Glow Brand C95 & C140 General Information
9
1.2 General information
1.2.1 General Installation Requirements
The installation of your Glow Brand combination boiler must conform to the
requirements of this manual, your local authority, and the National Fuel Gas Code
ANSI Z223.1 and or CAN/CGA B149 Installation Codes. Where required by the
Authority, the installation must conform to the standard for “Controls and Safety
Devices for Automatically Fired Boilers ANSI/ASME CSD-1.
This document pertains to the correct instruction and installation of the Glow
Brand Combination Boilers C95 and C140. The instructions detailed in this
document supersede any and all previous instructions provided by Glow Brand
Manufacturing, written or otherwise. Each unit is provided with an Installation
Manual and a User Information Manual
1.2.2 User Responsibilities
The Glow Combi Boiler must be installed and serviced by a qualied service
technician and must be serviced and inspected annually when operating in
normal residential applications. Demanding applications or extreme conditions
(i.e. commercial) may require more frequent service and inspection. As the User/
Owner of this equipment, you are responsible for ensuring the maintenance is
performed at the required intervals; see Section 14.2- Annual Maintenance and
Inspection.
1.2.3 Installer Responsibilities
A qualied installer is a licensed person who had the appropriate training and a
working knowledge of the applicable codes, regulations, tools, equipment and
methods necessary to install a boiler. The installer assumes all responsibility
for a safe installation and that it meets the requirements of the boiler instruction
manuals, as well as National and local installation codes. It is also the installer’s
responsibility to inform the User/Owner of their obligation with respect to the
description under “User Responsibilities”. Failure to follow this warning could
result in re, serious injury, or death
Natural Gas to Liqueed Petroleum (Lp) conversions kits are not available.
The materials used, such as copper, brass, stainless steel, etc., form a compact,
homogeneous, highly functional unit that is easy to install and simple to operate.
In its simplicity, the wall-mounted appliance is equipped with all the appropriate
accessories required to make it a fully independent combi boiler capable of
satisfying domestic hot water production and central heating (maximum set
point of 60°C/140°F)needs if installed. All combi boilers are fully inspected. This
manual must be kept in a safe place and must accompany the water heater at all
times.
Glow Brand will not be held responsible for any misinterpretation of this manual.
Glow Brand will not be held responsible for the consequences in the case of
non-observance of the instructions contained in this manual or in the case where
actions not specically described herein are undertaken.
DANGER
Read and understand this
entire document prior to
proceeding with the
installation of the Glow Combi
Boiler. Failure to follow the
instructions outlined in this
document will result in
property damage, serious
injury or death.
WARNING
Failure to have the boiler
properly serviced and
inspected on a regular basis by
a qualied service technician
may result in property damage,
serious injury or death.
WARNING
Failure to keep the Vent and
Combustion Air-inlet clear of
ice, snow, and other debris
may result in property damage,
serious injury, or death.
DANGER
Failure to use the appropriate
gas as listed on the rating
plate when operating the Glow
Combi Boiler may result in
extremely dangerous burner
operation leading to property
damage, serious injury or
death. Always ensure the type
of gas being used corresponds
with what is listed on the
rating plate
