Glensound ExpressIP MINI Installationsanleitung
Page 2of 21
Glensound Electronics Ltd
Thank you for choosing a new Glensound product.
All rights reserved.
Information contained in this manual is subject to change without notice, if in
doubt please contact us for the latest product information.
If you need any help with the product then we can be contacted at:
Glensound Electronics Ltd
1 –6 Brooks Place
Maidstone
Kent
ME14 1HE
United Kingdom
Telephone: +44 (0) 1622 753662
Fax: +44 (0) 1622 762330
EMAIL ADDRESSES
General enquires: office@glensound.co.uk
Technical enquires: techinfo@glensound.co.uk
Sales enquires: sales@glensound.co.uk
Page 3of 21
PRODUCT WARRANTY
All equipment is fully tested before dispatch and carefully designed to
provide you with trouble free use for many years.
We have a policy of supporting products for as long as possible and
guarantee to be able to support your product for a minimum of 10 years.
For a period of one year after the goods have been dispatched the Company
will guarantee the goods against any defect developing after proper use
providing such defects arise solely from faulty materials or workmanship and
that the Customer shall return the goods to the Company’s works or their
local dealer.
All non-wear parts are guaranteed for 2 years after dispatch and any defect
developing after proper use from faulty materials or workmanship will be
repaired under this warranty providing the Customer returns the goods to
the Company's works or their local dealer.
SAFETY WARNING
This product can produce high sound levels via the headphone output.
Please take caution when operating this product as listening to excessively
high peak or sustained levels of volume may permanently damage human
hearing.
Page 4of 21
EU DECLARATION OF CONFORMITY
FOR:
EXPRESS
IP
MINI
DANTE®/ AES67 NETWORK AUDIO
COMMENTATOR UNIT
This declaration of conformity is issued under the sole responsibility of the
manufacturer.
This equipment is manufactured by Glensound Electronics Ltd of Brooks
Place Maidstone Kent ME14 1HE is marked and conforms to the
following Union harmonisation legislation:
Emissions: BS EN55032:2015
Immunity: BS EN55035:2017
Signed for and on behalf of Glensound Electronics Ltd.
Gavin Davis, Managing Director
Maidstone, Kent, England
Date: 28/03/2019
Page 5of 21
ROHS DIRECTIVE
RoHS 2 Directive 2011/65/EU restricts the use of the hazardous substances
listed below in electrical and electronic equipment.
This product conforms to the above directive and for these purposes, the
maximum concentration values of the restricted substances by weight in
homogenous materials are:
Lead
0.1%
Mercury
0.1%
Hexavalent Chromium
0.1%
Polybrominated Biphenyls
0.1%
Polybrominated Diphenyl
Ethers
0.1%
Cadmium
0.01%
Page 6of 21
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
REGULATIONS 2006 (WEEE)
Glensound Electronics Ltd is registered for business to business sales of WEEE
in the UK our registration number is:
WEE/JJ0074UR
Page 7of 21
GLENSOUND EXPRESS
IP
MINI MANUAL
TABLE OF CONTENTS
PRODUCT WARRANTY .................................................................................................3
EU DECLARATION OF CONFORMITY.....................................................................4
RoHS DIRECTIVE ..........................................................................................................5
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT REGULATIONS 2006 (WEEE)...........6
GLENSOUND EXPRESSIP MINI MANUAL ........................................................................7
OVERVIEW...................................................................................................................8
EXPRESSIP MINI FRONT PANEL LAYOUT........................................................................9
EXPRESSIP MINI REAR PANEL LAYOUT ........................................................................12
SIMPLIFIED BLOCK DIAGRAM ..............................................................................13
CONNECTING THE ExpressIP MINI TO A DANTE® NETWORK .........................................14
Getting Dante®Controller.......................................................................................14
Connecting ExpressIP MINI To the Network .............................................................14
Audio Over IP Network ...........................................................................................14
Running Dante®Controller .....................................................................................15
Dante® Controller TIP ...........................................................................................15
Device Not Showing Up In Dante® Controller .........................................................16
AES67 MODE.............................................................................................................17
BUTTON FUNCTIONALITY..........................................................................................20
LED INDICATION OF MODES...................................................................................20
A & B MIC ON ......................................................................................................20
TALKBACK SWITCHES ..........................................................................................20
WIRING INFORMATION..........................................................................................21
XLR & JACK Wiring...............................................................................................21
Page 8of 21
OVERVIEW
The Glensound ExpressIP MINI is a compact two user commentary box providing all of
the basic functionality required for two commentators or announcers, where quick and
easy setup and operation is important.
It is widely used for sports commentary, reporter interfacing at news events, or for
studio based audio translation.
There are four audio inputs into the users’ headphones for monitoring, and two
talkback circuits. High quality mic amps are used, along with Glensound’s Referee
compressor/limiter system to help prevent overloading the input circuit.
The Main audio input/output interfacing is provided via the Dante® system, allowing
uncompressed, low delay audio across networks.
Dante® network audio is a common protocol for distributing high quality linear audio
over standard IP networks and it is widely used by many audio equipment
manufacturers.
The Expressip MINI Dante® audio interface is compatible with all Dante® audio
interfaces across all manufacturers. Further details of Dante® network audio can be
found at www.audinate.com
The Expressip Mini is also AES67 compliant.
Page 9of 21
EXPRESS
IP
MINI FRONT PANEL LAYOUT
1. LED PPM Meter
The LED PPM Meter indicates the level of outgoing audio in dBu (whereby 0dBU
= -18dBFs) the BBC 1 –7 scale is also provided.
2. Mic on button
Pressing this button routes the microphone to the programme audio output. It
is a latching button by default but can be set to be always on, or a momentary
mute when held down. More information can be found on page 15.
1. LED PPM
Meter
2. Mic on
button
3. Headphone mixer pots
4. Headphone jack
output
5. XLR Mic input
6. Phantom power
switch
7. Talkback
buttons
8. Input Gain
Page 10 of 21
3. Headphone mixer knobs
COMM B & A
This pot adjusts the mic audio level of the opposing channel for the headphone
output.
SIDETONE
This pot adjusts the level of the mic audio for the headphone output.
PGM
This pot adjusts the headphone level of the PGM audio signal which can be sent
via Dante®.
CUE
This pot adjusts the headphone level of the CUE audio signal which can be sent
via Dante®.
TB 1
This pot adjusts the headphone level of the Talkback 1 audio signal which can
be sent via Dante®.
TB 2
This pot adjusts the headphone level of the Talkback 2 audio signal which can
be sent via Dante®.
4. Talkback buttons
Pressing either talkback 1 or talkback 2 mutes the microphone on the
programme output, and routes the audio to the corresponding talkback output.
The operation of this button is configurable into 4 modes (momentary, latching,
intelligent, off). See page 15 for details.
5. Headphone jack output
The 6.35mm jack socket allows 35 –1000Ωimpedance headphones using A/B
gauge plug.
Inhaltsverzeichnis
Andere Glensound Stereoanlage Handbücher
