Glancetron K700 Bedienungsanleitung

All-In-One POS Terminal

USER’s GUIDE

Rev.A

Glancetron K700

www.glancetron.com

This manual, software and rmware described in it are copyrighted by their respective owners

and protected under the laws of the Universal Copyright Convention. You may not reproduce,

transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by

any means, electronic, mechanical, magnetic, optical, chemical, biological, molecular, manual, or

otherwise, any part of this publication without the express written permission of the publisher.

All products and trade names described within are mentioned for identication purpose only.

No afliation with or endorsement of the manufacturer is made or implied. Product names and

brands appearing in this manual are registered trademarks of their respective companies.

The information published herein has been checked for accuracy as of publishing time. No repre-

sentation or warranties regarding the tness of this document for any use are made or implied by

the publisher. We reserve the right to revise this document or make changes in the specications

of the product described therein at any time without notice and without obligation to notify any

person of such revision or change.

Safety Instructions

1. Read these instructions carefully. Keep these instructions for future reference.

2. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or sprayed

detergent for cleaning. Use moisture sheet or cloth for cleaning.

3. Please keep this equipment from humidity.

4. Lay this equipment on a reliable surface when install. A drop or fall could cause injury.

5. Make sure power cord such a way that people can not step on it. Do not place anything over

the power cord.

6. All cautions and warnings on the equipment should be noted.

7. If the equipment is not used for long time, disconnect the equipment from main to avoid be

ing damaged by transient over voltage.

8. Never pour any liquid into opening, this could cause re or electrical shock.

9. If one of the following situations arises, get the equipment checked by a service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well or you can not get it work according to user manual.

e. The equipment has dropped and damaged.

10. Do not leave this equipment in an environment unconditioned, storage temperature below

-20°C or above 60°C, it may damage the equipment.

11. Unplug the power cord when doing any service or adding optional kits.

Lithium Battery Caution:

Danger of explosion can happen if the battery is incorrectly replaced. Replace only the original

or equivalent type recommended by the manufacture. Dispose used batteries according to the

manufacture’s instructions.

Do not remove the cover, and ensure no user serviceable components are inside. Take the unit

to the service center for service and repair.

CE Notice

This device complies with the requirements of the CE directive.

WEEE Notice

This appliance is labeled in accordance with European Directive 2002/96/EC concerning waste

electrical and electronic equipment (WEEE). The Directive determines the framework for the

return and recycling of used appliances as applicable throughout the European Union. This label

is applied to various products to indicate that the product is not to be thrown away, but rather

reclaimed upon end of life per this Directive.

The information contained in this document is subject to change without notice.

This document contains proprietary information that is protected by copyright. All rights

are reserved. No part of this document may be reproduced,translated to another language

or stored in a retrieval system, or transmitted by any means, electronic, mechanical,

photocopying, recording, or otherwise, without prior written permission. Windows is a registered

trademark of Microsoft, Inc. Other brand or product names are trademarks of their respective hold-

ers.

The test results show that this device meets the FCC rules. Those limits are set to protect

residential areas from the devices with harmful emission. This device will produce, use and

radiate radio frequency energy. In addition, failure to follow the user’s manual to install or use

this device might produce harmful interference with radio communication. Not withstanding the

foregoing, it does not guarantee that this type of harmful interference does not occur in some

special installations. The interference caused by this device to the reception of radio or television

signals may be veried by turning it on and off. Any changes or modications to this TFT LCD

would void the user’s authority to operate this device.

Usage Notice

! Warning -

To prevent the risk of  re or shock hazards, do not expose

this product to rain or moisture.

! Warning -

Please do not open or disassemble the product as this may

cause electric shock.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user’s manual to

maximize the life of your unit.

Do:

• Turn off the product before cleaning.

• Touch screen surface may be cleaned using a soft clean cloth moistened with

mild window glass commercial cleaners or 50/50 mixture of water and

isopropyl alcohol.

• Use a soft cloth moistened with mild detergent to clean the display housing.

• Use only high quality and safety approved DC adapter.

Don’t:

• Do not touch the LCD display screen surface with sharp or hard objects.

• Do not use abrasive cleaners, waxes or solvents for your cleaning.

• Do not operate the product under the following conditions:

- Extremely hot, cold or humid environment.

- Areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic  eld.

- In direct sunlight.

Table of Contents

Copyright . ..........................................................................................................................

Safety Instructions....................................................................................................................

CE /WEEE Notice.....................................................................................................................

Usage Notice ..........................................................................................................................

Table of Contents.................................................................................................................... 1

Introduction ........................................................................................................................ 2

1.Packing List……………………………………………… ...................................................... 3

1-1 Standard Accessories……………………………………….. ......................................... 3

1-2 Optional Accessories………………………………………... ......................................... 3

2. System View……………………………...………. …… ....................................................... 4

2-1 Rear View……………………………………………………............................................ 4

2-2 Specication………………………………………………….. ......................................... 5

2-3 Internal Layout……………………………………………….. ......................................... 6

3. Pin Denition……………………………………………... .................................................... 7

4. Rear I/O Interface…………………..…………………….................................................... 12

5. System Assembly & Disassembly…………………… ................................................... 13

5-1 HDD………………………………………………………….... ....................................... 14

5-2 RAM…………………………………………………………... ........................................ 14

5-3 CFAST………………………………………………………........................................... 15

5-4 MSR…………………………………………………………... ........................................ 15

5-5 Internal VFD………………………………………………….. ....................................... 16

6. Device Driver Installation……………………………… ................................................... 17

6-1 Resistive Type Touch Panel …………………....………….. ....................................... 17

6-2 MagStripe Card Reader Conguration Utility…………... .......................................... 23

6-3 Fingerprint Reader…………………………………………. ......................................... 29

6-4 RFID...………………………………………………………... ........................................ 38

6-5 Internal VFD…………………………………………………. ........................................ 47

6-6 i-Button Reader Conguration Utility…………………..….......................................... 51

6-7 Installation and Testing of Smart Card Reader…………… ....................................... 54

7. BIOS/Utility Setup………………………………………..................................................... 59

7-1 Advanced…………………………………………………….. ........................................ 59

7-1-1 ACPI Conguration………………………………… .................................................. 60

7-1-2 S5 RTC Wake Settings……………………………. .................................................. 61

7-1-3 CPU Conguration…………………………………. .................................................. 62

7-1-4 IDE Conguration…………………………………..................................................... 63

7-1-5 IT8783F Super IO Conguration…………………. .................................................. 64

7-1-6 Parallel Port Conguration………………………….................................................. 66

7-2 Chipset………………………………………………… ......................................... …….67

7-2-1 Southbridge Conguration………………………… ............................................... 68

7-3 Boot…………………………………………………………… ........................................ 69

7-4 Security………………………………………………………. ........................................ 70

7-5 Save & Exit…………………………………………………… ....................................... 71

8. LCD Surface Cleaning………………………………….. ................................................... 72

Introduction

About Glancetron K700

Features include:

• A choice of stylish apple white or elegant charcoal grey are available to

compliment the decor of the working environment.

• Intel Atom D2550 1.86GHz dual core CPU with embedded options available

• Supports optical multi-touch display activated by a nger or gloved hand

• Fanless design for long life span

• Scratch-proof with 7H degree hardness surface (optical touch screen)

• IP64 water & dust-proof front panel protection

• Versatile mounting solution (panel mount) to t your decor

• Robust polymer housing design provides excellent impact resistance and

facilitates a modern appearance.

• Easy to access storage for installation and maintenance

• Optional built-in i-Button and MIFARE RFID reader

• Optional peripherals including MSR, VFD and ngerprint reader

• Optional built-in 2D barcode reader

Display

• 5-wire resistive touch

• 15-inch TFT Active Matrix Display

• Max. resolution: 1024 x 768

• Driver: Linux/ Windows CE/ Windows XP/ Windows Embedded Standard/ Windows 7/

Windows Embedded POSReady 7

System (with stand)

1| 73

Packing List

1-1 Standard Accessories

a. System (with stand)

b. Power Adapter

c. Power Cord

d. Driver Bank

e. M3 Screw x2

1-2 Optional Accessories

1. Single MSR

2. 3 IN 1 MSR

3. Screw x2

1| 73

Packing List

1-1 Standard Accessories

a. System (with stand)

b. Power Adapter

c. Power Cord

d. Driver Bank

e. M3 Screw x2

1-2 Optional Accessories

1. Single MSR

2. 3 IN 1 MSR

3. Screw x2

1| 73

Packing List

1-1 Standard Accessories

a. System (with stand)

b. Power Adapter

c. Power Cord

d. Driver Bank

e. M3 Screw x2

1-2 Optional Accessories

1. Single MSR

2. 3 IN 1 MSR

3. Screw x2

1| 73

Packing List

1-1 Standard Accessories

a. System (with stand)

b. Power Adapter

c. Power Cord

d. Driver Bank

e. M3 Screw x2

1-2 Optional Accessories

1. Single MSR

2. 3 IN 1 MSR

3. Screw x2

1| 73

Packing List

1-1 Standard Accessories

a. System (with stand)

b. Power Adapter

c. Power Cord

d. Driver Bank

e. M3 Screw x2

1-2 Optional Accessories

1. Single MSR

2. 3 IN 1 MSR

3. Screw x2

1| 73

Packing List

1-1 Standard Accessories

a. System (with stand)

b. Power Adapter

c. Power Cord

d. Driver Bank

e. M3 Screw x2

1-2 Optional Accessories

1. Single MSR

2. 3 IN 1 MSR

3. Screw x2

1| 73

Packing List

1-1 Standard Accessories

a. System (with stand)

b. Power Adapter

c. Power Cord

d. Driver Bank

e. M3 Screw x2

1-2 Optional Accessories

1. Single MSR

2. 3 IN 1 MSR

3. Screw x2

1| 73

Packing List

1-1 Standard Accessories

a. System (with stand)

b. Power Adapter

c. Power Cord

d. Driver Bank

e. M3 Screw x2

1-2 Optional Accessories

1. Single MSR

2. 3 IN 1 MSR

3. Screw x2

Power Adapter Power Cord

Driver Bank M3 Screw x2

1-2 Optional Accessories (Field installable)

1-1 Standard Accessories

Single MSR 3 IN 1 MSR Screw x2

1. Packing List

2 | 73

System View

2-1 Rear View

Item

1. Power Switch

2. 19V DC-in lock connector

3. VGA

4. USB x4

5. RJ45(LAN)

6. RJ11 for cash drawer

7. PS/2

8. RJ45(COM3 for External

VFD)

9. Mic-in

10. Line-out

11. LPT(Option)

12. PS/2 MSR Switch

Gear(Option)

13. COM2

14. COM1

15. MSR(Option)

16. iButton(Option)

17. 1D/2D Barcode

Scanner(Option)

18. RFID(Option)

19. LCM/VFD(Option)

20. HDD / CFast

21. VESA Mount

:Please make sure 19V DC plug

in the right direction before

plugging in DC jack.

2 | 73

System View

2-1 Rear View

Item

1. Power Switch

2. 19V DC-in lock connector

3. VGA

4. USB x4

5. RJ45(LAN)

6. RJ11 for cash drawer

7. PS/2

8. RJ45(COM3 for External

VFD)

9. Mic-in

10. Line-out

11. LPT(Option)

12. PS/2 MSR Switch

Gear(Option)

13. COM2

14. COM1

15. MSR(Option)

16. iButton(Option)

17. 1D/2D Barcode

Scanner(Option)

18. RFID(Option)

19. LCM/VFD(Option)

20. HDD / CFast

21. VESA Mount

:Please make sure 19V DC plug

in the right direction before

plugging in DC jack.

2. System View

2-1 Rear View

Item

1. Power Switch

2. 19V DC-in lock connector

3. VGA

4. USB x4

5. RJ45(LAN)

6. RJ11 for cash drawer

7. PS/2

8. RJ45(COM3 for External VFD)

9. Mic-in

10. Line-out

11. LPT(Option)

12. PS/2 MSR Switch Gear(Option)

13. COM2

14. COM1

15. MSR(Option)

16. iButton(Option)

17. 1D/2D Barcode Scanner(Option)

18. RFID(Option)

19. LCM/VFD(Option)

20. HDD / CFast

21. VESA Mount

■ Please make sure 19V DC plug

in the right direction before

plugging in DC jack.

Inhaltsverzeichnis

Andere Glancetron Touch-Terminal Handbücher

Glancetron

Glancetron MSR JC-1290 KB series Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung