Glensound Bella 22 Installationsanleitung

BELLA 22

22 AUDIO INPUT NETWORK AUDIO

MONITOR

PRODUCT DETAILS

6 BROOKS PLACE, MAIDSTONE, KENT, ME14 1HE. ENGLAND. TEL: +44 (0) 1622 753662

Visit our Website at www.glensound.com FAX: +44 (0) 1622 762330

Page 2of 25

Glensound Electronics Ltd

Thank you for choosing a new Glensound product.

Information contained in this manual is subject to change without notice, if

in doubt please contact us for the latest product information.

If you need any help with the product then we can be contacted at:

Glensound Electronics Ltd

1 –6 Brooks Place

Maidstone

Kent

ME14 1HE

United Kingdom

Telephone: +44 (0) 1622 753662

Fax: +44 (0) 1622 762330

EMAIL ADDRESSES

General enquires: office@glensound.co.uk

Technical enquires: techinfo@glensound.co.uk

Sales enquires: sales@glensound.co.uk

Page 3of 25

PRODUCT WARRANTY:

All equipment is fully tested before dispatch and carefully designed to

provide you with trouble free use for many years.

We have a policy of supporting products for as long as possible and

guarantee to be able to support your product for a minimum of 10 years.

For a period of one year after the goods have been despatched the

Company will guarantee the goods against any defect developing after

proper use providing such defects arise solely from faulty materials or

workmanship and that the Customer shall return the goods to the

Company’s works or their local dealer.

All non-wear parts are guaranteed for 2 years after despatch and any

defect developing after proper use from faulty materials or workmanship

will be repaired under this warranty providing the Customer returns the

goods to the Company's works or their local dealer.

Page 4of 25

EU DECLARATION OF CONFORMITY FOR:

BELLA 22

22 Input Network Audio Monitor

This declaration of conformity is issued under the sole responsibility of

the manufacturer.

This equipment is manufactured by Glensound Electronics Ltd of Brooks

Place Maidstone Kent ME14 1HE is marked and conforms to the

following Union harmonisation legislation:

Low Voltage Directive: EN60065 and EN62368-1:2014

Emissions: BS EN55032:2015

Immunity: BS EN55035:2017

Signed for and on behalf of Glensound Electronics Ltd.

Gavin Davis, Managing Director

Maidstone, Kent, England

Date: 18/01/2019

Page 5of 25

RoHS DIRECTIVE

RoHS 2 Directive 2011/65/EU restricts the use of the hazardous

substances listed below in electrical and electronic equipment.

This product conforms to the above directive and for these purposes, the

maximum concentration values of the restricted substances by weight in

homogenous materials are:

Lead

0.1%

Mercury

0.1%

Hexavalent Chromium

0.1%

Polybrominated Biphenyls

0.1%

Polybrominated Diphenyl

Ethers

0.1%

Cadmium

0.01%

Page 6of 25

WASTE ELECTRICAL AND ELECTRONIC

EQUIPMENT REGULATIONS 2006 (WEEE)

Glensound Electronics Ltd is registered for business to business sales of

WEEE in the UK our registration number is:

WEE/JJ0074UR

Page 7of 25

GLENSOUND BELA 22

Handbook Contents

Issue 1

Description Page No.

Contents

PRODUCT WARRANTY: ....................................................................................................................................3

OVERVIEW...........................................................................................................................................................8

BELLA 22 PANEL LAYOUT...............................................................................................................................9

Front Panel .......................................................................................................................................................9

Front Panel Features.......................................................................................................................................9

Rear Panel......................................................................................................................................................13

Rear Panel Features .....................................................................................................................................13

AUDIO BLOCK DIAGRAM...............................................................................................................................15

Analogue Representation.............................................................................................................................15

Mix Busses......................................................................................................................................................16

CONNECTING THE BELLA 22 TO A DANTE® NETWORK ........................................................................17

Getting Dante Controller...............................................................................................................................17

Connecting Bella 22 To The Network.........................................................................................................17

Audio Over IP Network..................................................................................................................................17

Running Dante Controller.............................................................................................................................18

Dante Controller TIP......................................................................................................................................19

Device Not Showing Up In Dante Controller..............................................................................................19

AES67 MODE......................................................................................................................................................20

UPDATING THE BROOKLYN CHIPSET.........................................................................................................22

SPECIFICATIONS ..............................................................................................................................................23

WIRING INFORMATION ..................................................................................................................................24

Standard XLR Pin Outs.................................................................................................................................24

Standard Headphone Wiring........................................................................................................................24

D9 Wiring & Loop Interconnecting To External Equipment.....................................................................25

Page 8of 25

OVERVIEW

Bella 22 is a 2 buss summing matrix confidence monitor designed for outside

broadcast trucks, studios, theatre and professional audio applications. It is perfect

for easy and cost effective monitoring of multiple network audio sources, ideal for

busy production environments and perfect for monitoring multiple network intercom &

programme feeds.

