Glacier bay 874X-0001 Montageanleitung

THANK YOU

INSTALLATION AND CARE GUIDE

SINGLE-HANDLE TUB AND SHOWER FAUCET

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this tub and

shower faucet. We strive to continually create quality products designed to enhance your home. Visit us online

to see our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

Model#

874X-0001

SKU#

108191

THD

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM/GLACIERBAY

5/2017 REV.01

Table of Contents

Important Information..............................2

Warranty ...................................................2

Pre-Installation.........................................3

Planning Installation ..............................3

Package Contents..................................6

Installation................................................7

Care and Cleaning ....................................14

Troubleshooting........................................15

Service Parts

...........................................

Important Information

□ Do not install this product until you read and understand the instructions in this manual. If you are installing this

product for someone else, leave this manual for the owner’s/ user’s reference.

□ Inlet ports are designed to allow for 1/2 in. COPPER tubing solder connection or 1/2 in. IPS threading coupling

connection. For threaded connections, wrap sealant tape around threaded ends before connecting. If soldering

connections, certain inammable parts should be removed prior to the soldering in order to avoid heat damage.

If you are unsure how to properly remove these parts, please call us at 1-855-HD-Glacier.

□ Protect your eyes with safety glasses when cutting or soldering water supply lines.

□ NOISE AND WATER HAMMER IN PEX SYSTEMS: Due to the inherent exibility of PEX compared with metallic

plumbing materials, water hammer and noise can sometimes occur from the pressure surges. It is important to

ensure the tubing is not in contact with wallboard, forced air ducts or other high-resonance materials. Clamping

or strapping can help prevent these noises. DO NOT USE PEX tubing from the valve to the tub spout.

Tools and Hardware Required ...............3

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that prove defective.

Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-

5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer

purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for

more details.

Safety

goggles

Thread

sealant tape

Tube

cutter

Strap wrench

Adjustable

wrench

Measuring

tape Thermometer

Phillips

screwdriver

Flathead

screwdriver

SILICONE

Silicone

sealant

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents list. If any part is missing or damaged, do not attempt to install the product. Contact Customer Service

for replacement parts.

TOOLS AND HARDWARE REQUIRED

ADVANCED INSTALLATION: Consult a plumber or

professional before installing this product.

If you are replacing your plumbing valve, please review the four common plumbing methods illustrated below:

COPPER, IPS, PEX and CPVC. Remove the existing handle and valve trim before replacing your valve. Please follow

all local building and plumbing codes.

A. COPPER (Before soldering, remove the cartridge & stop valves from the valve)

Torch Lead-free solder Kit

Key

hole saw

Wire

brush

All installations can vary depending on how your previous faucet was installed. Not all supplies for faucet

installation are included; however, they are available wherever plumbing supplies are sold. When choosing your

installation supplies, make sure they are UPC and/or CSA approved products.

Flashlight

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Pre-Installation (continued)

Safety

goggles

Thread

sealant tape

Tube

cutter

Strap wrench

Adjustable

wrench

Measuring

tape Thermometer

Phillips

screwdriver

Flathead

screwdriver

SILICONE

Silicone

sealant

B. IPS

Key

hole saw

Flashlight

C. PEX+COPPER

Safety

goggles

Thread

sealant tape

Tube

cutter

Strap wrench

Adjustable

wrench

Measuring

tape Thermometer

Phillips

screwdriver

Flathead

screwdriver

SILICONE

Silicone

sealant

Key

hole saw

Flashlight

Full circle

crimping tool

Pipe

wrench

COPPER COPPER

Pre-Installation (continued)

D. CPVC+COPPER

Safety

goggles

Thread

sealant tape

Tube

cutter

Strap wrench

Adjustable

wrench

Measuring

tape Thermometer

Phillips

screwdriver

Flathead

screwdriver

SILICONE

Silicone

sealant

Key

hole saw Flashlight

CPVC

cleaner

CPVC

cement

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

COPPER COPPER

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

B Shower arm 1

C Shower head 1

D Valve body 1

E Escutcheon 1

F Handle 1

G Screw 1

H Index 1

Shower ange

I Plug 1

J Tub spout 1

K Screw 2

L Plaster guard 1

M Escutcheon screw 2

N Protective cap 1

Installation

1 Preparing for installation

CAUTION: Always shut off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

2 Installing the valve body and

removing the plaster guard

□Shut off the water supply to the tub and

shower.

