Quick Rec: With Quick Recording, you can quickly turn your camera on
and begin capturing video or Time Lapse photos.
Wi-Fi: Turns On / Off Wi-Fi.
Wi-Fi: Set Wi-Fi working frequency. F1 spports 802.11a/b/g/n
2.4G/5GHz, which significantly improved anti-interference technology.
Bluetooth: Turns On / Off bluetooth.
System: Video format setting is mainly for watching the video on
TV/HDTV to control the video frame rate of the recording.
NTSC Watch the video on the area of North America.
Watch the video on the PAL/HDTV (apply to the
most of TV except the area of North America).
PAL
Setting Description
Res (Resolution): The maximum photo resolution is 8MP.
Shutter (Shutter Speed): Shutter speed lets you determine the
amount of time that the shutter is open. The default option is Auto
(Not support in burst mode).
Stamp: Add a date stamp to your photo.
Zoom: It zooms in on the center of the shot, good for capturing
content at a distance, change the zoom value according to the
distance between the camera and object.
Meter: The metering mode refers to the way in which the camera
determines the exposure. Various metering modes are provided to
allow the user to select the most appropriate one for use in a variety of
lighting conditions.
WB (White Balance): White balance adjusts the overall color tone of
photos. The camera can automatically adjust the white balance, or you
can manually adjust the white balance.
Color: Color allows you to adjust the color profile of your photos.
ISO: ISO Limit adjusts the camera’s sensitivity in low-light
environments, and creates a balance between brightness and resulting
image noise.
Sharpness: Sharpness controls the sharpness of your photos. You can
use High option for an ultra-sharp look, the Medium option for
moderate sharpness, or the Low option for a softer look.
EV: Exposure value (EV) affects the level of brightness of your photo.
Adjusting this setting can improve image quality when shooting in
environments with contrasting lighting conditions.
Calib(Calibration): It applies software correction to the lens distortion
before it saves the image file to the memory card.
Press the Power/Mode Button [ ] repeatedly until the Setup screen
appears.
Press the Menu Button [ ] or Shutter/Select Button [ ] to enter
the Settings Menu. Use the Power/Mode Button [ ] to cycle
through the settings. To select an option, leave the option highlighted,
press Shutter/Select Button [ ] to open the setting menu. To exit
setting mode, press Menu Button [ ].
Setup Mode
-11 - -12 -
