the points of attachment is stable
•use a flat spanner to tighten the screws
1.2 Electric Installation
Caution!
We highly recommend that user should not perform electric installation without licensed
electrician. GilBT company does not take any responsibility for damages caused by
inappropriate and unprofessional installation.
GilBT company warns that the bare wires increase the risk of skin contact with
conductors that can result in electric shock. Electric installation can be legally executed
only by a licensed electrician and GilBT does not take responsibility for the negative
effects associated with improper installation.
1.3 Installation of DCF system (optional)
The DCF aerial enables you to receive a signal generated by atomic clock based
nearby Frankfurt in Germany and sync the display’s clock to it . Atomic clock it is the
most precise form of time measuring know to man.
DCF aerial is located right in the surface-mounted box connected with the device. Box
should be fixed on the flat surface in horizontal position. Keep it at least 1m away from
display (LED device might distort expected signal with its electromagnetic emission).
Find a proper place for the aerial to ensure appropriate signal reception. To determine
whether signal reception is sufficient or too weak observe the small LED fixed on the
aerial box. Once display is turned on the diode should give a solid light for a few
seconds and start blinking after a moment. LED should blink equally with a 1 second
gaps (59 blinks and 1 stop over and over again). Any stops or irregular blinking defines
weak signal. After installation excess of the lead can be stored in the aerial box.
GILBT –LED displays manufacturer www.gilbt.com
2. Handling
LED screen displays presentation saved by user on the provided SD card. Each
presentation consists of slides; their quantity, display order and type depends on user’s
preferences. Given presentations are being saved as a *.prs file.
These files can be created thanks to LPD software ( LED Presentation Designer). The
LPD software and also its manual can be downloaded directly from our official website,
please refer to the below link:
http://www.gilbt.com/_eindex.html
2.1. Remote controller
The display can be controlled by provided RC to alter basing settings. The controller is
equipped with 4 buttons. Each button has its individual function depending on the status
of the display.
Buttons functions in various display modes :
displaying mode
standby mode
menu
A button
menu
turn on
back
B button
standby
turn on
↑
C button
previous presentation
turn on
OK or next
D button
next presentation
turn on
↓
GILBT –LED displays manufacturer www.gilbt.com
2.2. Presentation selection
GilBT LED screens has ability to handle as many presentation files as can be saved on
the provided SD card.
If there is more than one presentation saved on the flash memory there is ability to
select preferred *.prs file which will be played over and over again.
The pocket controller has 4 buttons, the easiest way to switch played presentation is to
press “C” or “D” button which will result in skipping to the next or previous file. In this
simple way user can quickly choose currently played presentation. There is also way to
do this through menu; what will be described in details further in this chapter.
2.3. Standby
Standby is the mode that helps save an energy when there is no requirement to display
any content, possibly late hours, time off, etc.
In order to accommodate the display in mentioned mode press “B” button while screen
is in display mode, the screen will shut down immediately. To wake it up press any of 4
buttons just once the device will play automatically last remembered presentation.
There is also an option to drive the LED display into a standby mode automatically
(auto standby- more about this option further in this manual).
2.4. Internal menu
The device enables you to change some settings through the internal menu. In order to
enter given menu press “A” button , while device is in the display mode.
Once you entered menu; all buttons change their functions accordingly to the
descriptions in the corners, the same as a buttons layout.
In the menu you can alter following settings
a. selecting presentation via menu
Apart from the mentioned way of choosing preferred *.prs file to be played (point 2.2).
There is an option to select the file via internal menu. In order to do so, enter the
“Presentation” in the menu.
GILBT –LED displays manufacturer www.gilbt.com
Once you entered, list of saved *.prs files should appear on the screen. Choose wanted
presentation using up and down buttons and accept by pressing “OK”.
b. time setup
In order to set a current time and date enter to the menu and select “Clock”. The device will
display the time saved in memory.
The time is saved in format consisting of 6 numbers, as follow: hour, minutes, seconds,
day, month, year. Set the individual number using up and down buttons switch to another or
previous number using next and back buttons .
In order to save changes click next button so many times that you return to the menu.
Other way of returning to the menu will result in ignoring the changes.
c. contrast
In order to adjust the brightness of the display enter the menu and select “Set contrast”.
After this option current contrast value will appear on the screen which can be adjusted by
up and down buttons. Set the value between 1 and 10 and accept it by clicking next
button, otherwise changes will be ignored.
d. night mode
In some instances contrast used during the day might be too bright for a dark time. GilBT
display enables you to set a night contrast that is automatically used by device after dark.
The reason behind this is to adjust optimal brightness for different conditions and save the
energy.
Enter the “Night mode” in internal menu. The contrast value dedicated for a night time will
GILBT –LED displays manufacturer www.gilbt.com
appear on the screen.
Set the value: 1 –10 or Disabled.
In that last case display will use standard contrast through all day long. Do not forget to
save the changes by clicking next, otherwise alerted settings will be lost.
Hint!
The night time lasts from time of sunset to the time of sunrise, therefore this option
requires correct time and date to be set.
e. auto standby
The LED screen enables you to choose its working hours. In other words you can set the
time that the display is ON eg. possibly the same time as opening hours of your business.
That function helps you to save an energy and effort - constantly turning on and off the
device when needed.
In order to set the working hours go to “Set standby” in internal menu. The screen with
“from: 00:00” and “to: 00:00” will appear. This value determine what time the display will be
in standby mode eg. from 01:00 to 08:30 it means that between these hours the LED
display will be OFF and at 08:30 it will automatically wake up and play last remembered
presentation. Set the wanted hours and accept it by clicking next button until you return to
the menu. If you attend to switch this function OFF set both values to 00:00 it will result in
24h working time of the device.
Hint!
There is always an option to wake up the display manually while it is in auto standby
mode. If you wish to do so just press any button and if you want to put it a sleep again
just press B button .It does not affect auto standby mode settings.
f. pulsation
While creating a visual presentation on the laptop or desktop computer, there is an
option to use pulsation effect which additionally draws viewer’s attention.
GILBT –LED displays manufacturer www.gilbt.com
In the menu under position “Pulsation” is an option to do a little bit more about this
effect.
There are three options to choose; set the pulsation programmed by user in LPD,
switch to constant pulsation applied to all displayed content, disable pulsation at all.
Select preferred setting and accept it.
g. temperature adjustment
Device has a built-in sensor that allows you to display current temperature on the
screen ( more details about this option in LPD user manual).
Because of constantly changing weather conditions there could be a difference between
displayed temperature and current one. In order to prevent this from happening device
has an option of sensor calibration.
If you attend to correct the displayed temperature, go to “Temperature adj.” in the menu.
Set the current temperature by using up and down buttons and accept it.
Hint!
Before temperature calibration always leave device for a couple of minutes turned on.
Temperature inside of unit might be slightly different when screen is warmed up.
3. Warranty terms and conditions
All products of Gil Brother Technology company are subject to 24 months warranty. The
term of warranty can be extended up to 36 moths (max.) with additional payment (ask
for more details at local dealer)
During warranty period all defects will be eliminated on the manufacturer cost.All these
at the local service point authorized by GilBT. Cost of delivery to the work shop have to
covered by user. Cost of delivery back to the user will be covered by entity engaged
in the repair. Warranty period automatically will be extended for the time that the unit is
being repaired.
Warranty repairs will be executed only with a valid proof of purchase.
GILBT –LED displays manufacturer www.gilbt.com
Warranty does not cover:
•any defects resulting from the cleaning, repairs, etc. performed by an entity
other than an authorized by GilBT.
•mechanical, chemical, thermal damages and any other
defects resulting from careless or improper storage (eg storage of goods in the
inappropriate conditions such a temperature out of specified range, storage close
to chemicals such as naphthalene or other harmful chemicals),improper
maintenance, etc.
•damage caused by improper installation and use not recommended by
manufacturer eg. device is adopted for stationary installation and usage.
•any defects or damage that occurred as a result of fire, earthquake, flood,
lightning or other natural disasters, environmental pollution, irregular or
defective supply of electricity such a voltage fluctuations
•abrasion and scratching of the outer surfaces including plastics and metals
Warranty can lapse due to:
•improper installation or maintenance
•repair or opening of the device by unauthorized persons
•mechanical, thermal and chemical damages or usage inconsistent with its
intended purpose
The warranty does not exclude, limit or suspend the rights of the purchaser arising from
the consumer protection law.
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
