Goddess WFD 1025 M8 Bedienungsanleitung
ELECTRONIC WASHING MACHINE
GODDESS WFD 1025 M8
INSTRUCTION MANUAL
BEFORE USING THE WASHING MACHINE, YOU SHOULD
CERTAINLY READ THE INFORMATION IN USER’S MANUAL
ENG
ENG - 2
THE CONTENTS
SECTION 1: BEFORE USING ............................................................................. 3
Safety warnings .................................................................................................... 3
Recommendations ................................................................................................ 3
SECTION 2: INSTALLATION .............................................................................. 4
Removal of transportation screws ........................................................................ 4
Adjustment of feet ................................................................................................. 4
Electrical connection ............................................................................................. 5
Water supply connection ...................................................................................... 5
Water drain connection ......................................................................................... 6
SECTION 3: TECHNICAL SPECIFICATIONS ..................................................... 6
SECTION 4: CONTROL PANEL .......................................................................... 7
Start/Pause button ................................................................................................ 7
Function indicator lights ........................................................................................ 7
Function buttons ................................................................................................... 7
Temperature knob ................................................................................................. 9
Program knob ....................................................................................................... 9
SECTION 5: WASHING YOUR LAUNDRY ......................................................... 9
Before washing ..................................................................................................... 10
Running the machine ............................................................................................ 11
SECTION 6: MAINTENANCE AND CLEANING ................................................. 13
Water inlet lters ................................................................................................... 13
Pump lter ............................................................................................................ 14
Detergent drawer .................................................................................................. 15
Siphon plug ........................................................................................................... 15
The cabinet ........................................................................................................... 15
The drum .............................................................................................................. 16
Remove of your machine from lime ...................................................................... 16
SECTION 7: PRACTICAL INFORMATION ......................................................... 16
SECTION 8: AVOIDING MINOR FAULTS ........................................................... 18
SECTION 9: AUTOMATIC FAILURE DETECTION SYSTEM ............................. 19
SECTION 10: INTERNATIONAL WASHING SIGNS ........................................... 20
ENG
ENG - 3
SECTION 1: BEFORE USING
SAFETY WARNINGS
• Do not use a multiple socket or extension cord.
• Do not insert a plug with damaged or broken cord into the socket.
• If the cord is damaged it should be replaced by the manufacturer or appointed service agent
in order to avoid a hazard.
• Never remove the plug from the socket by pulling from the cord section. Remove the plug by
holding.
• Do not plug the power supply with wet hands.
• Never touch the machine with wet hands or feet.
• Never open the detergent drawer while the device is running.
• Never force to open the door of the machine while the machine is running.
• Since the machine can reach high temperatures while running, do not touch the drain hose
and water during draining.
• In case of any failure, first unplug the device and close the water tap.
Do not attempt to repair. Please apply to the nearest authorized service station.
• Do not forget that the packing material of your machine may be hazardous for children.
• Do not let your children play with the washing machine.
• Keep your pet away from your machine.
• Your machine should only be used by adults within the information written in this manual.
• Your machine is designed for use in house environment. Warranty will be invalid if you use it
for commercial purposes.
• The appliance should not be put on a carpet which can block the air ventilation on the bottom
side.
RECOMMENDATIONS
• The detergent or softener in contact with air for a long time will dry and stick to your detergent
drawer.To avoid this put your detergent and softener into the detergent drawer just before
washing.
• It is recommended that you use pre-washing program for only very dirty clothes.
• Please do not exceed the maximum loading capacity.
• The appliance is not intended for use by people (including children) with reduced physical,
sensor yor mental capabilities , or lack of experience and knowledge , unless they have been
given supervision or instruction concerning use of the appliance by a preson responsible for
their safety.Children should be supervised to ensure that they don’t play with the appliance.
• If you will not use your machine for a long time, unplug your machine, close the water supply
and leave the door open in order to keep the inside of the machine dry and for prevention
from unpleasant odour.