□Verify that the hole sizes and positions of the

holes in the wall are correct：

□The shower and tub spout outlet holes

should be 1-1/4 in. diameter.

□Refer to Step 2 for valve access hole

dimensions.

□The recommended valve depth to the

nished wall is 1-1/2 in. min. to

2-1/2 in. max.

□Ensure that the valve body (D) cover is ush

with the nished exterior surface of the wall.

Position the valve body (D) correctly in the

wall with the side marked "UP" pointing up. The

8 in. minimum from the valve body (D) to the tub

spout (J) is required for proper operation.

A. Thin Wall Installation

“Thin Walls” are usually built up with materials

such as berglass tub surrounding them and will

be the main source of support for the valve. The

plaster guard (L) remains attached to the valve.

□

B. Thick Wall Installation

“Thick Walls” are usually built up with materials such

as cement board, drywall, tile, etc. The plaster guard

(L) is positioned so that it is ush with the nished

wall. This ensures that the valve will be at the correct

position to accept the trim. The depth for the valve

body (D) in wall is measured from the center of the

shower outlet to the nished wall surface. The

accepted depth distance is 1-1/2 in. to 2-1/2 in.. When

the depth distance is 1-1/2 in. to 2 in., there will be

interference between the plaster guard (L) and

escutcheon (E). It is recommended that you remove

the plaster guard (L) after the wall installation.

□

Unscrew the screws (K), and remove the plaster

guard (L).

□

NOTE: Be sure to position the valve body (D) correctly in

the wall, with the side marked "UP" facing upward.

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

30 in.

Tub & Shower

8 in. Min.

48 in.

Shower Only

1 1/4 in. Diamter

1 1/4 in.Diameter

48 in.

Tub & Shower

Refer to

the step 2

30 in.

Shower Only

1-1/2 in. to 2-1/2 in.

Finished wall

6 in. dia.

3-3/8 in. to 6 in. dia.

Finished wall

Installation (continued)

3 Installing the supply

connections

□

□Tighten the pipes to the valve body (D) with a

pipe wrench (not included).

Wrap thread sealant tape (not included) around

the pipe threads in a clockwise direction, as

shown.

□

Connect the hot and cold water supply lines (1,

not included), the shower outlet pipe (2, not

included), and tub outlet pipe (3, not included)

by threading them into the valve body (D) in a

clockwise direction.

Connect the pipe elbows (4, not included) to

the end of the shower outlet and tub outlet

pipes.

□

NOTE: The hot water supply lines go into the "H" inlet, and

the cold water supply lines go into the "C" inlet. Do not use

PEX or CPVC between the valve body (D) and tub spout (J).

NOTE: If you do not wish to install the tub outlet, insert

the plug (I) into the bottom of the valve body (D).

4Back to back installation

NOTE: Never install the valve body (D) upside down!

□If the hot and cold inlets are reversed (hot on

right and cold on left), remove the screw (1),

inverter (2), sleeve (3), and bonnet (4) from the

valve body (D) with reversed supply connections.

Rotate the cartridge (5) 180°, so H appears on

the right. Install the cartridge making sure that

the key is fully engaged with the slot in the

valve body (D). Slide the bonnet (4) over the

cartridge (5) and thread them onto the valve

body (D). Hand tighten securely. Reassemble

the sleeve (3), inverter (2) and screw (1). If you

are not making a reverse or back to back

installation, skip this step and continue with

the step 5.

Cold

Hot

Normal

installation

(changes

not required)

Reverse

installation

Normal installation

Reverse installation

Hot

Cold

123

Installation (continued)

6 Installing the plaster guard

Place the plaster guard (L) onto the valve body (D)

and secure with the screws (K).

□

5Flushing the water outlets

□

and checking for leaks

Remove the screw (G). Place the handle (F) on

the valve body (D) inverter and turn the handle

(F) to the full on mixed position. Turn on the hot

and cold water supply lines and allow the water

to ow from the outlets for one minute, or until

all foreign matter has been ushed out. Check

for leaks.

Shut off the water at the faucet and supply

lines. Remove the handle (F).

□

NOTE: Be sure to position the plaster guard (L) correctly

onto the valve body (D), with the side marked "SHOWER"

facing upward.

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

7 Installing the shower arm

□Insert the long end of the shower arm (B) through

the shower ange (A), and wrap thread sealant

tape (not included) around the long end of the

shower arm (B) in a clockwise direction, as

shown.

Install the long end of the shower arm (B)

into the pipe elbow inside the wall. Carefully

tighten the shower arm (B) with a clean strap

wrench. Do not over tighten.

□

Wrap thread sealant tape around the pipe

threads of the tub spout outlet (1, not included)

in a clockwise direction, as shown.

□

Connect the tub spout outlet pipe (the tub

spout outlet pipe should project 3-15/16 in. to

4-3/32 in. from the nished wall) to the lower

pipe elbow (2, not included). Tighten the elbow

and tub spout outlet pipe connections with a

strap wrench.

□

8 Installing the tub spout

□

Wrap thread sealant tape around the pipe

threads of the tub spout (J) outlet in a clockwise

direction, as shown.

Thread the tub spout (J) onto the threaded

connection in a clockwise direction until the tub

spout (J) becomes ush with the nished wall.

□

Use the strap wrench to tighten the tub spout (J).

3-15/16 in. to 4-3/32 in.

Wall

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Glacier bay Badezimmerarmatur Handbücher

Glacier bay

Glacier bay DORIND HD67110W-6001 Montageanleitung

Glacier bay

Glacier bay ARAGON HD67211W-6A01 Montageanleitung

Glacier bay

Glacier bay HD58303-2901 Bedienungsanleitung

Glacier bay

Glacier bay 30636 Bedienungsanleitung

Glacier bay

Glacier bay 14-027-W Bedienungsanleitung

Glacier bay

Glacier bay HD14026 Bedienungsanleitung

Glacier bay

Glacier bay F512C033CP Montageanleitung

Glacier bay

Glacier bay 937-207 Bedienungsanleitung

Glacier bay

Glacier bay HDC48PRGV Bedienungsanleitung

Glacier bay

Glacier bay HD67084W-6010H Montageanleitung

Glacier bay

Glacier bay 58008-0301 Bedienungsanleitung

Glacier bay

Glacier bay 67778-0001 Montageanleitung

Glacier bay

Glacier bay 20015-0104 Bedienungsanleitung

Glacier bay

Glacier bay 833CW-0001 Montageanleitung

Glacier bay

Glacier bay HD59302-2704 Bedienungsanleitung

Glacier bay

Glacier bay HD58303-2301 Bedienungsanleitung

Glacier bay

Glacier bay 2104WWHD Bedienungsanleitung

Glacier bay

Glacier bay HD58302-0016 Bedienungsanleitung

Glacier bay

Glacier bay 67364W-6A01 Montageanleitung

Glacier bay

Glacier bay BD611200NP Bedienungsanleitung

Glacier bay

Glacier bay HD58303-2201 Bedienungsanleitung

Glacier bay

Glacier bay 262A-0101 Bedienungsanleitung

Glacier bay

Glacier bay ALCOVE GB6032CDR-W Bedienungsanleitung

Glacier bay

Glacier bay HDQF12A0023BNV Montageanleitung

Beliebte Badezimmerarmatur Handbücher anderer Marken

DURAVIT

DURAVIT C.1 C15240 0090 Handbuch

Sunshower

Sunshower PURE SOLO Bedienungsanleitung

Heatstore

Heatstore HSTRL500WTN Bedienungsanleitung

Delabie

Delabie Delabie Sporting 714700 Bedienungsanleitung

Kohler

Kohler K-13056 Montageanleitung

ESS

ESS Container TCL-11 Bedienungsanleitung

Mustee

Mustee 22C Bedienungsanleitung

VITRA

VITRA V-Flow Bedienungsanleitung

Malmet

Malmet B105BT Bedienungsanleitung

bathstore

bathstore Transition H1690MM Leitfaden

baliv

baliv DUK-80.30 T Bedienungsanleitung

baliv

baliv DU-5160 Bedienungsanleitung

BELLOSTA

BELLOSTA Edward 0800/M Bedienungsanleitung

Franke

Franke PRTR0006 Bedienungsanleitung

Gessi

Gessi RILIEVO 59011 Bedienungsanleitung

noken

noken VITAE 100188525-N299998810 Bedienungsanleitung

Allen + Roth

Allen + Roth 1142VA-30-201 Bedienungsanleitung

Britex

Britex HBDA Bedienungsanleitung