BlueConnect
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0 Fax: -58080-11 Page 3 / 26
www.go-sys.de info@go-sys.de
Table of Contents
1 Introduction ....................................................................................................................................................................................................3
2 Description of the BlueConnect Modules ......................................................................................................................................................4
2.1 System Setup Examples..........................................................................................................................................................................4
3 Technical Data and Connections...................................................................................................................................................................5
3.1 Opening the Module Housing.................................................................................................................................................................5
3.2 Cable Connections, Switch Positions and LEDs ....................................................................................................................................6
3.3 PIN Assignment .......................................................................................................................................................................................9
3.4 PIN Assignment CAN bus at the BlueBox ...............................................................................................................................................9
4 Configuring the BlueConnect Modules with the Program Modbus Tool.exe............................................................................................10
4.1 Preparation ...........................................................................................................................................................................................10
4.2 The Start Window..................................................................................................................................................................................11
4.3 The Info Window....................................................................................................................................................................................11
4.4 The Calibration Window .......................................................................................................................................................................12
4.4.1 The Calibration Table....................................................................................................................................................................13
4.5 Configuring the Sensor Modules ..........................................................................................................................................................14
4.5.1 The Parameter Window ................................................................................................................................................................14
4.5.2 The Calibration Window O2 ..........................................................................................................................................................15
4.5.3 The Measurement Value Recording Window...............................................................................................................................16
4.6 Configuring the Current Input Module.................................................................................................................................................17
4.7 Configuring the Current Output Module..............................................................................................................................................18
4.8 Configuring Older Bus Modules............................................................................................................................................................19
5 Modbus Address Overview of the Sensor Modules......................................................................................................................................20
Appendix A – Interior Cover Stickers...............................................................................................................................................................24
Appendix B – EU Declaration of Conformity...................................................................................................................................................26
1 Introduction
This manual describes the BlueConnect Modules of GO Systemelektronik.
BlueConnect Modules are available in four basic variants: as Sensor Module, Bus Module, Current Module and
RS232 Module. At the completion of this manual, the following types of design were available:
pH + Temp. 486 C000-5 Conductivity 486 C000-MOD
ISE + Temp. 486 C000-7 Oil in Water and Turbidity
ORP + Temp. 486 C000-9 Turbidity (flow through) 486 C000-TURB
Current Modules Article No.
Current Input 486 C000-mAI
Current Output 486 C000-mAO
486 C000-RSXX
The type of version can be found on the sticker on
the front of the housing or via the article num-
ber on the type plate on the right-
housing .
The products of GO Systemelektronik are constantly being developed, therefore deviations between this
manual and the delivered product can result. Please understand that no legal claims can be derived from the
contents of this manual.