• As a result of the quality control procedures, a certain amount of water may remain in your
machine. This is not harmful for your machine.
ENG
ENG - 4
SECTION 2: INSTALLATION
You must pay attention to the following issues before using your washing machine.
REMOVAL OF TRANSPORTATION SCREWS
• Transportation screws, which are located at the back side of the machine, must be removed
before running the machine.
• Loosen the screws by rotating counterclockwise by a suitable wrench. (DIAGRAM-1)
• Remove the screws by pulling them. (DIAGRAM-2)
• To the holes where the transport screws have been removed, insert the plastic transport
screw taps found in the accessories bag. (DIAGRAM-3)
• The transportation screws, that have been removed from the machine should be kept in hand
for any other transportation necessities.
ADJUSTMENT OF FEET
• Do not install your machine on rugs or similar surfaces.
• For your machine to work silently and without any vibration, it should be settled on a at,
non-slippery and tough ground.
• You can adjust the balance of your machine from its feet.
• First, loosen the plastic adjustment nut.
• Adjust by rotating the feet upwards or downwards.
• After the balance has been reached, tighten the plastic adjustment nut again by rotating it
upwards.
• Never put cartons, wooden blocks or similar materials under the machine to balance the irre-
gularities on the level of the ground.
ENG
ENG - 5
ELECTRICAL CONNECTION
• Your washing machine works with 220-240V and 50Hz.
• A special grounded plug has been attached to the network cable of your washing machine.
This plug must denitely be inserted to a grounded socket with 10 ampere. The fuse ow
value of the electricity line attached to this should also be 10 ampere. If you have no such
sockets and fuses in your house, let it be made by a qualied electrician.
• Our company will not be responsible for any damages that may occur as a result of
usage without grounding.
• Insert the machine’s plug to a grounded socket which you can easly reach.
WATER SUPPLY CONNECTION
• Your machine has a single water (cold) inlet.
• To prevent from the leakages on the connection joints, 1 seal is included in the hose
packing.(Fit this seal on the end of the water inlet hose at the tap side.)
• Connect the end with bracket of the water inlet hose to the water inlet valve at the rear of the
machine and the other end to your tap. In situations where you are not assured, let a qualied
plumber make the connection works.
• Water pressure of 0,1-1 MPa from your tap will enable your machine to work more
efciently.(0,1 MPa pressure means water ow of more than 8 liters in 1 minute from
a fully opened tap)
• After connections are completed, check for the non-leakage of the connection joints
by turning on your tap completely.
• Be sure that water inlet hoses are not folded, broken or crushed.
• Mount the water inlet hoses to a 3”/4, geared water tap.
ENG
ENG - 6
WATER DRAIN CONNECTION
• Be sure that water inlet hoses are not folded, twisted, crushed or elongated by stretching.
• Water drain hose should be mounted at a height of minimum 60 cm, maximum 100 cm from
the ground.
• The end of the water drain hose may directly be tted to the dirty water outlet hole or a special
apparatus mounted on the outlet bracket of the wash-stand.
• Never attempt to extend the water drain hose by adding extra parts.
SECTION 3: TECHNICAL SPECIFICATIONS
Brand Goddess
Model WFD1025M8
Energy class A+
Voltage/Frekvency (V/Hz) (220-240) V/ 50Hz
Electrical current (A) 10
Water presure (Mpa) Max. 1 Mpa/ Min. 0,1 Mpa
Power rating (W) 2100
Maximum dry laundry capacity (kg) 5
Recommended loading (kg) 4,5
Height (cm) 85
Width (cm) 59,6
Depth (cm) 51
Maximum spin cycle ( rpm ) 1000
ENG
ENG - 7
SECTION 4: CONTROL PANEL
WFD1025M8 (3 buttons, adjustable thermostat)
1) Detergent drawer
2) Start/pause light
3) Function indicator lights
4) Temperature adjustment knob
5) Program ready light
6) Program knob
7) Start/pause button
8) Function buttons
9) Program end light
ENG
ENG - 8
START/PAUSE BUTTON
Used to start a selected program or pause during running.
WARNING!
It is required for the program knob to be brought to O (off) position before selecting
the program or changing a continuing program.
FUNCTION INDICATOR LIGHTS
When the start/pause button or any function button is pressed, the corresponding light
turns on.The light turns off when the function button or start/pause button is re-pressed,
or when the process the selected function is completed.
The function indicator lights are also used in failure detection system mentioned in section 9.
FUNCTION BUTTONS
(depends on selected model – see the control panel of your washing machine)
No spin
This program is recommended to be used for your sensitive clothes on which no
spinning should be done. By pressing this function button, you can cancel the spinning
process which is included in the program.
Easy ironing
By using this function, you can ensure your clothes to come out less wrinkled after
the washing.
Cold wash
When this button is pressed, your clothes are washed with cold water. With this function,
you can wash your slightly dirty clothes using less energy and water.
WARNING!
Functions vary depending on the model you have chosen. If you forgot to use additional
function and your machine starts to wash push the additional function button
if the indicator light is on. Additional function will be activated.If the indicator light is not
on, additional function will not be activated.
ENG
ENG - 9
TEMPARATURE ADJUSTMENT KNOB (FOR WFD1025M8 ONLY)
By the temparature adjustment knob, you can adjust the washing water temparature of your
clothes between O (cold wash) and 90˚C. When you are selecting the washing water
temparature, pay attention to the international washing signs on your clothes.
PROGRAM KNOB
With the program knob, you can select the program with which you desire to wash your clothes.
You can adjust the program selection process by turning the program knob in both directions.
You must be careful that the adjustment sign of the program knob is exactly on the program
you want to select. When you bring the program knob to O (off) position, while your machine
is running, your program will remain incomplete.
SECTION 5: WASHING YOUR LAUNDRY
• Plug the machine.
• Open the tap water.
First wash cycle
There may be water left inside your machine after factory tests and trials.It is recommended that
the rst wash cycle should be made without any laundry so that carry out this water; pour half
a measuring cup of normal allpurpose detergent into compartment 2 and select cotton program
at 90°C.
ENG
ENG - 10
BEFORE WASHING
Discrimination of your laundry
• Discriminate your clothes according to their types (cotton, synthetic, sensitive, woolen, etc.),
washing temperatures and level of dirtiness.
• Never wash your white and coloured clothes together.
• Since your new coloured clothes may shed dye on the rst wash, wash them separately.
• Be careful that no metal pieces are found on or in the pockets of your clothes, remove if there
is any.
• Zip and button your clothes.
• Remove the plastic or metal hooks of the curtains and laces or place them inside a washing
bag and tie.
Pull the textiles like trousers,knitted fabric,t-shirt and sweat shirt inside out.
Wash your small clothes like socks and handkerchiefs in a washing bag.
Wash up to 90˚C Wash up to 60˚C Wash up to 30˚C Not washable
in washing machine
Placement of the clothes into the machine
• Open the door of your machine.
• Fill your clothes in your machine in a well-spread manner.
• Place each cloth separately.
• When you shut the door of your machine, be careful that no cloth is jammed between the
cover and the gasket.
• Shut the door of your machine tightly otherwise your machine will not start the washing pro-
cess.
Inhaltsverzeichnis
Andere Goddess Waschmaschine Handbücher
Goddess
Goddess WFE 1046D9S Bedienungsanleitung
Goddess
Goddess WFD 815 M8S Bedienungsanleitung
Goddess
Goddess WFE 1035 M9SD Bedienungsanleitung
Goddess
Goddess WFE 1036 M10 Bedienungsanleitung
Goddess
Goddess WFE1015M8S Bedienungsanleitung
Goddess
Goddess WFE 1036 M10D Bedienungsanleitung
Goddess
Goddess WFE 1035 M9D Bedienungsanleitung
Goddess
Goddess WFE 1036 M9 Bedienungsanleitung
