Globe 50279 Bedienungsanleitung

SMART WI-FI

UNIVERSAL REMOTE

SKU 50279

SPECIFICATIONS

• Standby current: ≤ 0.8A

• Working current: 1A

• Wireless type: 2.4 GHz

• Wireless range: Circular radius 8m ( 26.2 ft)

• Wireless Protocol: IEEE 802.11b/g/n

WARNING - To reduce the risk of ﬁre, electric shock, or serious

personal injury:

• Do not immerse the product in water or other liquids.

• This product is not intended for use by children and contains small

parts that may pose a choking hazard to children under the age of

three. Keep the product out of the reach of children and pets.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

READ ALL INSTRUCTIONS BEFORE USE

SPECIFICATIONS

• Standby current: ≤ 0.8A

• Working current: 1A

• Wireless type: 2.4 GHz

• Wireless range: Circular radius 8m ( 26.2 ft)

• Wireless Protocol: IEEE 802.11b/g/n

WARNING - To reduce the risk of ﬁre, electric shock, or serious

personal injury:

• Do not immerse the product in water or other liquids.

• This product is not intended for use by children and contains small

parts that may pose a choking hazard to children under the age of

three. Keep the product out of the reach of children and pets.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

READ ALL INSTRUCTIONS BEFORE USE

WHAT’S IN THE BOX

PRODUCT INFORMATION

micro usb port

reset button

smart universal

remote

USB cable

0.7m (2.30 ft)

HOW TO POWER THE UNIVERSAL REMOTE

• Take your universal remote and the included micro USB cable. Insert

cable underneath the remote and plug into a USB adapter (not

included).

• Once connected, the universal remotes LED (located at the front) will

be ﬂashing rapidly

• If the remote is not ﬂashing rapidly. Press and hold the reset button

located underneath for 5 seconds. Repeat process if not successful.

To pair the universal remote

see the quick start guide or

follow the how to guide

within the Globe Suite app.

MOUNTING INSTRUCTIONS

• You can simply place the universal remote on any ﬂat surface.

• Ensure that the remote is within range of the products you wish to

control. Circular radius of 8m (26.2ft)

• This item can be used with an extension cord if needed.

HOW TO POWER THE UNIVERSAL REMOTE

• Take your universal remote and the included micro USB cable. Insert

cable underneath the remote and plug into a USB adapter (not

included).

• Once connected, the universal remotes LED (located at the front) will

be ﬂashing rapidly

• If the remote is not ﬂashing rapidly. Press and hold the reset button

located underneath for 5 seconds. Repeat process if not successful.

To pair the universal remote

see the quick start guide or

follow the how to guide

within the Globe Suite app.

MOUNTING INSTRUCTIONS

• You can simply place the universal remote on any ﬂat surface.

• Ensure that the remote is within range of the products you wish to

control. Circular radius of 8m (26.2ft)

• This item can be used with an extension cord if needed.

FEDERAL COMMUNICATION COMMISSION

INTERFERENCE STATEMENT

CAUTION:

This device is intended for indoor use. Do not use where directly

exposed to water. Do not recharge, crush, disassemble, heat above 85

℃, incinerate, or expose content to water. Fire explosion, and severe

burn hazard may ensue. This device complies with Part 15 of the FCC

rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may

cause undesired operation. Any changes or modiﬁcations not

expressly approved by the manufacturer could void the user’s

authority to operate the equipment.

LIMITED WARRANTY

This device is warranted for 1 year from the date of purchase. If it fails

before that time, we will replace it. Send Globe Electric the sensor,

proof of purchase and register receipt along with your complete name

and address. See caution text for proper use. This warranty is void if

this product is misused in any way. This replacement is the sole

remedy available and liability for incidental or consequential damage

is expressly excluded.

WARNING:

Changes or modiﬁcations to this unit not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment. NOTE: This equipment has been tested and

found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation

between the equipment and receiver. Connect the equipment into an

outlet on a circuit different from that to which the receiver is

connected. Consult the dealer or an experienced radio/TV technician

for help.

RF Exposure

The equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment. This device should be installed and

operated with minimum distance 20cm between the radiator &

your body.

User Manual Notice for Licence-Exempt Radio Apparatus

This device complies with Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this device must accept

any interference, including interference that may cause undesired

operation of the device.CAN ICES-3 (B)

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for

an uncontrolled environment. This equipment should be installed and

operated with minimum distance 20cm between the radiator &

your body.