10 front panel volume controls can each control one or two network audio inputs and

the output of each of these controls can be routed to the left or right mix busses. In

addition to the 20 network audio inputs 2 analogue inputs are also provided for

added versatility.

10 front panel channel on/ solo switches are also provided enabling sources to easily

be turned on/off the loudspeaker monitoring mix, or solod to this mix if required. In

addition to the LS monitoring mix there is a 2nd mix buss that provides a permanently

on mix output fomr the 10 input circuits.

There are 32 network audio outputs in total. 20 off which are the 20 network audio

inputs taken directly after the front panel level controls. 6 are from the mix buss

taken after the solo/ channel on switches and the final 6 are from the 2nd mix buss

that is before the mix/ solo switches.

As well as the network audio outputs 3 line level analogue outputs are provided and

an AES3 output, these follow the switched/ solo mix buss.

The 2 front panel loudspeakers are driven from a DSP to compensate for their size,

the result is surprisingly good, with clear crisp vocals and highly intelligible

reproduction of wider band audio sources. They are driven from a class D amplifier

and have more than sufficient output level for most environments.

The name Bella comes from a common English phrase ‘Listen To Your Mother’

which as a child often means that you’re in trouble!

Dante Alighieri’s mother was Bella Abati.

We therefore hope that if you listen to our Bella 22 it will keep you out of trouble.

Page 9of 25

BELLA 22 PANEL LAYOUT

Front Panel

Front Panel Features

1. Channel On/ Solo Switch

These 10 round yellow illuminated switches turn the input of the associated

channel on/ off the loudspeaker, analogue, AES3 and mix/ solo network audio

outputs.

Pressing and holding one of these switches will solo its channels output to the

loudspeaker, analogue, AES3 and mix/ solo network audio outputs.

2. Input Source Control

Each of the 10 input channels has 2 network audio sources associated with it.

These appear in Dante controller as the channel number followed by ‘L’ (left)

or ‘R’ (right).

The source input control is a 3 position toggle switch. Moving it left will route

just the left audio input to the channels output routing switch, moving it right

will route just the right audio input to the channels output routing switch and in

its central position both left and right inputs will be sent to the channels output

routing switch.

Channel On/ Solo

Switch

Channel Output

Routing

Master Output

Level Control

Audio Present

Indicator

Input Level

Control

Headphone

Socket

Input Source

Control

Input Select

Switch

Dim LS Switch

Cut LS Switch

Left Panel

Loudspeaker

Right Panel

Loudspeaker

Page 10 of 25

3. Channel Output Routing

The output routing control is a 3 position toggle switch. It will route the

selected input(s) to the left/ right or both (left & right) mixes. The selected

input (left/ right channel) has a bearing on what is actually routed to the mix

circuits.

The table below shows the relationship between selected inputs to routed

outputs.

SWITCH

SETTINGS

Left Input

Both Inputs

Right Input

Left Out

Left input routed

to Left output

only

Left & Right

inputs mono’d

and routed to

Left output only

Right input

routed to Left

output only

Both Out

Left input routed

to both Left &

Right outputs

STEREO

Left input routed

to Left output

and Right input

routed to Right

output

Right input

routed to both

Left & Right

outputs

Right Out

Left input routed

to Right output

only

Left & Right

inputs mono’d

and routed to

Right output only

Right input

routed to Right

output only

4. Input Select Switch

The 10th input channel has the option of taking its left & right audio inputs

either from the Dante/ AES67 audio network OR from a pair of local analogue

audio inputs on the rear of the unit.

5. Dim Switch

When used this illuminated switch will dim both the front panel loudspeakers

and the analogue and AES3 outputs. It will also dim any of the network output

circuits that are after the dim control.

A rear panel GPI circuit also affects the state of this switch. If the rear GPI

circuit is made (i.e. on) then the switches internal LED will illuminate and

pressing the switch will not turn the dim on or off.

Inhaltsverzeichnis

Andere Glensound Lautsprechersystem Handbücher

Glensound

Glensound Dante BELLA 32 Installationsanleitung

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung